bsc/les/peer.go

921 lines
27 KiB
Go
Raw Normal View History

2016-11-09 04:01:56 +03:00
// Copyright 2016 The go-ethereum Authors
2016-10-14 06:51:29 +03:00
// This file is part of the go-ethereum library.
//
// The go-ethereum library is free software: you can redistribute it and/or modify
// it under the terms of the GNU Lesser General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// The go-ethereum library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU Lesser General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public License
// along with the go-ethereum library. If not, see <http://www.gnu.org/licenses/>.
package les
import (
"errors"
"fmt"
"math/big"
"math/rand"
"net"
2016-10-14 06:51:29 +03:00
"sync"
"sync/atomic"
"time"
2016-10-14 06:51:29 +03:00
"github.com/ethereum/go-ethereum/common"
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 14:32:48 +03:00
"github.com/ethereum/go-ethereum/common/mclock"
"github.com/ethereum/go-ethereum/core"
2016-10-14 06:51:29 +03:00
"github.com/ethereum/go-ethereum/core/types"
"github.com/ethereum/go-ethereum/eth"
"github.com/ethereum/go-ethereum/les/flowcontrol"
"github.com/ethereum/go-ethereum/light"
2016-10-14 06:51:29 +03:00
"github.com/ethereum/go-ethereum/p2p"
"github.com/ethereum/go-ethereum/p2p/enode"
"github.com/ethereum/go-ethereum/params"
2016-10-14 06:51:29 +03:00
"github.com/ethereum/go-ethereum/rlp"
)
var (
2019-04-05 18:01:51 +03:00
errClosed = errors.New("peer set is closed")
errAlreadyRegistered = errors.New("peer is already registered")
errNotRegistered = errors.New("peer is not registered")
2016-10-14 06:51:29 +03:00
)
const (
maxRequestErrors = 20 // number of invalid requests tolerated (makes the protocol less brittle but still avoids spam)
maxResponseErrors = 50 // number of invalid responses tolerated (makes the protocol less brittle but still avoids spam)
)
2016-10-14 06:51:29 +03:00
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 14:32:48 +03:00
// capacity limitation for parameter updates
const (
allowedUpdateBytes = 100000 // initial/maximum allowed update size
allowedUpdateRate = time.Millisecond * 10 // time constant for recharging one byte of allowance
)
const (
freezeTimeBase = time.Millisecond * 700 // fixed component of client freeze time
freezeTimeRandom = time.Millisecond * 600 // random component of client freeze time
freezeCheckPeriod = time.Millisecond * 100 // buffer value recheck period after initial freeze time has elapsed
)
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 14:32:48 +03:00
// if the total encoded size of a sent transaction batch is over txSizeCostLimit
// per transaction then the request cost is calculated as proportional to the
// encoded size instead of the transaction count
const txSizeCostLimit = 0x4000
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 14:32:48 +03:00
const (
announceTypeNone = iota
announceTypeSimple
announceTypeSigned
)
2016-10-14 06:51:29 +03:00
type peer struct {
*p2p.Peer
rw p2p.MsgReadWriter
version int // Protocol version negotiated
network uint64 // Network ID being on
2016-10-14 06:51:29 +03:00
announceType uint64
// Checkpoint relative fields
checkpoint params.TrustedCheckpoint
checkpointNumber uint64
2016-10-14 06:51:29 +03:00
id string
headInfo *announceData
lock sync.RWMutex
2016-10-14 06:51:29 +03:00
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 14:32:48 +03:00
sendQueue *execQueue
errCh chan error
// responseLock ensures that responses are queued in the same order as
// RequestProcessed is called
responseLock sync.Mutex
responseCount uint64
invalidCount uint32
2016-10-14 06:51:29 +03:00
poolEntry *poolEntry
hasBlock func(common.Hash, uint64, bool) bool
responseErrors int
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 14:32:48 +03:00
updateCounter uint64
updateTime mclock.AbsTime
frozen uint32 // 1 if client is in frozen state
2016-11-17 17:54:24 +03:00
fcClient *flowcontrol.ClientNode // nil if the peer is server only
fcServer *flowcontrol.ServerNode // nil if the peer is client only
fcParams flowcontrol.ServerParams
fcCosts requestCostTable
balanceTracker *balanceTracker // set by clientPool.connect, used and removed by serverHandler.
trusted bool
onlyAnnounce bool
chainSince, chainRecent uint64
stateSince, stateRecent uint64
2016-10-14 06:51:29 +03:00
}
func newPeer(version int, network uint64, trusted bool, p *p2p.Peer, rw p2p.MsgReadWriter) *peer {
2016-10-14 06:51:29 +03:00
return &peer{
Peer: p,
rw: rw,
version: version,
network: network,
id: peerIdToString(p.ID()),
trusted: trusted,
errCh: make(chan error, 1),
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 14:32:48 +03:00
}
}
// peerIdToString converts enode.ID to a string form
func peerIdToString(id enode.ID) string {
return fmt.Sprintf("%x", id.Bytes())
}
// freeClientId returns a string identifier for the peer. Multiple peers with the
// same identifier can not be connected in free mode simultaneously.
func (p *peer) freeClientId() string {
if addr, ok := p.RemoteAddr().(*net.TCPAddr); ok {
if addr.IP.IsLoopback() {
// using peer id instead of loopback ip address allows multiple free
// connections from local machine to own server
return p.id
} else {
return addr.IP.String()
}
}
return p.id
}
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 14:32:48 +03:00
// rejectUpdate returns true if a parameter update has to be rejected because
// the size and/or rate of updates exceed the capacity limitation
func (p *peer) rejectUpdate(size uint64) bool {
now := mclock.Now()
if p.updateCounter == 0 {
p.updateTime = now
} else {
dt := now - p.updateTime
r := uint64(dt / mclock.AbsTime(allowedUpdateRate))
if p.updateCounter > r {
p.updateCounter -= r
p.updateTime += mclock.AbsTime(allowedUpdateRate * time.Duration(r))
} else {
p.updateCounter = 0
p.updateTime = now
}
2016-10-14 06:51:29 +03:00
}
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 14:32:48 +03:00
p.updateCounter += size
return p.updateCounter > allowedUpdateBytes
2016-10-14 06:51:29 +03:00
}
// freezeClient temporarily puts the client in a frozen state which means all
// unprocessed and subsequent requests are dropped. Unfreezing happens automatically
// after a short time if the client's buffer value is at least in the slightly positive
// region. The client is also notified about being frozen/unfrozen with a Stop/Resume
// message.
func (p *peer) freezeClient() {
if p.version < lpv3 {
// if Stop/Resume is not supported then just drop the peer after setting
// its frozen status permanently
atomic.StoreUint32(&p.frozen, 1)
p.Peer.Disconnect(p2p.DiscUselessPeer)
return
}
if atomic.SwapUint32(&p.frozen, 1) == 0 {
go func() {
p.SendStop()
time.Sleep(freezeTimeBase + time.Duration(rand.Int63n(int64(freezeTimeRandom))))
for {
bufValue, bufLimit := p.fcClient.BufferStatus()
if bufLimit == 0 {
return
}
if bufValue <= bufLimit/8 {
time.Sleep(freezeCheckPeriod)
} else {
atomic.StoreUint32(&p.frozen, 0)
p.SendResume(bufValue)
break
}
}
}()
}
}
// freezeServer processes Stop/Resume messages from the given server
func (p *peer) freezeServer(frozen bool) {
var f uint32
if frozen {
f = 1
}
if atomic.SwapUint32(&p.frozen, f) != f && frozen {
p.sendQueue.clear()
}
}
// isFrozen returns true if the client is frozen or the server has put our
// client in frozen state
func (p *peer) isFrozen() bool {
return atomic.LoadUint32(&p.frozen) != 0
}
func (p *peer) canQueue() bool {
return p.sendQueue.canQueue() && !p.isFrozen()
}
func (p *peer) queueSend(f func()) {
p.sendQueue.queue(f)
}
2016-10-14 06:51:29 +03:00
// Info gathers and returns a collection of metadata known about a peer.
func (p *peer) Info() *eth.PeerInfo {
return &eth.PeerInfo{
Version: p.version,
Difficulty: p.Td(),
Head: fmt.Sprintf("%x", p.Head()),
}
}
// Head retrieves a copy of the current head (most recent) hash of the peer.
func (p *peer) Head() (hash common.Hash) {
p.lock.RLock()
defer p.lock.RUnlock()
copy(hash[:], p.headInfo.Hash[:])
return hash
}
func (p *peer) HeadAndTd() (hash common.Hash, td *big.Int) {
p.lock.RLock()
defer p.lock.RUnlock()
copy(hash[:], p.headInfo.Hash[:])
return hash, p.headInfo.Td
}
func (p *peer) headBlockInfo() blockInfo {
p.lock.RLock()
defer p.lock.RUnlock()
return blockInfo{Hash: p.headInfo.Hash, Number: p.headInfo.Number, Td: p.headInfo.Td}
}
// Td retrieves the current total difficulty of a peer.
func (p *peer) Td() *big.Int {
p.lock.RLock()
defer p.lock.RUnlock()
return new(big.Int).Set(p.headInfo.Td)
}
// waitBefore implements distPeer interface
func (p *peer) waitBefore(maxCost uint64) (time.Duration, float64) {
return p.fcServer.CanSend(maxCost)
}
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 14:32:48 +03:00
// updateCapacity updates the request serving capacity assigned to a given client
// and also sends an announcement about the updated flow control parameters
func (p *peer) updateCapacity(cap uint64) {
p.responseLock.Lock()
defer p.responseLock.Unlock()
p.fcParams = flowcontrol.ServerParams{MinRecharge: cap, BufLimit: cap * bufLimitRatio}
p.fcClient.UpdateParams(p.fcParams)
var kvList keyValueList
kvList = kvList.add("flowControl/MRR", cap)
kvList = kvList.add("flowControl/BL", cap*bufLimitRatio)
p.queueSend(func() { p.SendAnnounce(announceData{Update: kvList}) })
}
func (p *peer) responseID() uint64 {
p.responseCount += 1
return p.responseCount
}
2016-10-14 06:51:29 +03:00
func sendRequest(w p2p.MsgWriter, msgcode, reqID, cost uint64, data interface{}) error {
type req struct {
ReqID uint64
Data interface{}
}
return p2p.Send(w, msgcode, req{reqID, data})
}
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 14:32:48 +03:00
// reply struct represents a reply with the actual data already RLP encoded and
// only the bv (buffer value) missing. This allows the serving mechanism to
// calculate the bv value which depends on the data size before sending the reply.
type reply struct {
w p2p.MsgWriter
msgcode, reqID uint64
data rlp.RawValue
}
// send sends the reply with the calculated buffer value
func (r *reply) send(bv uint64) error {
2016-10-14 06:51:29 +03:00
type resp struct {
ReqID, BV uint64
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 14:32:48 +03:00
Data rlp.RawValue
2016-10-14 06:51:29 +03:00
}
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 14:32:48 +03:00
return p2p.Send(r.w, r.msgcode, resp{r.reqID, bv, r.data})
}
// size returns the RLP encoded size of the message data
func (r *reply) size() uint32 {
return uint32(len(r.data))
2016-10-14 06:51:29 +03:00
}
func (p *peer) GetRequestCost(msgcode uint64, amount int) uint64 {
p.lock.RLock()
defer p.lock.RUnlock()
costs := p.fcCosts[msgcode]
if costs == nil {
return 0
}
cost := costs.baseCost + costs.reqCost*uint64(amount)
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 14:32:48 +03:00
if cost > p.fcParams.BufLimit {
cost = p.fcParams.BufLimit
}
return cost
}
func (p *peer) GetTxRelayCost(amount, size int) uint64 {
p.lock.RLock()
defer p.lock.RUnlock()
costs := p.fcCosts[SendTxV2Msg]
if costs == nil {
return 0
}
cost := costs.baseCost + costs.reqCost*uint64(amount)
sizeCost := costs.baseCost + costs.reqCost*uint64(size)/txSizeCostLimit
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 14:32:48 +03:00
if sizeCost > cost {
cost = sizeCost
}
if cost > p.fcParams.BufLimit {
cost = p.fcParams.BufLimit
2016-10-14 06:51:29 +03:00
}
return cost
}
// HasBlock checks if the peer has a given block
func (p *peer) HasBlock(hash common.Hash, number uint64, hasState bool) bool {
var head, since, recent uint64
p.lock.RLock()
if p.headInfo != nil {
head = p.headInfo.Number
}
if hasState {
since = p.stateSince
recent = p.stateRecent
} else {
since = p.chainSince
recent = p.chainRecent
}
hasBlock := p.hasBlock
p.lock.RUnlock()
return head >= number && number >= since && (recent == 0 || number+recent+4 > head) && hasBlock != nil && hasBlock(hash, number, hasState)
}
2016-10-14 06:51:29 +03:00
// SendAnnounce announces the availability of a number of blocks through
// a hash notification.
func (p *peer) SendAnnounce(request announceData) error {
return p2p.Send(p.rw, AnnounceMsg, request)
}
// SendStop notifies the client about being in frozen state
func (p *peer) SendStop() error {
return p2p.Send(p.rw, StopMsg, struct{}{})
}
// SendResume notifies the client about getting out of frozen state
func (p *peer) SendResume(bv uint64) error {
return p2p.Send(p.rw, ResumeMsg, bv)
}
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 14:32:48 +03:00
// ReplyBlockHeaders creates a reply with a batch of block headers
func (p *peer) ReplyBlockHeaders(reqID uint64, headers []*types.Header) *reply {
data, _ := rlp.EncodeToBytes(headers)
return &reply{p.rw, BlockHeadersMsg, reqID, data}
2016-10-14 06:51:29 +03:00
}
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 14:32:48 +03:00
// ReplyBlockBodiesRLP creates a reply with a batch of block contents from
2016-10-14 06:51:29 +03:00
// an already RLP encoded format.
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 14:32:48 +03:00
func (p *peer) ReplyBlockBodiesRLP(reqID uint64, bodies []rlp.RawValue) *reply {
data, _ := rlp.EncodeToBytes(bodies)
return &reply{p.rw, BlockBodiesMsg, reqID, data}
2016-10-14 06:51:29 +03:00
}
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 14:32:48 +03:00
// ReplyCode creates a reply with a batch of arbitrary internal data, corresponding to the
2016-10-14 06:51:29 +03:00
// hashes requested.
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 14:32:48 +03:00
func (p *peer) ReplyCode(reqID uint64, codes [][]byte) *reply {
data, _ := rlp.EncodeToBytes(codes)
return &reply{p.rw, CodeMsg, reqID, data}
2016-10-14 06:51:29 +03:00
}
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 14:32:48 +03:00
// ReplyReceiptsRLP creates a reply with a batch of transaction receipts, corresponding to the
2016-10-14 06:51:29 +03:00
// ones requested from an already RLP encoded format.
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 14:32:48 +03:00
func (p *peer) ReplyReceiptsRLP(reqID uint64, receipts []rlp.RawValue) *reply {
data, _ := rlp.EncodeToBytes(receipts)
return &reply{p.rw, ReceiptsMsg, reqID, data}
2016-10-14 06:51:29 +03:00
}
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 14:32:48 +03:00
// ReplyProofsV2 creates a reply with a batch of merkle proofs, corresponding to the ones requested.
func (p *peer) ReplyProofsV2(reqID uint64, proofs light.NodeList) *reply {
data, _ := rlp.EncodeToBytes(proofs)
return &reply{p.rw, ProofsV2Msg, reqID, data}
}
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 14:32:48 +03:00
// ReplyHelperTrieProofs creates a reply with a batch of HelperTrie proofs, corresponding to the ones requested.
func (p *peer) ReplyHelperTrieProofs(reqID uint64, resp HelperTrieResps) *reply {
data, _ := rlp.EncodeToBytes(resp)
return &reply{p.rw, HelperTrieProofsMsg, reqID, data}
}
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 14:32:48 +03:00
// ReplyTxStatus creates a reply with a batch of transaction status records, corresponding to the ones requested.
func (p *peer) ReplyTxStatus(reqID uint64, stats []light.TxStatus) *reply {
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 14:32:48 +03:00
data, _ := rlp.EncodeToBytes(stats)
return &reply{p.rw, TxStatusMsg, reqID, data}
}
2016-10-14 06:51:29 +03:00
// RequestHeadersByHash fetches a batch of blocks' headers corresponding to the
// specified header query, based on the hash of an origin block.
func (p *peer) RequestHeadersByHash(reqID, cost uint64, origin common.Hash, amount int, skip int, reverse bool) error {
p.Log().Debug("Fetching batch of headers", "count", amount, "fromhash", origin, "skip", skip, "reverse", reverse)
2016-10-14 06:51:29 +03:00
return sendRequest(p.rw, GetBlockHeadersMsg, reqID, cost, &getBlockHeadersData{Origin: hashOrNumber{Hash: origin}, Amount: uint64(amount), Skip: uint64(skip), Reverse: reverse})
}
// RequestHeadersByNumber fetches a batch of blocks' headers corresponding to the
// specified header query, based on the number of an origin block.
func (p *peer) RequestHeadersByNumber(reqID, cost, origin uint64, amount int, skip int, reverse bool) error {
p.Log().Debug("Fetching batch of headers", "count", amount, "fromnum", origin, "skip", skip, "reverse", reverse)
2016-10-14 06:51:29 +03:00
return sendRequest(p.rw, GetBlockHeadersMsg, reqID, cost, &getBlockHeadersData{Origin: hashOrNumber{Number: origin}, Amount: uint64(amount), Skip: uint64(skip), Reverse: reverse})
}
// RequestBodies fetches a batch of blocks' bodies corresponding to the hashes
// specified.
func (p *peer) RequestBodies(reqID, cost uint64, hashes []common.Hash) error {
p.Log().Debug("Fetching batch of block bodies", "count", len(hashes))
2016-10-14 06:51:29 +03:00
return sendRequest(p.rw, GetBlockBodiesMsg, reqID, cost, hashes)
}
// RequestCode fetches a batch of arbitrary data from a node's known state
// data, corresponding to the specified hashes.
func (p *peer) RequestCode(reqID, cost uint64, reqs []CodeReq) error {
p.Log().Debug("Fetching batch of codes", "count", len(reqs))
2016-10-14 06:51:29 +03:00
return sendRequest(p.rw, GetCodeMsg, reqID, cost, reqs)
}
// RequestReceipts fetches a batch of transaction receipts from a remote node.
func (p *peer) RequestReceipts(reqID, cost uint64, hashes []common.Hash) error {
p.Log().Debug("Fetching batch of receipts", "count", len(hashes))
2016-10-14 06:51:29 +03:00
return sendRequest(p.rw, GetReceiptsMsg, reqID, cost, hashes)
}
// RequestProofs fetches a batch of merkle proofs from a remote node.
func (p *peer) RequestProofs(reqID, cost uint64, reqs []ProofReq) error {
p.Log().Debug("Fetching batch of proofs", "count", len(reqs))
2019-04-05 18:01:51 +03:00
return sendRequest(p.rw, GetProofsV2Msg, reqID, cost, reqs)
}
// RequestHelperTrieProofs fetches a batch of HelperTrie merkle proofs from a remote node.
2019-04-05 18:01:51 +03:00
func (p *peer) RequestHelperTrieProofs(reqID, cost uint64, reqs []HelperTrieReq) error {
p.Log().Debug("Fetching batch of HelperTrie proofs", "count", len(reqs))
return sendRequest(p.rw, GetHelperTrieProofsMsg, reqID, cost, reqs)
2016-10-14 06:51:29 +03:00
}
// RequestTxStatus fetches a batch of transaction status records from a remote node.
func (p *peer) RequestTxStatus(reqID, cost uint64, txHashes []common.Hash) error {
p.Log().Debug("Requesting transaction status", "count", len(txHashes))
return sendRequest(p.rw, GetTxStatusMsg, reqID, cost, txHashes)
2016-10-14 06:51:29 +03:00
}
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 14:32:48 +03:00
// SendTxStatus creates a reply with a batch of transactions to be added to the remote transaction pool.
func (p *peer) SendTxs(reqID, cost uint64, txs rlp.RawValue) error {
p.Log().Debug("Sending batch of transactions", "size", len(txs))
2019-04-05 18:01:51 +03:00
return sendRequest(p.rw, SendTxV2Msg, reqID, cost, txs)
2016-10-14 06:51:29 +03:00
}
type keyValueEntry struct {
Key string
Value rlp.RawValue
}
type keyValueList []keyValueEntry
type keyValueMap map[string]rlp.RawValue
func (l keyValueList) add(key string, val interface{}) keyValueList {
var entry keyValueEntry
entry.Key = key
if val == nil {
val = uint64(0)
}
enc, err := rlp.EncodeToBytes(val)
if err == nil {
entry.Value = enc
}
return append(l, entry)
}
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 14:32:48 +03:00
func (l keyValueList) decode() (keyValueMap, uint64) {
2016-10-14 06:51:29 +03:00
m := make(keyValueMap)
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 14:32:48 +03:00
var size uint64
2016-10-14 06:51:29 +03:00
for _, entry := range l {
m[entry.Key] = entry.Value
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 14:32:48 +03:00
size += uint64(len(entry.Key)) + uint64(len(entry.Value)) + 8
2016-10-14 06:51:29 +03:00
}
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 14:32:48 +03:00
return m, size
2016-10-14 06:51:29 +03:00
}
func (m keyValueMap) get(key string, val interface{}) error {
enc, ok := m[key]
if !ok {
return errResp(ErrMissingKey, "%s", key)
2016-10-14 06:51:29 +03:00
}
if val == nil {
return nil
}
return rlp.DecodeBytes(enc, val)
}
func (p *peer) sendReceiveHandshake(sendList keyValueList) (keyValueList, error) {
// Send out own handshake in a new thread
errc := make(chan error, 1)
go func() {
errc <- p2p.Send(p.rw, StatusMsg, sendList)
}()
// In the mean time retrieve the remote status message
msg, err := p.rw.ReadMsg()
if err != nil {
return nil, err
}
if msg.Code != StatusMsg {
return nil, errResp(ErrNoStatusMsg, "first msg has code %x (!= %x)", msg.Code, StatusMsg)
}
if msg.Size > ProtocolMaxMsgSize {
return nil, errResp(ErrMsgTooLarge, "%v > %v", msg.Size, ProtocolMaxMsgSize)
}
// Decode the handshake
var recvList keyValueList
if err := msg.Decode(&recvList); err != nil {
return nil, errResp(ErrDecode, "msg %v: %v", msg, err)
}
if err := <-errc; err != nil {
return nil, err
}
return recvList, nil
}
// Handshake executes the les protocol handshake, negotiating version number,
// network IDs, difficulties, head and genesis blocks.
func (p *peer) Handshake(td *big.Int, head common.Hash, headNum uint64, genesis common.Hash, server *LesServer) error {
p.lock.Lock()
defer p.lock.Unlock()
var send keyValueList
// Add some basic handshake fields
2016-10-14 06:51:29 +03:00
send = send.add("protocolVersion", uint64(p.version))
send = send.add("networkId", p.network)
2016-10-14 06:51:29 +03:00
send = send.add("headTd", td)
send = send.add("headHash", head)
send = send.add("headNum", headNum)
send = send.add("genesisHash", genesis)
if server != nil {
// Add some information which services server can offer.
if !server.config.UltraLightOnlyAnnounce {
send = send.add("serveHeaders", nil)
send = send.add("serveChainSince", uint64(0))
send = send.add("serveStateSince", uint64(0))
// If local ethereum node is running in archive mode, advertise ourselves we have
// all version state data. Otherwise only recent state is available.
stateRecent := uint64(core.TriesInMemory - 4)
if server.archiveMode {
stateRecent = 0
}
send = send.add("serveRecentState", stateRecent)
send = send.add("txRelay", nil)
}
2016-10-14 06:51:29 +03:00
send = send.add("flowControl/BL", server.defParams.BufLimit)
send = send.add("flowControl/MRR", server.defParams.MinRecharge)
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 14:32:48 +03:00
var costList RequestCostList
if server.costTracker.testCostList != nil {
costList = server.costTracker.testCostList
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 14:32:48 +03:00
} else {
costList = server.costTracker.makeCostList(server.costTracker.globalFactor())
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 14:32:48 +03:00
}
send = send.add("flowControl/MRC", costList)
2019-05-13 14:26:47 +03:00
p.fcCosts = costList.decode(ProtocolLengths[uint(p.version)])
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 14:32:48 +03:00
p.fcParams = server.defParams
// Add advertised checkpoint and register block height which
// client can verify the checkpoint validity.
if server.oracle != nil && server.oracle.isRunning() {
cp, height := server.oracle.stableCheckpoint()
if cp != nil {
send = send.add("checkpoint/value", cp)
send = send.add("checkpoint/registerHeight", height)
}
}
} else {
// Add some client-specific handshake fields
p.announceType = announceTypeSimple
if p.trusted {
p.announceType = announceTypeSigned
}
send = send.add("announceType", p.announceType)
2016-10-14 06:51:29 +03:00
}
2016-10-14 06:51:29 +03:00
recvList, err := p.sendReceiveHandshake(send)
if err != nil {
return err
}
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 14:32:48 +03:00
recv, size := recvList.decode()
if p.rejectUpdate(size) {
return errResp(ErrRequestRejected, "")
}
2016-10-14 06:51:29 +03:00
var rGenesis, rHash common.Hash
var rVersion, rNetwork, rNum uint64
var rTd *big.Int
if err := recv.get("protocolVersion", &rVersion); err != nil {
return err
}
if err := recv.get("networkId", &rNetwork); err != nil {
return err
}
if err := recv.get("headTd", &rTd); err != nil {
return err
}
if err := recv.get("headHash", &rHash); err != nil {
return err
}
if err := recv.get("headNum", &rNum); err != nil {
return err
}
if err := recv.get("genesisHash", &rGenesis); err != nil {
return err
}
if rGenesis != genesis {
return errResp(ErrGenesisBlockMismatch, "%x (!= %x)", rGenesis[:8], genesis[:8])
2016-10-14 06:51:29 +03:00
}
if rNetwork != p.network {
2016-10-14 06:51:29 +03:00
return errResp(ErrNetworkIdMismatch, "%d (!= %d)", rNetwork, p.network)
}
if int(rVersion) != p.version {
return errResp(ErrProtocolVersionMismatch, "%d (!= %d)", rVersion, p.version)
}
2016-10-14 06:51:29 +03:00
if server != nil {
if recv.get("announceType", &p.announceType) != nil {
// set default announceType on server side
p.announceType = announceTypeSimple
}
2016-10-14 06:51:29 +03:00
p.fcClient = flowcontrol.NewClientNode(server.fcManager, server.defParams)
} else {
if recv.get("serveChainSince", &p.chainSince) != nil {
p.onlyAnnounce = true
2016-10-14 06:51:29 +03:00
}
if recv.get("serveRecentChain", &p.chainRecent) != nil {
p.chainRecent = 0
}
if recv.get("serveStateSince", &p.stateSince) != nil {
p.onlyAnnounce = true
2016-10-14 06:51:29 +03:00
}
if recv.get("serveRecentState", &p.stateRecent) != nil {
p.stateRecent = 0
}
2016-10-14 06:51:29 +03:00
if recv.get("txRelay", nil) != nil {
p.onlyAnnounce = true
2016-10-14 06:51:29 +03:00
}
if p.onlyAnnounce && !p.trusted {
return errResp(ErrUselessPeer, "peer cannot serve requests")
}
var sParams flowcontrol.ServerParams
if err := recv.get("flowControl/BL", &sParams.BufLimit); err != nil {
2016-10-14 06:51:29 +03:00
return err
}
if err := recv.get("flowControl/MRR", &sParams.MinRecharge); err != nil {
2016-10-14 06:51:29 +03:00
return err
}
var MRC RequestCostList
if err := recv.get("flowControl/MRC", &MRC); err != nil {
return err
}
p.fcParams = sParams
p.fcServer = flowcontrol.NewServerNode(sParams, &mclock.System{})
2019-05-13 14:26:47 +03:00
p.fcCosts = MRC.decode(ProtocolLengths[uint(p.version)])
recv.get("checkpoint/value", &p.checkpoint)
recv.get("checkpoint/registerHeight", &p.checkpointNumber)
if !p.onlyAnnounce {
for msgCode := range reqAvgTimeCost {
if p.fcCosts[msgCode] == nil {
return errResp(ErrUselessPeer, "peer does not support message %d", msgCode)
}
}
}
2016-10-14 06:51:29 +03:00
}
p.headInfo = &announceData{Td: rTd, Hash: rHash, Number: rNum}
2016-10-14 06:51:29 +03:00
return nil
}
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 14:32:48 +03:00
// updateFlowControl updates the flow control parameters belonging to the server
// node if the announced key/value set contains relevant fields
func (p *peer) updateFlowControl(update keyValueMap) {
if p.fcServer == nil {
return
}
// If any of the flow control params is nil, refuse to update.
var params flowcontrol.ServerParams
if update.get("flowControl/BL", &params.BufLimit) == nil && update.get("flowControl/MRR", &params.MinRecharge) == nil {
// todo can light client set a minimal acceptable flow control params?
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 14:32:48 +03:00
p.fcParams = params
p.fcServer.UpdateParams(params)
}
var MRC RequestCostList
if update.get("flowControl/MRC", &MRC) == nil {
2019-05-13 14:26:47 +03:00
costUpdate := MRC.decode(ProtocolLengths[uint(p.version)])
for code, cost := range costUpdate {
p.fcCosts[code] = cost
}
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 14:32:48 +03:00
}
}
2016-10-14 06:51:29 +03:00
// String implements fmt.Stringer.
func (p *peer) String() string {
return fmt.Sprintf("Peer %s [%s]", p.id,
fmt.Sprintf("les/%d", p.version),
)
}
// peerSetNotify is a callback interface to notify services about added or
// removed peers
type peerSetNotify interface {
registerPeer(*peer)
unregisterPeer(*peer)
}
2016-10-14 06:51:29 +03:00
// peerSet represents the collection of active peers currently participating in
// the Light Ethereum sub-protocol.
type peerSet struct {
peers map[string]*peer
lock sync.RWMutex
notifyList []peerSetNotify
closed bool
2016-10-14 06:51:29 +03:00
}
// newPeerSet creates a new peer set to track the active participants.
func newPeerSet() *peerSet {
return &peerSet{
peers: make(map[string]*peer),
}
}
// notify adds a service to be notified about added or removed peers
func (ps *peerSet) notify(n peerSetNotify) {
ps.lock.Lock()
ps.notifyList = append(ps.notifyList, n)
peers := make([]*peer, 0, len(ps.peers))
for _, p := range ps.peers {
peers = append(peers, p)
}
ps.lock.Unlock()
for _, p := range peers {
n.registerPeer(p)
}
}
2016-10-14 06:51:29 +03:00
// Register injects a new peer into the working set, or returns an error if the
// peer is already known.
func (ps *peerSet) Register(p *peer) error {
ps.lock.Lock()
if ps.closed {
ps.lock.Unlock()
2016-10-14 06:51:29 +03:00
return errClosed
}
if _, ok := ps.peers[p.id]; ok {
ps.lock.Unlock()
2016-10-14 06:51:29 +03:00
return errAlreadyRegistered
}
ps.peers[p.id] = p
p.sendQueue = newExecQueue(100)
peers := make([]peerSetNotify, len(ps.notifyList))
copy(peers, ps.notifyList)
ps.lock.Unlock()
for _, n := range peers {
n.registerPeer(p)
}
2016-10-14 06:51:29 +03:00
return nil
}
// Unregister removes a remote peer from the active set, disabling any further
// actions to/from that particular entity. It also initiates disconnection at the networking layer.
2016-10-14 06:51:29 +03:00
func (ps *peerSet) Unregister(id string) error {
ps.lock.Lock()
if p, ok := ps.peers[id]; !ok {
ps.lock.Unlock()
2016-10-14 06:51:29 +03:00
return errNotRegistered
} else {
delete(ps.peers, id)
peers := make([]peerSetNotify, len(ps.notifyList))
copy(peers, ps.notifyList)
ps.lock.Unlock()
for _, n := range peers {
n.unregisterPeer(p)
}
p.sendQueue.quit()
p.Peer.Disconnect(p2p.DiscUselessPeer)
return nil
2016-10-14 06:51:29 +03:00
}
}
// AllPeerIDs returns a list of all registered peer IDs
func (ps *peerSet) AllPeerIDs() []string {
ps.lock.RLock()
defer ps.lock.RUnlock()
res := make([]string, len(ps.peers))
idx := 0
2017-01-06 17:52:03 +03:00
for id := range ps.peers {
2016-10-14 06:51:29 +03:00
res[idx] = id
idx++
}
return res
}
// Peer retrieves the registered peer with the given id.
func (ps *peerSet) Peer(id string) *peer {
ps.lock.RLock()
defer ps.lock.RUnlock()
return ps.peers[id]
}
// Len returns if the current number of peers in the set.
func (ps *peerSet) Len() int {
ps.lock.RLock()
defer ps.lock.RUnlock()
return len(ps.peers)
}
// BestPeer retrieves the known peer with the currently highest total difficulty.
func (ps *peerSet) BestPeer() *peer {
ps.lock.RLock()
defer ps.lock.RUnlock()
var (
bestPeer *peer
bestTd *big.Int
)
for _, p := range ps.peers {
if td := p.Td(); bestPeer == nil || td.Cmp(bestTd) > 0 {
bestPeer, bestTd = p, td
}
}
return bestPeer
}
// AllPeers returns all peers in a list
func (ps *peerSet) AllPeers() []*peer {
ps.lock.RLock()
defer ps.lock.RUnlock()
list := make([]*peer, len(ps.peers))
i := 0
for _, peer := range ps.peers {
list[i] = peer
i++
}
return list
}
// Close disconnects all peers.
// No new peers can be registered after Close has returned.
func (ps *peerSet) Close() {
ps.lock.Lock()
defer ps.lock.Unlock()
for _, p := range ps.peers {
p.Disconnect(p2p.DiscQuitting)
}
ps.closed = true
}