2015-07-07 02:54:22 +02:00
|
|
|
// Copyright 2014 The go-ethereum Authors
|
2015-07-22 18:48:40 +02:00
|
|
|
// This file is part of the go-ethereum library.
|
2015-07-07 02:54:22 +02:00
|
|
|
//
|
2015-07-23 18:35:11 +02:00
|
|
|
// The go-ethereum library is free software: you can redistribute it and/or modify
|
2015-07-07 02:54:22 +02:00
|
|
|
// it under the terms of the GNU Lesser General Public License as published by
|
|
|
|
// the Free Software Foundation, either version 3 of the License, or
|
|
|
|
// (at your option) any later version.
|
|
|
|
//
|
2015-07-22 18:48:40 +02:00
|
|
|
// The go-ethereum library is distributed in the hope that it will be useful,
|
2015-07-07 02:54:22 +02:00
|
|
|
// but WITHOUT ANY WARRANTY; without even the implied warranty of
|
2015-07-22 18:48:40 +02:00
|
|
|
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
2015-07-07 02:54:22 +02:00
|
|
|
// GNU Lesser General Public License for more details.
|
|
|
|
//
|
|
|
|
// You should have received a copy of the GNU Lesser General Public License
|
2015-07-22 18:48:40 +02:00
|
|
|
// along with the go-ethereum library. If not, see <http://www.gnu.org/licenses/>.
|
2015-07-07 02:54:22 +02:00
|
|
|
|
2014-11-13 20:31:48 +01:00
|
|
|
package rlp
|
|
|
|
|
|
|
|
import (
|
2015-12-21 21:05:20 +01:00
|
|
|
"fmt"
|
2014-11-13 20:31:48 +01:00
|
|
|
"reflect"
|
|
|
|
"sync"
|
2021-05-22 13:34:29 +02:00
|
|
|
"sync/atomic"
|
rlp/rlpgen: RLP encoder code generator (#24251)
This change adds a code generator tool for creating EncodeRLP method
implementations. The generated methods will behave identically to the
reflect-based encoder, but run faster because there is no reflection overhead.
Package rlp now provides the EncoderBuffer type for incremental encoding. This
is used by generated code, but the new methods can also be useful for
hand-written encoders.
There is also experimental support for generating DecodeRLP, and some new
methods have been added to the existing Stream type to support this. Creating
decoders with rlpgen is not recommended at this time because the generated
methods create very poor error reporting.
More detail about package rlp changes:
* rlp: externalize struct field processing / validation
This adds a new package, rlp/internal/rlpstruct, in preparation for the
RLP encoder generator.
I think the struct field rules are subtle enough to warrant extracting
this into their own package, even though it means that a bunch of
adapter code is needed for converting to/from rlpstruct.Type.
* rlp: add more decoder methods (for rlpgen)
This adds new methods on rlp.Stream:
- Uint64, Uint32, Uint16, Uint8, BigInt
- ReadBytes for decoding into []byte
- MoreDataInList - useful for optional list elements
* rlp: expose encoder buffer (for rlpgen)
This exposes the internal encoder buffer type for use in EncodeRLP
implementations.
The new EncoderBuffer type is a sort-of 'opaque handle' for a pointer to
encBuffer. It is implemented this way to ensure the global encBuffer pool
is handled correctly.
2022-02-16 18:14:12 +01:00
|
|
|
|
|
|
|
"github.com/ethereum/go-ethereum/rlp/internal/rlpstruct"
|
2014-11-13 20:31:48 +01:00
|
|
|
)
|
|
|
|
|
2021-05-22 13:34:29 +02:00
|
|
|
// typeinfo is an entry in the type cache.
|
2014-11-13 20:31:48 +01:00
|
|
|
type typeinfo struct {
|
2019-05-14 15:09:56 +02:00
|
|
|
decoder decoder
|
|
|
|
decoderErr error // error from makeDecoder
|
|
|
|
writer writer
|
|
|
|
writerErr error // error from makeWriter
|
2014-11-13 20:31:48 +01:00
|
|
|
}
|
|
|
|
|
rlp: improve nil pointer handling (#20064)
* rlp: improve nil pointer handling
In both encoder and decoder, the rules for encoding nil pointers were a
bit hard to understand, and didn't leave much choice. Since RLP allows
two empty values (empty list, empty string), any protocol built on RLP
must choose either of these values to represent the null value in a
certain context.
This change adds choice in the form of two new struct tags, "nilString"
and "nilList". These can be used to specify how a nil pointer value is
encoded. The "nil" tag still exists, but its implementation is now
explicit and defines exactly how nil pointers are handled in a single
place.
Another important change in this commit is how nil pointers and the
Encoder interface interact. The EncodeRLP method was previously called
even on nil values, which was supposed to give users a choice of how
their value would be handled when nil. It turns out this is a stupid
idea. If you create a network protocol containing an object defined in
another package, it's better to be able to say that the object should be
a list or string when nil in the definition of the protocol message
rather than defining the encoding of nil on the object itself.
As of this commit, the encoding rules for pointers now take precedence
over the Encoder interface rule. I think the "nil" tag will work fine
for most cases. For special kinds of objects which are a struct in Go
but strings in RLP, code using the object can specify the desired
encoding of nil using the "nilString" and "nilList" tags.
* rlp: propagate struct field type errors
If a struct contained fields of undecodable type, the encoder and
decoder would panic instead of returning an error. Fix this by
propagating type errors in makeStruct{Writer,Decoder} and add a test.
2019-09-13 11:10:57 +02:00
|
|
|
// typekey is the key of a type in typeCache. It includes the struct tags because
|
|
|
|
// they might generate a different decoder.
|
2015-04-17 01:16:46 +02:00
|
|
|
type typekey struct {
|
|
|
|
reflect.Type
|
rlp/rlpgen: RLP encoder code generator (#24251)
This change adds a code generator tool for creating EncodeRLP method
implementations. The generated methods will behave identically to the
reflect-based encoder, but run faster because there is no reflection overhead.
Package rlp now provides the EncoderBuffer type for incremental encoding. This
is used by generated code, but the new methods can also be useful for
hand-written encoders.
There is also experimental support for generating DecodeRLP, and some new
methods have been added to the existing Stream type to support this. Creating
decoders with rlpgen is not recommended at this time because the generated
methods create very poor error reporting.
More detail about package rlp changes:
* rlp: externalize struct field processing / validation
This adds a new package, rlp/internal/rlpstruct, in preparation for the
RLP encoder generator.
I think the struct field rules are subtle enough to warrant extracting
this into their own package, even though it means that a bunch of
adapter code is needed for converting to/from rlpstruct.Type.
* rlp: add more decoder methods (for rlpgen)
This adds new methods on rlp.Stream:
- Uint64, Uint32, Uint16, Uint8, BigInt
- ReadBytes for decoding into []byte
- MoreDataInList - useful for optional list elements
* rlp: expose encoder buffer (for rlpgen)
This exposes the internal encoder buffer type for use in EncodeRLP
implementations.
The new EncoderBuffer type is a sort-of 'opaque handle' for a pointer to
encBuffer. It is implemented this way to ensure the global encBuffer pool
is handled correctly.
2022-02-16 18:14:12 +01:00
|
|
|
rlpstruct.Tags
|
2015-04-17 01:16:46 +02:00
|
|
|
}
|
|
|
|
|
2014-12-30 11:40:32 +01:00
|
|
|
type decoder func(*Stream, reflect.Value) error
|
|
|
|
|
rlp/rlpgen: RLP encoder code generator (#24251)
This change adds a code generator tool for creating EncodeRLP method
implementations. The generated methods will behave identically to the
reflect-based encoder, but run faster because there is no reflection overhead.
Package rlp now provides the EncoderBuffer type for incremental encoding. This
is used by generated code, but the new methods can also be useful for
hand-written encoders.
There is also experimental support for generating DecodeRLP, and some new
methods have been added to the existing Stream type to support this. Creating
decoders with rlpgen is not recommended at this time because the generated
methods create very poor error reporting.
More detail about package rlp changes:
* rlp: externalize struct field processing / validation
This adds a new package, rlp/internal/rlpstruct, in preparation for the
RLP encoder generator.
I think the struct field rules are subtle enough to warrant extracting
this into their own package, even though it means that a bunch of
adapter code is needed for converting to/from rlpstruct.Type.
* rlp: add more decoder methods (for rlpgen)
This adds new methods on rlp.Stream:
- Uint64, Uint32, Uint16, Uint8, BigInt
- ReadBytes for decoding into []byte
- MoreDataInList - useful for optional list elements
* rlp: expose encoder buffer (for rlpgen)
This exposes the internal encoder buffer type for use in EncodeRLP
implementations.
The new EncoderBuffer type is a sort-of 'opaque handle' for a pointer to
encBuffer. It is implemented this way to ensure the global encBuffer pool
is handled correctly.
2022-02-16 18:14:12 +01:00
|
|
|
type writer func(reflect.Value, *encBuffer) error
|
2014-11-13 20:31:48 +01:00
|
|
|
|
2021-05-22 13:34:29 +02:00
|
|
|
var theTC = newTypeCache()
|
|
|
|
|
|
|
|
type typeCache struct {
|
|
|
|
cur atomic.Value
|
|
|
|
|
|
|
|
// This lock synchronizes writers.
|
|
|
|
mu sync.Mutex
|
|
|
|
next map[typekey]*typeinfo
|
|
|
|
}
|
|
|
|
|
|
|
|
func newTypeCache() *typeCache {
|
|
|
|
c := new(typeCache)
|
|
|
|
c.cur.Store(make(map[typekey]*typeinfo))
|
|
|
|
return c
|
|
|
|
}
|
|
|
|
|
2019-05-14 15:09:56 +02:00
|
|
|
func cachedDecoder(typ reflect.Type) (decoder, error) {
|
2021-05-22 13:34:29 +02:00
|
|
|
info := theTC.info(typ)
|
2019-05-14 15:09:56 +02:00
|
|
|
return info.decoder, info.decoderErr
|
|
|
|
}
|
|
|
|
|
|
|
|
func cachedWriter(typ reflect.Type) (writer, error) {
|
2021-05-22 13:34:29 +02:00
|
|
|
info := theTC.info(typ)
|
2019-05-14 15:09:56 +02:00
|
|
|
return info.writer, info.writerErr
|
|
|
|
}
|
|
|
|
|
2021-05-22 13:34:29 +02:00
|
|
|
func (c *typeCache) info(typ reflect.Type) *typeinfo {
|
|
|
|
key := typekey{Type: typ}
|
|
|
|
if info := c.cur.Load().(map[typekey]*typeinfo)[key]; info != nil {
|
2019-05-14 15:09:56 +02:00
|
|
|
return info
|
2014-11-13 20:31:48 +01:00
|
|
|
}
|
2021-05-22 13:34:29 +02:00
|
|
|
|
|
|
|
// Not in the cache, need to generate info for this type.
|
rlp/rlpgen: RLP encoder code generator (#24251)
This change adds a code generator tool for creating EncodeRLP method
implementations. The generated methods will behave identically to the
reflect-based encoder, but run faster because there is no reflection overhead.
Package rlp now provides the EncoderBuffer type for incremental encoding. This
is used by generated code, but the new methods can also be useful for
hand-written encoders.
There is also experimental support for generating DecodeRLP, and some new
methods have been added to the existing Stream type to support this. Creating
decoders with rlpgen is not recommended at this time because the generated
methods create very poor error reporting.
More detail about package rlp changes:
* rlp: externalize struct field processing / validation
This adds a new package, rlp/internal/rlpstruct, in preparation for the
RLP encoder generator.
I think the struct field rules are subtle enough to warrant extracting
this into their own package, even though it means that a bunch of
adapter code is needed for converting to/from rlpstruct.Type.
* rlp: add more decoder methods (for rlpgen)
This adds new methods on rlp.Stream:
- Uint64, Uint32, Uint16, Uint8, BigInt
- ReadBytes for decoding into []byte
- MoreDataInList - useful for optional list elements
* rlp: expose encoder buffer (for rlpgen)
This exposes the internal encoder buffer type for use in EncodeRLP
implementations.
The new EncoderBuffer type is a sort-of 'opaque handle' for a pointer to
encBuffer. It is implemented this way to ensure the global encBuffer pool
is handled correctly.
2022-02-16 18:14:12 +01:00
|
|
|
return c.generate(typ, rlpstruct.Tags{})
|
2021-05-22 13:34:29 +02:00
|
|
|
}
|
|
|
|
|
rlp/rlpgen: RLP encoder code generator (#24251)
This change adds a code generator tool for creating EncodeRLP method
implementations. The generated methods will behave identically to the
reflect-based encoder, but run faster because there is no reflection overhead.
Package rlp now provides the EncoderBuffer type for incremental encoding. This
is used by generated code, but the new methods can also be useful for
hand-written encoders.
There is also experimental support for generating DecodeRLP, and some new
methods have been added to the existing Stream type to support this. Creating
decoders with rlpgen is not recommended at this time because the generated
methods create very poor error reporting.
More detail about package rlp changes:
* rlp: externalize struct field processing / validation
This adds a new package, rlp/internal/rlpstruct, in preparation for the
RLP encoder generator.
I think the struct field rules are subtle enough to warrant extracting
this into their own package, even though it means that a bunch of
adapter code is needed for converting to/from rlpstruct.Type.
* rlp: add more decoder methods (for rlpgen)
This adds new methods on rlp.Stream:
- Uint64, Uint32, Uint16, Uint8, BigInt
- ReadBytes for decoding into []byte
- MoreDataInList - useful for optional list elements
* rlp: expose encoder buffer (for rlpgen)
This exposes the internal encoder buffer type for use in EncodeRLP
implementations.
The new EncoderBuffer type is a sort-of 'opaque handle' for a pointer to
encBuffer. It is implemented this way to ensure the global encBuffer pool
is handled correctly.
2022-02-16 18:14:12 +01:00
|
|
|
func (c *typeCache) generate(typ reflect.Type, tags rlpstruct.Tags) *typeinfo {
|
2021-05-22 13:34:29 +02:00
|
|
|
c.mu.Lock()
|
|
|
|
defer c.mu.Unlock()
|
|
|
|
|
|
|
|
cur := c.cur.Load().(map[typekey]*typeinfo)
|
|
|
|
if info := cur[typekey{typ, tags}]; info != nil {
|
|
|
|
return info
|
|
|
|
}
|
|
|
|
|
|
|
|
// Copy cur to next.
|
|
|
|
c.next = make(map[typekey]*typeinfo, len(cur)+1)
|
|
|
|
for k, v := range cur {
|
|
|
|
c.next[k] = v
|
|
|
|
}
|
|
|
|
|
|
|
|
// Generate.
|
|
|
|
info := c.infoWhileGenerating(typ, tags)
|
|
|
|
|
|
|
|
// next -> cur
|
|
|
|
c.cur.Store(c.next)
|
|
|
|
c.next = nil
|
|
|
|
return info
|
2014-11-13 20:31:48 +01:00
|
|
|
}
|
|
|
|
|
rlp/rlpgen: RLP encoder code generator (#24251)
This change adds a code generator tool for creating EncodeRLP method
implementations. The generated methods will behave identically to the
reflect-based encoder, but run faster because there is no reflection overhead.
Package rlp now provides the EncoderBuffer type for incremental encoding. This
is used by generated code, but the new methods can also be useful for
hand-written encoders.
There is also experimental support for generating DecodeRLP, and some new
methods have been added to the existing Stream type to support this. Creating
decoders with rlpgen is not recommended at this time because the generated
methods create very poor error reporting.
More detail about package rlp changes:
* rlp: externalize struct field processing / validation
This adds a new package, rlp/internal/rlpstruct, in preparation for the
RLP encoder generator.
I think the struct field rules are subtle enough to warrant extracting
this into their own package, even though it means that a bunch of
adapter code is needed for converting to/from rlpstruct.Type.
* rlp: add more decoder methods (for rlpgen)
This adds new methods on rlp.Stream:
- Uint64, Uint32, Uint16, Uint8, BigInt
- ReadBytes for decoding into []byte
- MoreDataInList - useful for optional list elements
* rlp: expose encoder buffer (for rlpgen)
This exposes the internal encoder buffer type for use in EncodeRLP
implementations.
The new EncoderBuffer type is a sort-of 'opaque handle' for a pointer to
encBuffer. It is implemented this way to ensure the global encBuffer pool
is handled correctly.
2022-02-16 18:14:12 +01:00
|
|
|
func (c *typeCache) infoWhileGenerating(typ reflect.Type, tags rlpstruct.Tags) *typeinfo {
|
2015-04-17 01:16:46 +02:00
|
|
|
key := typekey{typ, tags}
|
2021-05-22 13:34:29 +02:00
|
|
|
if info := c.next[key]; info != nil {
|
2019-05-14 15:09:56 +02:00
|
|
|
return info
|
2014-11-13 20:31:48 +01:00
|
|
|
}
|
2021-05-22 13:34:29 +02:00
|
|
|
// Put a dummy value into the cache before generating.
|
|
|
|
// If the generator tries to lookup itself, it will get
|
2014-11-13 20:31:48 +01:00
|
|
|
// the dummy value and won't call itself recursively.
|
2021-05-22 13:34:29 +02:00
|
|
|
info := new(typeinfo)
|
|
|
|
c.next[key] = info
|
2019-05-14 15:09:56 +02:00
|
|
|
info.generate(typ, tags)
|
|
|
|
return info
|
2015-04-17 01:16:46 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
type field struct {
|
2021-05-07 14:37:13 +02:00
|
|
|
index int
|
|
|
|
info *typeinfo
|
|
|
|
optional bool
|
2014-11-13 20:31:48 +01:00
|
|
|
}
|
|
|
|
|
2021-05-07 14:37:13 +02:00
|
|
|
// structFields resolves the typeinfo of all public fields in a struct type.
|
2014-12-30 11:40:32 +01:00
|
|
|
func structFields(typ reflect.Type) (fields []field, err error) {
|
rlp/rlpgen: RLP encoder code generator (#24251)
This change adds a code generator tool for creating EncodeRLP method
implementations. The generated methods will behave identically to the
reflect-based encoder, but run faster because there is no reflection overhead.
Package rlp now provides the EncoderBuffer type for incremental encoding. This
is used by generated code, but the new methods can also be useful for
hand-written encoders.
There is also experimental support for generating DecodeRLP, and some new
methods have been added to the existing Stream type to support this. Creating
decoders with rlpgen is not recommended at this time because the generated
methods create very poor error reporting.
More detail about package rlp changes:
* rlp: externalize struct field processing / validation
This adds a new package, rlp/internal/rlpstruct, in preparation for the
RLP encoder generator.
I think the struct field rules are subtle enough to warrant extracting
this into their own package, even though it means that a bunch of
adapter code is needed for converting to/from rlpstruct.Type.
* rlp: add more decoder methods (for rlpgen)
This adds new methods on rlp.Stream:
- Uint64, Uint32, Uint16, Uint8, BigInt
- ReadBytes for decoding into []byte
- MoreDataInList - useful for optional list elements
* rlp: expose encoder buffer (for rlpgen)
This exposes the internal encoder buffer type for use in EncodeRLP
implementations.
The new EncoderBuffer type is a sort-of 'opaque handle' for a pointer to
encBuffer. It is implemented this way to ensure the global encBuffer pool
is handled correctly.
2022-02-16 18:14:12 +01:00
|
|
|
// Convert fields to rlpstruct.Field.
|
|
|
|
var allStructFields []rlpstruct.Field
|
2014-12-30 11:40:32 +01:00
|
|
|
for i := 0; i < typ.NumField(); i++ {
|
rlp/rlpgen: RLP encoder code generator (#24251)
This change adds a code generator tool for creating EncodeRLP method
implementations. The generated methods will behave identically to the
reflect-based encoder, but run faster because there is no reflection overhead.
Package rlp now provides the EncoderBuffer type for incremental encoding. This
is used by generated code, but the new methods can also be useful for
hand-written encoders.
There is also experimental support for generating DecodeRLP, and some new
methods have been added to the existing Stream type to support this. Creating
decoders with rlpgen is not recommended at this time because the generated
methods create very poor error reporting.
More detail about package rlp changes:
* rlp: externalize struct field processing / validation
This adds a new package, rlp/internal/rlpstruct, in preparation for the
RLP encoder generator.
I think the struct field rules are subtle enough to warrant extracting
this into their own package, even though it means that a bunch of
adapter code is needed for converting to/from rlpstruct.Type.
* rlp: add more decoder methods (for rlpgen)
This adds new methods on rlp.Stream:
- Uint64, Uint32, Uint16, Uint8, BigInt
- ReadBytes for decoding into []byte
- MoreDataInList - useful for optional list elements
* rlp: expose encoder buffer (for rlpgen)
This exposes the internal encoder buffer type for use in EncodeRLP
implementations.
The new EncoderBuffer type is a sort-of 'opaque handle' for a pointer to
encBuffer. It is implemented this way to ensure the global encBuffer pool
is handled correctly.
2022-02-16 18:14:12 +01:00
|
|
|
rf := typ.Field(i)
|
|
|
|
allStructFields = append(allStructFields, rlpstruct.Field{
|
|
|
|
Name: rf.Name,
|
|
|
|
Index: i,
|
|
|
|
Exported: rf.PkgPath == "",
|
|
|
|
Tag: string(rf.Tag),
|
|
|
|
Type: *rtypeToStructType(rf.Type, nil),
|
|
|
|
})
|
|
|
|
}
|
|
|
|
|
|
|
|
// Filter/validate fields.
|
|
|
|
structFields, structTags, err := rlpstruct.ProcessFields(allStructFields)
|
|
|
|
if err != nil {
|
|
|
|
if tagErr, ok := err.(rlpstruct.TagError); ok {
|
|
|
|
tagErr.StructType = typ.String()
|
|
|
|
return nil, tagErr
|
2014-12-30 11:40:32 +01:00
|
|
|
}
|
rlp/rlpgen: RLP encoder code generator (#24251)
This change adds a code generator tool for creating EncodeRLP method
implementations. The generated methods will behave identically to the
reflect-based encoder, but run faster because there is no reflection overhead.
Package rlp now provides the EncoderBuffer type for incremental encoding. This
is used by generated code, but the new methods can also be useful for
hand-written encoders.
There is also experimental support for generating DecodeRLP, and some new
methods have been added to the existing Stream type to support this. Creating
decoders with rlpgen is not recommended at this time because the generated
methods create very poor error reporting.
More detail about package rlp changes:
* rlp: externalize struct field processing / validation
This adds a new package, rlp/internal/rlpstruct, in preparation for the
RLP encoder generator.
I think the struct field rules are subtle enough to warrant extracting
this into their own package, even though it means that a bunch of
adapter code is needed for converting to/from rlpstruct.Type.
* rlp: add more decoder methods (for rlpgen)
This adds new methods on rlp.Stream:
- Uint64, Uint32, Uint16, Uint8, BigInt
- ReadBytes for decoding into []byte
- MoreDataInList - useful for optional list elements
* rlp: expose encoder buffer (for rlpgen)
This exposes the internal encoder buffer type for use in EncodeRLP
implementations.
The new EncoderBuffer type is a sort-of 'opaque handle' for a pointer to
encBuffer. It is implemented this way to ensure the global encBuffer pool
is handled correctly.
2022-02-16 18:14:12 +01:00
|
|
|
return nil, err
|
|
|
|
}
|
|
|
|
|
|
|
|
// Resolve typeinfo.
|
|
|
|
for i, sf := range structFields {
|
|
|
|
typ := typ.Field(sf.Index).Type
|
|
|
|
tags := structTags[i]
|
|
|
|
info := theTC.infoWhileGenerating(typ, tags)
|
|
|
|
fields = append(fields, field{sf.Index, info, tags.Optional})
|
2014-12-30 11:40:32 +01:00
|
|
|
}
|
|
|
|
return fields, nil
|
|
|
|
}
|
|
|
|
|
rlp/rlpgen: RLP encoder code generator (#24251)
This change adds a code generator tool for creating EncodeRLP method
implementations. The generated methods will behave identically to the
reflect-based encoder, but run faster because there is no reflection overhead.
Package rlp now provides the EncoderBuffer type for incremental encoding. This
is used by generated code, but the new methods can also be useful for
hand-written encoders.
There is also experimental support for generating DecodeRLP, and some new
methods have been added to the existing Stream type to support this. Creating
decoders with rlpgen is not recommended at this time because the generated
methods create very poor error reporting.
More detail about package rlp changes:
* rlp: externalize struct field processing / validation
This adds a new package, rlp/internal/rlpstruct, in preparation for the
RLP encoder generator.
I think the struct field rules are subtle enough to warrant extracting
this into their own package, even though it means that a bunch of
adapter code is needed for converting to/from rlpstruct.Type.
* rlp: add more decoder methods (for rlpgen)
This adds new methods on rlp.Stream:
- Uint64, Uint32, Uint16, Uint8, BigInt
- ReadBytes for decoding into []byte
- MoreDataInList - useful for optional list elements
* rlp: expose encoder buffer (for rlpgen)
This exposes the internal encoder buffer type for use in EncodeRLP
implementations.
The new EncoderBuffer type is a sort-of 'opaque handle' for a pointer to
encBuffer. It is implemented this way to ensure the global encBuffer pool
is handled correctly.
2022-02-16 18:14:12 +01:00
|
|
|
// firstOptionalField returns the index of the first field with "optional" tag.
|
2021-05-07 14:37:13 +02:00
|
|
|
func firstOptionalField(fields []field) int {
|
|
|
|
for i, f := range fields {
|
|
|
|
if f.optional {
|
|
|
|
return i
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return len(fields)
|
|
|
|
}
|
|
|
|
|
rlp: improve nil pointer handling (#20064)
* rlp: improve nil pointer handling
In both encoder and decoder, the rules for encoding nil pointers were a
bit hard to understand, and didn't leave much choice. Since RLP allows
two empty values (empty list, empty string), any protocol built on RLP
must choose either of these values to represent the null value in a
certain context.
This change adds choice in the form of two new struct tags, "nilString"
and "nilList". These can be used to specify how a nil pointer value is
encoded. The "nil" tag still exists, but its implementation is now
explicit and defines exactly how nil pointers are handled in a single
place.
Another important change in this commit is how nil pointers and the
Encoder interface interact. The EncodeRLP method was previously called
even on nil values, which was supposed to give users a choice of how
their value would be handled when nil. It turns out this is a stupid
idea. If you create a network protocol containing an object defined in
another package, it's better to be able to say that the object should be
a list or string when nil in the definition of the protocol message
rather than defining the encoding of nil on the object itself.
As of this commit, the encoding rules for pointers now take precedence
over the Encoder interface rule. I think the "nil" tag will work fine
for most cases. For special kinds of objects which are a struct in Go
but strings in RLP, code using the object can specify the desired
encoding of nil using the "nilString" and "nilList" tags.
* rlp: propagate struct field type errors
If a struct contained fields of undecodable type, the encoder and
decoder would panic instead of returning an error. Fix this by
propagating type errors in makeStruct{Writer,Decoder} and add a test.
2019-09-13 11:10:57 +02:00
|
|
|
type structFieldError struct {
|
|
|
|
typ reflect.Type
|
|
|
|
field int
|
|
|
|
err error
|
|
|
|
}
|
|
|
|
|
|
|
|
func (e structFieldError) Error() string {
|
|
|
|
return fmt.Sprintf("%v (struct field %v.%s)", e.err, e.typ, e.typ.Field(e.field).Name)
|
|
|
|
}
|
|
|
|
|
rlp/rlpgen: RLP encoder code generator (#24251)
This change adds a code generator tool for creating EncodeRLP method
implementations. The generated methods will behave identically to the
reflect-based encoder, but run faster because there is no reflection overhead.
Package rlp now provides the EncoderBuffer type for incremental encoding. This
is used by generated code, but the new methods can also be useful for
hand-written encoders.
There is also experimental support for generating DecodeRLP, and some new
methods have been added to the existing Stream type to support this. Creating
decoders with rlpgen is not recommended at this time because the generated
methods create very poor error reporting.
More detail about package rlp changes:
* rlp: externalize struct field processing / validation
This adds a new package, rlp/internal/rlpstruct, in preparation for the
RLP encoder generator.
I think the struct field rules are subtle enough to warrant extracting
this into their own package, even though it means that a bunch of
adapter code is needed for converting to/from rlpstruct.Type.
* rlp: add more decoder methods (for rlpgen)
This adds new methods on rlp.Stream:
- Uint64, Uint32, Uint16, Uint8, BigInt
- ReadBytes for decoding into []byte
- MoreDataInList - useful for optional list elements
* rlp: expose encoder buffer (for rlpgen)
This exposes the internal encoder buffer type for use in EncodeRLP
implementations.
The new EncoderBuffer type is a sort-of 'opaque handle' for a pointer to
encBuffer. It is implemented this way to ensure the global encBuffer pool
is handled correctly.
2022-02-16 18:14:12 +01:00
|
|
|
func (i *typeinfo) generate(typ reflect.Type, tags rlpstruct.Tags) {
|
|
|
|
i.decoder, i.decoderErr = makeDecoder(typ, tags)
|
|
|
|
i.writer, i.writerErr = makeWriter(typ, tags)
|
rlp: improve nil pointer handling (#20064)
* rlp: improve nil pointer handling
In both encoder and decoder, the rules for encoding nil pointers were a
bit hard to understand, and didn't leave much choice. Since RLP allows
two empty values (empty list, empty string), any protocol built on RLP
must choose either of these values to represent the null value in a
certain context.
This change adds choice in the form of two new struct tags, "nilString"
and "nilList". These can be used to specify how a nil pointer value is
encoded. The "nil" tag still exists, but its implementation is now
explicit and defines exactly how nil pointers are handled in a single
place.
Another important change in this commit is how nil pointers and the
Encoder interface interact. The EncodeRLP method was previously called
even on nil values, which was supposed to give users a choice of how
their value would be handled when nil. It turns out this is a stupid
idea. If you create a network protocol containing an object defined in
another package, it's better to be able to say that the object should be
a list or string when nil in the definition of the protocol message
rather than defining the encoding of nil on the object itself.
As of this commit, the encoding rules for pointers now take precedence
over the Encoder interface rule. I think the "nil" tag will work fine
for most cases. For special kinds of objects which are a struct in Go
but strings in RLP, code using the object can specify the desired
encoding of nil using the "nilString" and "nilList" tags.
* rlp: propagate struct field type errors
If a struct contained fields of undecodable type, the encoder and
decoder would panic instead of returning an error. Fix this by
propagating type errors in makeStruct{Writer,Decoder} and add a test.
2019-09-13 11:10:57 +02:00
|
|
|
}
|
|
|
|
|
rlp/rlpgen: RLP encoder code generator (#24251)
This change adds a code generator tool for creating EncodeRLP method
implementations. The generated methods will behave identically to the
reflect-based encoder, but run faster because there is no reflection overhead.
Package rlp now provides the EncoderBuffer type for incremental encoding. This
is used by generated code, but the new methods can also be useful for
hand-written encoders.
There is also experimental support for generating DecodeRLP, and some new
methods have been added to the existing Stream type to support this. Creating
decoders with rlpgen is not recommended at this time because the generated
methods create very poor error reporting.
More detail about package rlp changes:
* rlp: externalize struct field processing / validation
This adds a new package, rlp/internal/rlpstruct, in preparation for the
RLP encoder generator.
I think the struct field rules are subtle enough to warrant extracting
this into their own package, even though it means that a bunch of
adapter code is needed for converting to/from rlpstruct.Type.
* rlp: add more decoder methods (for rlpgen)
This adds new methods on rlp.Stream:
- Uint64, Uint32, Uint16, Uint8, BigInt
- ReadBytes for decoding into []byte
- MoreDataInList - useful for optional list elements
* rlp: expose encoder buffer (for rlpgen)
This exposes the internal encoder buffer type for use in EncodeRLP
implementations.
The new EncoderBuffer type is a sort-of 'opaque handle' for a pointer to
encBuffer. It is implemented this way to ensure the global encBuffer pool
is handled correctly.
2022-02-16 18:14:12 +01:00
|
|
|
// rtypeToStructType converts typ to rlpstruct.Type.
|
|
|
|
func rtypeToStructType(typ reflect.Type, rec map[reflect.Type]*rlpstruct.Type) *rlpstruct.Type {
|
|
|
|
k := typ.Kind()
|
|
|
|
if k == reflect.Invalid {
|
|
|
|
panic("invalid kind")
|
|
|
|
}
|
rlp: improve nil pointer handling (#20064)
* rlp: improve nil pointer handling
In both encoder and decoder, the rules for encoding nil pointers were a
bit hard to understand, and didn't leave much choice. Since RLP allows
two empty values (empty list, empty string), any protocol built on RLP
must choose either of these values to represent the null value in a
certain context.
This change adds choice in the form of two new struct tags, "nilString"
and "nilList". These can be used to specify how a nil pointer value is
encoded. The "nil" tag still exists, but its implementation is now
explicit and defines exactly how nil pointers are handled in a single
place.
Another important change in this commit is how nil pointers and the
Encoder interface interact. The EncodeRLP method was previously called
even on nil values, which was supposed to give users a choice of how
their value would be handled when nil. It turns out this is a stupid
idea. If you create a network protocol containing an object defined in
another package, it's better to be able to say that the object should be
a list or string when nil in the definition of the protocol message
rather than defining the encoding of nil on the object itself.
As of this commit, the encoding rules for pointers now take precedence
over the Encoder interface rule. I think the "nil" tag will work fine
for most cases. For special kinds of objects which are a struct in Go
but strings in RLP, code using the object can specify the desired
encoding of nil using the "nilString" and "nilList" tags.
* rlp: propagate struct field type errors
If a struct contained fields of undecodable type, the encoder and
decoder would panic instead of returning an error. Fix this by
propagating type errors in makeStruct{Writer,Decoder} and add a test.
2019-09-13 11:10:57 +02:00
|
|
|
|
rlp/rlpgen: RLP encoder code generator (#24251)
This change adds a code generator tool for creating EncodeRLP method
implementations. The generated methods will behave identically to the
reflect-based encoder, but run faster because there is no reflection overhead.
Package rlp now provides the EncoderBuffer type for incremental encoding. This
is used by generated code, but the new methods can also be useful for
hand-written encoders.
There is also experimental support for generating DecodeRLP, and some new
methods have been added to the existing Stream type to support this. Creating
decoders with rlpgen is not recommended at this time because the generated
methods create very poor error reporting.
More detail about package rlp changes:
* rlp: externalize struct field processing / validation
This adds a new package, rlp/internal/rlpstruct, in preparation for the
RLP encoder generator.
I think the struct field rules are subtle enough to warrant extracting
this into their own package, even though it means that a bunch of
adapter code is needed for converting to/from rlpstruct.Type.
* rlp: add more decoder methods (for rlpgen)
This adds new methods on rlp.Stream:
- Uint64, Uint32, Uint16, Uint8, BigInt
- ReadBytes for decoding into []byte
- MoreDataInList - useful for optional list elements
* rlp: expose encoder buffer (for rlpgen)
This exposes the internal encoder buffer type for use in EncodeRLP
implementations.
The new EncoderBuffer type is a sort-of 'opaque handle' for a pointer to
encBuffer. It is implemented this way to ensure the global encBuffer pool
is handled correctly.
2022-02-16 18:14:12 +01:00
|
|
|
if prev := rec[typ]; prev != nil {
|
|
|
|
return prev // short-circuit for recursive types
|
|
|
|
}
|
|
|
|
if rec == nil {
|
|
|
|
rec = make(map[reflect.Type]*rlpstruct.Type)
|
2015-12-21 21:05:20 +01:00
|
|
|
}
|
2015-04-17 01:16:46 +02:00
|
|
|
|
rlp/rlpgen: RLP encoder code generator (#24251)
This change adds a code generator tool for creating EncodeRLP method
implementations. The generated methods will behave identically to the
reflect-based encoder, but run faster because there is no reflection overhead.
Package rlp now provides the EncoderBuffer type for incremental encoding. This
is used by generated code, but the new methods can also be useful for
hand-written encoders.
There is also experimental support for generating DecodeRLP, and some new
methods have been added to the existing Stream type to support this. Creating
decoders with rlpgen is not recommended at this time because the generated
methods create very poor error reporting.
More detail about package rlp changes:
* rlp: externalize struct field processing / validation
This adds a new package, rlp/internal/rlpstruct, in preparation for the
RLP encoder generator.
I think the struct field rules are subtle enough to warrant extracting
this into their own package, even though it means that a bunch of
adapter code is needed for converting to/from rlpstruct.Type.
* rlp: add more decoder methods (for rlpgen)
This adds new methods on rlp.Stream:
- Uint64, Uint32, Uint16, Uint8, BigInt
- ReadBytes for decoding into []byte
- MoreDataInList - useful for optional list elements
* rlp: expose encoder buffer (for rlpgen)
This exposes the internal encoder buffer type for use in EncodeRLP
implementations.
The new EncoderBuffer type is a sort-of 'opaque handle' for a pointer to
encBuffer. It is implemented this way to ensure the global encBuffer pool
is handled correctly.
2022-02-16 18:14:12 +01:00
|
|
|
t := &rlpstruct.Type{
|
|
|
|
Name: typ.String(),
|
|
|
|
Kind: k,
|
|
|
|
IsEncoder: typ.Implements(encoderInterface),
|
|
|
|
IsDecoder: typ.Implements(decoderInterface),
|
|
|
|
}
|
|
|
|
rec[typ] = t
|
|
|
|
if k == reflect.Array || k == reflect.Slice || k == reflect.Ptr {
|
|
|
|
t.Elem = rtypeToStructType(typ.Elem(), rec)
|
2014-12-30 11:40:32 +01:00
|
|
|
}
|
rlp/rlpgen: RLP encoder code generator (#24251)
This change adds a code generator tool for creating EncodeRLP method
implementations. The generated methods will behave identically to the
reflect-based encoder, but run faster because there is no reflection overhead.
Package rlp now provides the EncoderBuffer type for incremental encoding. This
is used by generated code, but the new methods can also be useful for
hand-written encoders.
There is also experimental support for generating DecodeRLP, and some new
methods have been added to the existing Stream type to support this. Creating
decoders with rlpgen is not recommended at this time because the generated
methods create very poor error reporting.
More detail about package rlp changes:
* rlp: externalize struct field processing / validation
This adds a new package, rlp/internal/rlpstruct, in preparation for the
RLP encoder generator.
I think the struct field rules are subtle enough to warrant extracting
this into their own package, even though it means that a bunch of
adapter code is needed for converting to/from rlpstruct.Type.
* rlp: add more decoder methods (for rlpgen)
This adds new methods on rlp.Stream:
- Uint64, Uint32, Uint16, Uint8, BigInt
- ReadBytes for decoding into []byte
- MoreDataInList - useful for optional list elements
* rlp: expose encoder buffer (for rlpgen)
This exposes the internal encoder buffer type for use in EncodeRLP
implementations.
The new EncoderBuffer type is a sort-of 'opaque handle' for a pointer to
encBuffer. It is implemented this way to ensure the global encBuffer pool
is handled correctly.
2022-02-16 18:14:12 +01:00
|
|
|
return t
|
2019-05-14 15:09:56 +02:00
|
|
|
}
|
|
|
|
|
rlp/rlpgen: RLP encoder code generator (#24251)
This change adds a code generator tool for creating EncodeRLP method
implementations. The generated methods will behave identically to the
reflect-based encoder, but run faster because there is no reflection overhead.
Package rlp now provides the EncoderBuffer type for incremental encoding. This
is used by generated code, but the new methods can also be useful for
hand-written encoders.
There is also experimental support for generating DecodeRLP, and some new
methods have been added to the existing Stream type to support this. Creating
decoders with rlpgen is not recommended at this time because the generated
methods create very poor error reporting.
More detail about package rlp changes:
* rlp: externalize struct field processing / validation
This adds a new package, rlp/internal/rlpstruct, in preparation for the
RLP encoder generator.
I think the struct field rules are subtle enough to warrant extracting
this into their own package, even though it means that a bunch of
adapter code is needed for converting to/from rlpstruct.Type.
* rlp: add more decoder methods (for rlpgen)
This adds new methods on rlp.Stream:
- Uint64, Uint32, Uint16, Uint8, BigInt
- ReadBytes for decoding into []byte
- MoreDataInList - useful for optional list elements
* rlp: expose encoder buffer (for rlpgen)
This exposes the internal encoder buffer type for use in EncodeRLP
implementations.
The new EncoderBuffer type is a sort-of 'opaque handle' for a pointer to
encBuffer. It is implemented this way to ensure the global encBuffer pool
is handled correctly.
2022-02-16 18:14:12 +01:00
|
|
|
// typeNilKind gives the RLP value kind for nil pointers to 'typ'.
|
|
|
|
func typeNilKind(typ reflect.Type, tags rlpstruct.Tags) Kind {
|
|
|
|
styp := rtypeToStructType(typ, nil)
|
2014-11-13 20:31:48 +01:00
|
|
|
|
rlp/rlpgen: RLP encoder code generator (#24251)
This change adds a code generator tool for creating EncodeRLP method
implementations. The generated methods will behave identically to the
reflect-based encoder, but run faster because there is no reflection overhead.
Package rlp now provides the EncoderBuffer type for incremental encoding. This
is used by generated code, but the new methods can also be useful for
hand-written encoders.
There is also experimental support for generating DecodeRLP, and some new
methods have been added to the existing Stream type to support this. Creating
decoders with rlpgen is not recommended at this time because the generated
methods create very poor error reporting.
More detail about package rlp changes:
* rlp: externalize struct field processing / validation
This adds a new package, rlp/internal/rlpstruct, in preparation for the
RLP encoder generator.
I think the struct field rules are subtle enough to warrant extracting
this into their own package, even though it means that a bunch of
adapter code is needed for converting to/from rlpstruct.Type.
* rlp: add more decoder methods (for rlpgen)
This adds new methods on rlp.Stream:
- Uint64, Uint32, Uint16, Uint8, BigInt
- ReadBytes for decoding into []byte
- MoreDataInList - useful for optional list elements
* rlp: expose encoder buffer (for rlpgen)
This exposes the internal encoder buffer type for use in EncodeRLP
implementations.
The new EncoderBuffer type is a sort-of 'opaque handle' for a pointer to
encBuffer. It is implemented this way to ensure the global encBuffer pool
is handled correctly.
2022-02-16 18:14:12 +01:00
|
|
|
var nk rlpstruct.NilKind
|
|
|
|
if tags.NilOK {
|
|
|
|
nk = tags.NilKind
|
|
|
|
} else {
|
|
|
|
nk = styp.DefaultNilValue()
|
|
|
|
}
|
|
|
|
switch nk {
|
|
|
|
case rlpstruct.NilKindString:
|
rlp: improve nil pointer handling (#20064)
* rlp: improve nil pointer handling
In both encoder and decoder, the rules for encoding nil pointers were a
bit hard to understand, and didn't leave much choice. Since RLP allows
two empty values (empty list, empty string), any protocol built on RLP
must choose either of these values to represent the null value in a
certain context.
This change adds choice in the form of two new struct tags, "nilString"
and "nilList". These can be used to specify how a nil pointer value is
encoded. The "nil" tag still exists, but its implementation is now
explicit and defines exactly how nil pointers are handled in a single
place.
Another important change in this commit is how nil pointers and the
Encoder interface interact. The EncodeRLP method was previously called
even on nil values, which was supposed to give users a choice of how
their value would be handled when nil. It turns out this is a stupid
idea. If you create a network protocol containing an object defined in
another package, it's better to be able to say that the object should be
a list or string when nil in the definition of the protocol message
rather than defining the encoding of nil on the object itself.
As of this commit, the encoding rules for pointers now take precedence
over the Encoder interface rule. I think the "nil" tag will work fine
for most cases. For special kinds of objects which are a struct in Go
but strings in RLP, code using the object can specify the desired
encoding of nil using the "nilString" and "nilList" tags.
* rlp: propagate struct field type errors
If a struct contained fields of undecodable type, the encoder and
decoder would panic instead of returning an error. Fix this by
propagating type errors in makeStruct{Writer,Decoder} and add a test.
2019-09-13 11:10:57 +02:00
|
|
|
return String
|
rlp/rlpgen: RLP encoder code generator (#24251)
This change adds a code generator tool for creating EncodeRLP method
implementations. The generated methods will behave identically to the
reflect-based encoder, but run faster because there is no reflection overhead.
Package rlp now provides the EncoderBuffer type for incremental encoding. This
is used by generated code, but the new methods can also be useful for
hand-written encoders.
There is also experimental support for generating DecodeRLP, and some new
methods have been added to the existing Stream type to support this. Creating
decoders with rlpgen is not recommended at this time because the generated
methods create very poor error reporting.
More detail about package rlp changes:
* rlp: externalize struct field processing / validation
This adds a new package, rlp/internal/rlpstruct, in preparation for the
RLP encoder generator.
I think the struct field rules are subtle enough to warrant extracting
this into their own package, even though it means that a bunch of
adapter code is needed for converting to/from rlpstruct.Type.
* rlp: add more decoder methods (for rlpgen)
This adds new methods on rlp.Stream:
- Uint64, Uint32, Uint16, Uint8, BigInt
- ReadBytes for decoding into []byte
- MoreDataInList - useful for optional list elements
* rlp: expose encoder buffer (for rlpgen)
This exposes the internal encoder buffer type for use in EncodeRLP
implementations.
The new EncoderBuffer type is a sort-of 'opaque handle' for a pointer to
encBuffer. It is implemented this way to ensure the global encBuffer pool
is handled correctly.
2022-02-16 18:14:12 +01:00
|
|
|
case rlpstruct.NilKindList:
|
|
|
|
return List
|
|
|
|
default:
|
|
|
|
panic("invalid nil kind value")
|
rlp: improve nil pointer handling (#20064)
* rlp: improve nil pointer handling
In both encoder and decoder, the rules for encoding nil pointers were a
bit hard to understand, and didn't leave much choice. Since RLP allows
two empty values (empty list, empty string), any protocol built on RLP
must choose either of these values to represent the null value in a
certain context.
This change adds choice in the form of two new struct tags, "nilString"
and "nilList". These can be used to specify how a nil pointer value is
encoded. The "nil" tag still exists, but its implementation is now
explicit and defines exactly how nil pointers are handled in a single
place.
Another important change in this commit is how nil pointers and the
Encoder interface interact. The EncodeRLP method was previously called
even on nil values, which was supposed to give users a choice of how
their value would be handled when nil. It turns out this is a stupid
idea. If you create a network protocol containing an object defined in
another package, it's better to be able to say that the object should be
a list or string when nil in the definition of the protocol message
rather than defining the encoding of nil on the object itself.
As of this commit, the encoding rules for pointers now take precedence
over the Encoder interface rule. I think the "nil" tag will work fine
for most cases. For special kinds of objects which are a struct in Go
but strings in RLP, code using the object can specify the desired
encoding of nil using the "nilString" and "nilList" tags.
* rlp: propagate struct field type errors
If a struct contained fields of undecodable type, the encoder and
decoder would panic instead of returning an error. Fix this by
propagating type errors in makeStruct{Writer,Decoder} and add a test.
2019-09-13 11:10:57 +02:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2014-12-09 10:41:47 +01:00
|
|
|
func isUint(k reflect.Kind) bool {
|
|
|
|
return k >= reflect.Uint && k <= reflect.Uintptr
|
2014-11-13 20:31:48 +01:00
|
|
|
}
|
rlp: improve nil pointer handling (#20064)
* rlp: improve nil pointer handling
In both encoder and decoder, the rules for encoding nil pointers were a
bit hard to understand, and didn't leave much choice. Since RLP allows
two empty values (empty list, empty string), any protocol built on RLP
must choose either of these values to represent the null value in a
certain context.
This change adds choice in the form of two new struct tags, "nilString"
and "nilList". These can be used to specify how a nil pointer value is
encoded. The "nil" tag still exists, but its implementation is now
explicit and defines exactly how nil pointers are handled in a single
place.
Another important change in this commit is how nil pointers and the
Encoder interface interact. The EncodeRLP method was previously called
even on nil values, which was supposed to give users a choice of how
their value would be handled when nil. It turns out this is a stupid
idea. If you create a network protocol containing an object defined in
another package, it's better to be able to say that the object should be
a list or string when nil in the definition of the protocol message
rather than defining the encoding of nil on the object itself.
As of this commit, the encoding rules for pointers now take precedence
over the Encoder interface rule. I think the "nil" tag will work fine
for most cases. For special kinds of objects which are a struct in Go
but strings in RLP, code using the object can specify the desired
encoding of nil using the "nilString" and "nilList" tags.
* rlp: propagate struct field type errors
If a struct contained fields of undecodable type, the encoder and
decoder would panic instead of returning an error. Fix this by
propagating type errors in makeStruct{Writer,Decoder} and add a test.
2019-09-13 11:10:57 +02:00
|
|
|
|
2020-07-06 11:17:09 +02:00
|
|
|
func isByte(typ reflect.Type) bool {
|
|
|
|
return typ.Kind() == reflect.Uint8 && !typ.Implements(encoderInterface)
|
|
|
|
}
|