bsc/swarm/network/stream/streamer_test.go

1366 lines
33 KiB
Go
Raw Normal View History

2018-06-20 15:06:27 +03:00
// Copyright 2018 The go-ethereum Authors
// This file is part of the go-ethereum library.
//
// The go-ethereum library is free software: you can redistribute it and/or modify
// it under the terms of the GNU Lesser General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// The go-ethereum library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU Lesser General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public License
// along with the go-ethereum library. If not, see <http://www.gnu.org/licenses/>.
package stream
import (
"bytes"
"context"
"errors"
"fmt"
Ci race detector handle failing tests (#19143) * swarm/storage: increase mget timeout in common_test.go TestDbStoreCorrect_1k sometimes timed out with -race on Travis. --- FAIL: TestDbStoreCorrect_1k (24.63s) common_test.go:194: testStore failed: timed out after 10s * swarm: remove unused vars from TestSnapshotSyncWithServer nodeCount and chunkCount is returned from setupSim and those values we use. * swarm: move race/norace helpers from stream to testutil As we will need to use the flag in other packages, too. * swarm: refactor TestSwarmNetwork case Extract long running test cases for better visibility. * swarm/network: skip TestSyncingViaGlobalSync with -race As panics on Travis. panic: runtime error: invalid memory address or nil pointer dereference [signal SIGSEGV: segmentation violation code=0x1 addr=0x0 pc=0x7e351b] * swarm: run TestSwarmNetwork with fewer nodes with -race As otherwise we always get test failure with `network_test.go:374: context deadline exceeded` even with raised `Timeout`. * swarm/network: run TestDeliveryFromNodes with fewer nodes with -race Test on Travis times out with 8 or more nodes if -race flag is present. * swarm/network: smaller node count for discovery tests with -race TestDiscoveryPersistenceSimulationSimAdapters failed on Travis with `-race` flag present. The failure was due to extensive memory usage, coming from the CGO runtime. Using a smaller node count resolves the issue. === RUN TestDiscoveryPersistenceSimulationSimAdapter ==7227==ERROR: ThreadSanitizer failed to allocate 0x80000 (524288) bytes of clock allocator (error code: 12) FATAL: ThreadSanitizer CHECK failed: ./gotsan.cc:6976 "((0 && "unable to mmap")) != (0)" (0x0, 0x0) FAIL github.com/ethereum/go-ethereum/swarm/network/simulations/discovery 804.826s * swarm/network: run TestFileRetrieval with fewer nodes with -race Otherwise we get a failure due to extensive memory usage, as the CGO runtime cannot allocate more bytes. === RUN TestFileRetrieval ==7366==ERROR: ThreadSanitizer failed to allocate 0x80000 (524288) bytes of clock allocator (error code: 12) FATAL: ThreadSanitizer CHECK failed: ./gotsan.cc:6976 "((0 && "unable to mmap")) != (0)" (0x0, 0x0) FAIL github.com/ethereum/go-ethereum/swarm/network/stream 155.165s * swarm/network: run TestRetrieval with fewer nodes with -race Otherwise we get a failure due to extensive memory usage, as the CGO runtime cannot allocate more bytes ("ThreadSanitizer failed to allocate"). * swarm/network: skip flaky TestGetSubscriptionsRPC on Travis w/ -race Test fails a lot with something like: streamer_test.go:1332: Real subscriptions and expected amount don't match; real: 0, expected: 20 * swarm/storage: skip TestDB_SubscribePull* tests on Travis w/ -race Travis just hangs... ok github.com/ethereum/go-ethereum/swarm/storage/feed/lookup 1.307s keepalive keepalive keepalive or panics after a while. Without these tests the race detector job is now stable. Let's invetigate these tests in a separate issue: https://github.com/ethersphere/go-ethereum/issues/1245
2019-02-21 00:57:42 +03:00
"os"
"strconv"
"strings"
"sync"
2018-06-20 15:06:27 +03:00
"testing"
"time"
Ci race detector handle failing tests (#19143) * swarm/storage: increase mget timeout in common_test.go TestDbStoreCorrect_1k sometimes timed out with -race on Travis. --- FAIL: TestDbStoreCorrect_1k (24.63s) common_test.go:194: testStore failed: timed out after 10s * swarm: remove unused vars from TestSnapshotSyncWithServer nodeCount and chunkCount is returned from setupSim and those values we use. * swarm: move race/norace helpers from stream to testutil As we will need to use the flag in other packages, too. * swarm: refactor TestSwarmNetwork case Extract long running test cases for better visibility. * swarm/network: skip TestSyncingViaGlobalSync with -race As panics on Travis. panic: runtime error: invalid memory address or nil pointer dereference [signal SIGSEGV: segmentation violation code=0x1 addr=0x0 pc=0x7e351b] * swarm: run TestSwarmNetwork with fewer nodes with -race As otherwise we always get test failure with `network_test.go:374: context deadline exceeded` even with raised `Timeout`. * swarm/network: run TestDeliveryFromNodes with fewer nodes with -race Test on Travis times out with 8 or more nodes if -race flag is present. * swarm/network: smaller node count for discovery tests with -race TestDiscoveryPersistenceSimulationSimAdapters failed on Travis with `-race` flag present. The failure was due to extensive memory usage, coming from the CGO runtime. Using a smaller node count resolves the issue. === RUN TestDiscoveryPersistenceSimulationSimAdapter ==7227==ERROR: ThreadSanitizer failed to allocate 0x80000 (524288) bytes of clock allocator (error code: 12) FATAL: ThreadSanitizer CHECK failed: ./gotsan.cc:6976 "((0 && "unable to mmap")) != (0)" (0x0, 0x0) FAIL github.com/ethereum/go-ethereum/swarm/network/simulations/discovery 804.826s * swarm/network: run TestFileRetrieval with fewer nodes with -race Otherwise we get a failure due to extensive memory usage, as the CGO runtime cannot allocate more bytes. === RUN TestFileRetrieval ==7366==ERROR: ThreadSanitizer failed to allocate 0x80000 (524288) bytes of clock allocator (error code: 12) FATAL: ThreadSanitizer CHECK failed: ./gotsan.cc:6976 "((0 && "unable to mmap")) != (0)" (0x0, 0x0) FAIL github.com/ethereum/go-ethereum/swarm/network/stream 155.165s * swarm/network: run TestRetrieval with fewer nodes with -race Otherwise we get a failure due to extensive memory usage, as the CGO runtime cannot allocate more bytes ("ThreadSanitizer failed to allocate"). * swarm/network: skip flaky TestGetSubscriptionsRPC on Travis w/ -race Test fails a lot with something like: streamer_test.go:1332: Real subscriptions and expected amount don't match; real: 0, expected: 20 * swarm/storage: skip TestDB_SubscribePull* tests on Travis w/ -race Travis just hangs... ok github.com/ethereum/go-ethereum/swarm/storage/feed/lookup 1.307s keepalive keepalive keepalive or panics after a while. Without these tests the race detector job is now stable. Let's invetigate these tests in a separate issue: https://github.com/ethersphere/go-ethereum/issues/1245
2019-02-21 00:57:42 +03:00
"github.com/ethereum/go-ethereum/swarm/testutil"
"github.com/ethereum/go-ethereum/common"
"github.com/ethereum/go-ethereum/log"
"github.com/ethereum/go-ethereum/node"
"github.com/ethereum/go-ethereum/p2p/enode"
"github.com/ethereum/go-ethereum/p2p/simulations/adapters"
2018-06-20 15:06:27 +03:00
p2ptest "github.com/ethereum/go-ethereum/p2p/testing"
"github.com/ethereum/go-ethereum/swarm/network"
"github.com/ethereum/go-ethereum/swarm/network/simulation"
"github.com/ethereum/go-ethereum/swarm/state"
"golang.org/x/crypto/sha3"
2018-06-20 15:06:27 +03:00
)
func TestStreamerSubscribe(t *testing.T) {
tester, streamer, _, teardown, err := newStreamerTester(nil)
2018-06-20 15:06:27 +03:00
if err != nil {
t.Fatal(err)
}
swarm: fix network/stream data races (#19051) * swarm/network/stream: newStreamerTester cleanup only if err is nil * swarm/network/stream: raise newStreamerTester waitForPeers timeout * swarm/network/stream: fix data races in GetPeerSubscriptions * swarm/storage: prevent data race on LDBStore.batchesC https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461775049 * swarm/network/stream: fix TestGetSubscriptionsRPC data race https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461768477 * swarm/network/stream: correctly use Simulation.Run callback https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461783804 * swarm/network: protect addrCountC in Kademlia.AddrCountC function https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462273444 * p2p/simulations: fix a deadlock calling getRandomNode with lock https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462317407 * swarm/network/stream: terminate disconnect goruotines in tests * swarm/network/stream: reduce memory consumption when testing data races * swarm/network/stream: add watchDisconnections helper function * swarm/network/stream: add concurrent counter for tests * swarm/network/stream: rename race/norace test files and use const * swarm/network/stream: remove watchSim and its panic * swarm/network/stream: pass context in watchDisconnections * swarm/network/stream: add concurrent safe bool for watchDisconnections * swarm/storage: fix LDBStore.batchesC data race by not closing it
2019-02-13 15:03:23 +03:00
defer teardown()
2018-06-20 15:06:27 +03:00
stream := NewStream("foo", "", true)
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
err = streamer.Subscribe(tester.Nodes[0].ID(), stream, NewRange(0, 0), Top)
2018-06-20 15:06:27 +03:00
if err == nil || err.Error() != "stream foo not registered" {
t.Fatalf("Expected error %v, got %v", "stream foo not registered", err)
}
}
func TestStreamerRequestSubscription(t *testing.T) {
tester, streamer, _, teardown, err := newStreamerTester(nil)
2018-06-20 15:06:27 +03:00
if err != nil {
t.Fatal(err)
}
swarm: fix network/stream data races (#19051) * swarm/network/stream: newStreamerTester cleanup only if err is nil * swarm/network/stream: raise newStreamerTester waitForPeers timeout * swarm/network/stream: fix data races in GetPeerSubscriptions * swarm/storage: prevent data race on LDBStore.batchesC https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461775049 * swarm/network/stream: fix TestGetSubscriptionsRPC data race https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461768477 * swarm/network/stream: correctly use Simulation.Run callback https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461783804 * swarm/network: protect addrCountC in Kademlia.AddrCountC function https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462273444 * p2p/simulations: fix a deadlock calling getRandomNode with lock https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462317407 * swarm/network/stream: terminate disconnect goruotines in tests * swarm/network/stream: reduce memory consumption when testing data races * swarm/network/stream: add watchDisconnections helper function * swarm/network/stream: add concurrent counter for tests * swarm/network/stream: rename race/norace test files and use const * swarm/network/stream: remove watchSim and its panic * swarm/network/stream: pass context in watchDisconnections * swarm/network/stream: add concurrent safe bool for watchDisconnections * swarm/storage: fix LDBStore.batchesC data race by not closing it
2019-02-13 15:03:23 +03:00
defer teardown()
2018-06-20 15:06:27 +03:00
stream := NewStream("foo", "", false)
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
err = streamer.RequestSubscription(tester.Nodes[0].ID(), stream, &Range{}, Top)
2018-06-20 15:06:27 +03:00
if err == nil || err.Error() != "stream foo not registered" {
t.Fatalf("Expected error %v, got %v", "stream foo not registered", err)
}
}
var (
hash0 = sha3.Sum256([]byte{0})
hash1 = sha3.Sum256([]byte{1})
hash2 = sha3.Sum256([]byte{2})
hashesTmp = append(hash0[:], hash1[:]...)
hashes = append(hashesTmp, hash2[:]...)
corruptHashes = append(hashes[:40])
2018-06-20 15:06:27 +03:00
)
type testClient struct {
t string
wait0 chan bool
wait2 chan bool
batchDone chan bool
receivedHashes map[string][]byte
}
func newTestClient(t string) *testClient {
return &testClient{
t: t,
wait0: make(chan bool),
wait2: make(chan bool),
batchDone: make(chan bool),
receivedHashes: make(map[string][]byte),
}
}
func (self *testClient) NeedData(ctx context.Context, hash []byte) func(context.Context) error {
2018-06-20 15:06:27 +03:00
self.receivedHashes[string(hash)] = hash
if bytes.Equal(hash, hash0[:]) {
return func(context.Context) error {
2018-06-20 15:06:27 +03:00
<-self.wait0
return nil
2018-06-20 15:06:27 +03:00
}
} else if bytes.Equal(hash, hash2[:]) {
return func(context.Context) error {
2018-06-20 15:06:27 +03:00
<-self.wait2
return nil
2018-06-20 15:06:27 +03:00
}
}
return nil
}
func (self *testClient) BatchDone(Stream, uint64, []byte, []byte) func() (*TakeoverProof, error) {
close(self.batchDone)
return nil
}
func (self *testClient) Close() {}
type testServer struct {
t string
sessionIndex uint64
2018-06-20 15:06:27 +03:00
}
func newTestServer(t string, sessionIndex uint64) *testServer {
2018-06-20 15:06:27 +03:00
return &testServer{
t: t,
sessionIndex: sessionIndex,
2018-06-20 15:06:27 +03:00
}
}
func (s *testServer) SessionIndex() (uint64, error) {
return s.sessionIndex, nil
}
2018-06-20 15:06:27 +03:00
func (self *testServer) SetNextBatch(from uint64, to uint64) ([]byte, uint64, uint64, *HandoverProof, error) {
return make([]byte, HashSize), from + 1, to + 1, nil, nil
}
func (self *testServer) GetData(context.Context, []byte) ([]byte, error) {
2018-06-20 15:06:27 +03:00
return nil, nil
}
func (self *testServer) Close() {
}
func TestStreamerDownstreamSubscribeUnsubscribeMsgExchange(t *testing.T) {
tester, streamer, _, teardown, err := newStreamerTester(nil)
2018-06-20 15:06:27 +03:00
if err != nil {
t.Fatal(err)
}
swarm: fix network/stream data races (#19051) * swarm/network/stream: newStreamerTester cleanup only if err is nil * swarm/network/stream: raise newStreamerTester waitForPeers timeout * swarm/network/stream: fix data races in GetPeerSubscriptions * swarm/storage: prevent data race on LDBStore.batchesC https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461775049 * swarm/network/stream: fix TestGetSubscriptionsRPC data race https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461768477 * swarm/network/stream: correctly use Simulation.Run callback https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461783804 * swarm/network: protect addrCountC in Kademlia.AddrCountC function https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462273444 * p2p/simulations: fix a deadlock calling getRandomNode with lock https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462317407 * swarm/network/stream: terminate disconnect goruotines in tests * swarm/network/stream: reduce memory consumption when testing data races * swarm/network/stream: add watchDisconnections helper function * swarm/network/stream: add concurrent counter for tests * swarm/network/stream: rename race/norace test files and use const * swarm/network/stream: remove watchSim and its panic * swarm/network/stream: pass context in watchDisconnections * swarm/network/stream: add concurrent safe bool for watchDisconnections * swarm/storage: fix LDBStore.batchesC data race by not closing it
2019-02-13 15:03:23 +03:00
defer teardown()
2018-06-20 15:06:27 +03:00
streamer.RegisterClientFunc("foo", func(p *Peer, t string, live bool) (Client, error) {
return newTestClient(t), nil
})
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
node := tester.Nodes[0]
2018-06-20 15:06:27 +03:00
stream := NewStream("foo", "", true)
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
err = streamer.Subscribe(node.ID(), stream, NewRange(5, 8), Top)
2018-06-20 15:06:27 +03:00
if err != nil {
t.Fatalf("Expected no error, got %v", err)
}
err = tester.TestExchanges(
p2ptest.Exchange{
Label: "Subscribe message",
Expects: []p2ptest.Expect{
{
Code: 4,
Msg: &SubscribeMsg{
Stream: stream,
History: NewRange(5, 8),
Priority: Top,
},
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
Peer: node.ID(),
2018-06-20 15:06:27 +03:00
},
},
},
// trigger OfferedHashesMsg to actually create the client
p2ptest.Exchange{
Label: "OfferedHashes message",
Triggers: []p2ptest.Trigger{
{
Code: 1,
Msg: &OfferedHashesMsg{
HandoverProof: &HandoverProof{
Handover: &Handover{},
},
Hashes: hashes,
From: 5,
To: 8,
Stream: stream,
},
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
Peer: node.ID(),
2018-06-20 15:06:27 +03:00
},
},
Expects: []p2ptest.Expect{
{
Code: 2,
Msg: &WantedHashesMsg{
Stream: stream,
Want: []byte{5},
From: 9,
To: 0,
},
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
Peer: node.ID(),
2018-06-20 15:06:27 +03:00
},
},
},
)
if err != nil {
t.Fatal(err)
}
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
err = streamer.Unsubscribe(node.ID(), stream)
2018-06-20 15:06:27 +03:00
if err != nil {
t.Fatalf("Expected no error, got %v", err)
}
err = tester.TestExchanges(p2ptest.Exchange{
Label: "Unsubscribe message",
Expects: []p2ptest.Expect{
{
Code: 0,
Msg: &UnsubscribeMsg{
Stream: stream,
},
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
Peer: node.ID(),
2018-06-20 15:06:27 +03:00
},
},
})
if err != nil {
t.Fatal(err)
}
}
func TestStreamerUpstreamSubscribeUnsubscribeMsgExchange(t *testing.T) {
tester, streamer, _, teardown, err := newStreamerTester(nil)
2018-06-20 15:06:27 +03:00
if err != nil {
t.Fatal(err)
}
swarm: fix network/stream data races (#19051) * swarm/network/stream: newStreamerTester cleanup only if err is nil * swarm/network/stream: raise newStreamerTester waitForPeers timeout * swarm/network/stream: fix data races in GetPeerSubscriptions * swarm/storage: prevent data race on LDBStore.batchesC https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461775049 * swarm/network/stream: fix TestGetSubscriptionsRPC data race https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461768477 * swarm/network/stream: correctly use Simulation.Run callback https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461783804 * swarm/network: protect addrCountC in Kademlia.AddrCountC function https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462273444 * p2p/simulations: fix a deadlock calling getRandomNode with lock https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462317407 * swarm/network/stream: terminate disconnect goruotines in tests * swarm/network/stream: reduce memory consumption when testing data races * swarm/network/stream: add watchDisconnections helper function * swarm/network/stream: add concurrent counter for tests * swarm/network/stream: rename race/norace test files and use const * swarm/network/stream: remove watchSim and its panic * swarm/network/stream: pass context in watchDisconnections * swarm/network/stream: add concurrent safe bool for watchDisconnections * swarm/storage: fix LDBStore.batchesC data race by not closing it
2019-02-13 15:03:23 +03:00
defer teardown()
2018-06-20 15:06:27 +03:00
stream := NewStream("foo", "", false)
streamer.RegisterServerFunc("foo", func(p *Peer, t string, live bool) (Server, error) {
return newTestServer(t, 10), nil
2018-06-20 15:06:27 +03:00
})
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
node := tester.Nodes[0]
2018-06-20 15:06:27 +03:00
err = tester.TestExchanges(p2ptest.Exchange{
Label: "Subscribe message",
Triggers: []p2ptest.Trigger{
{
Code: 4,
Msg: &SubscribeMsg{
Stream: stream,
History: NewRange(5, 8),
Priority: Top,
},
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
Peer: node.ID(),
2018-06-20 15:06:27 +03:00
},
},
Expects: []p2ptest.Expect{
{
Code: 1,
Msg: &OfferedHashesMsg{
Stream: stream,
HandoverProof: &HandoverProof{
Handover: &Handover{},
},
Hashes: make([]byte, HashSize),
From: 6,
To: 9,
},
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
Peer: node.ID(),
2018-06-20 15:06:27 +03:00
},
},
})
if err != nil {
t.Fatal(err)
}
err = tester.TestExchanges(p2ptest.Exchange{
Label: "unsubscribe message",
Triggers: []p2ptest.Trigger{
{
Code: 0,
Msg: &UnsubscribeMsg{
Stream: stream,
},
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
Peer: node.ID(),
2018-06-20 15:06:27 +03:00
},
},
})
if err != nil {
t.Fatal(err)
}
}
func TestStreamerUpstreamSubscribeUnsubscribeMsgExchangeLive(t *testing.T) {
tester, streamer, _, teardown, err := newStreamerTester(nil)
2018-06-20 15:06:27 +03:00
if err != nil {
t.Fatal(err)
}
swarm: fix network/stream data races (#19051) * swarm/network/stream: newStreamerTester cleanup only if err is nil * swarm/network/stream: raise newStreamerTester waitForPeers timeout * swarm/network/stream: fix data races in GetPeerSubscriptions * swarm/storage: prevent data race on LDBStore.batchesC https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461775049 * swarm/network/stream: fix TestGetSubscriptionsRPC data race https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461768477 * swarm/network/stream: correctly use Simulation.Run callback https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461783804 * swarm/network: protect addrCountC in Kademlia.AddrCountC function https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462273444 * p2p/simulations: fix a deadlock calling getRandomNode with lock https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462317407 * swarm/network/stream: terminate disconnect goruotines in tests * swarm/network/stream: reduce memory consumption when testing data races * swarm/network/stream: add watchDisconnections helper function * swarm/network/stream: add concurrent counter for tests * swarm/network/stream: rename race/norace test files and use const * swarm/network/stream: remove watchSim and its panic * swarm/network/stream: pass context in watchDisconnections * swarm/network/stream: add concurrent safe bool for watchDisconnections * swarm/storage: fix LDBStore.batchesC data race by not closing it
2019-02-13 15:03:23 +03:00
defer teardown()
2018-06-20 15:06:27 +03:00
stream := NewStream("foo", "", true)
streamer.RegisterServerFunc("foo", func(p *Peer, t string, live bool) (Server, error) {
return newTestServer(t, 0), nil
2018-06-20 15:06:27 +03:00
})
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
node := tester.Nodes[0]
2018-06-20 15:06:27 +03:00
err = tester.TestExchanges(p2ptest.Exchange{
Label: "Subscribe message",
Triggers: []p2ptest.Trigger{
{
Code: 4,
Msg: &SubscribeMsg{
Stream: stream,
Priority: Top,
},
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
Peer: node.ID(),
2018-06-20 15:06:27 +03:00
},
},
Expects: []p2ptest.Expect{
{
Code: 1,
Msg: &OfferedHashesMsg{
Stream: stream,
HandoverProof: &HandoverProof{
Handover: &Handover{},
},
Hashes: make([]byte, HashSize),
From: 1,
To: 0,
2018-06-20 15:06:27 +03:00
},
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
Peer: node.ID(),
2018-06-20 15:06:27 +03:00
},
},
})
if err != nil {
t.Fatal(err)
}
err = tester.TestExchanges(p2ptest.Exchange{
Label: "unsubscribe message",
Triggers: []p2ptest.Trigger{
{
Code: 0,
Msg: &UnsubscribeMsg{
Stream: stream,
},
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
Peer: node.ID(),
2018-06-20 15:06:27 +03:00
},
},
})
if err != nil {
t.Fatal(err)
}
}
func TestStreamerUpstreamSubscribeErrorMsgExchange(t *testing.T) {
tester, streamer, _, teardown, err := newStreamerTester(nil)
2018-06-20 15:06:27 +03:00
if err != nil {
t.Fatal(err)
}
swarm: fix network/stream data races (#19051) * swarm/network/stream: newStreamerTester cleanup only if err is nil * swarm/network/stream: raise newStreamerTester waitForPeers timeout * swarm/network/stream: fix data races in GetPeerSubscriptions * swarm/storage: prevent data race on LDBStore.batchesC https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461775049 * swarm/network/stream: fix TestGetSubscriptionsRPC data race https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461768477 * swarm/network/stream: correctly use Simulation.Run callback https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461783804 * swarm/network: protect addrCountC in Kademlia.AddrCountC function https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462273444 * p2p/simulations: fix a deadlock calling getRandomNode with lock https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462317407 * swarm/network/stream: terminate disconnect goruotines in tests * swarm/network/stream: reduce memory consumption when testing data races * swarm/network/stream: add watchDisconnections helper function * swarm/network/stream: add concurrent counter for tests * swarm/network/stream: rename race/norace test files and use const * swarm/network/stream: remove watchSim and its panic * swarm/network/stream: pass context in watchDisconnections * swarm/network/stream: add concurrent safe bool for watchDisconnections * swarm/storage: fix LDBStore.batchesC data race by not closing it
2019-02-13 15:03:23 +03:00
defer teardown()
2018-06-20 15:06:27 +03:00
streamer.RegisterServerFunc("foo", func(p *Peer, t string, live bool) (Server, error) {
return newTestServer(t, 0), nil
2018-06-20 15:06:27 +03:00
})
stream := NewStream("bar", "", true)
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
node := tester.Nodes[0]
2018-06-20 15:06:27 +03:00
err = tester.TestExchanges(p2ptest.Exchange{
Label: "Subscribe message",
Triggers: []p2ptest.Trigger{
{
Code: 4,
Msg: &SubscribeMsg{
Stream: stream,
History: NewRange(5, 8),
Priority: Top,
},
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
Peer: node.ID(),
2018-06-20 15:06:27 +03:00
},
},
Expects: []p2ptest.Expect{
{
Code: 7,
Msg: &SubscribeErrorMsg{
Error: "stream bar not registered",
},
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
Peer: node.ID(),
2018-06-20 15:06:27 +03:00
},
},
})
if err != nil {
t.Fatal(err)
}
}
func TestStreamerUpstreamSubscribeLiveAndHistory(t *testing.T) {
tester, streamer, _, teardown, err := newStreamerTester(nil)
2018-06-20 15:06:27 +03:00
if err != nil {
t.Fatal(err)
}
swarm: fix network/stream data races (#19051) * swarm/network/stream: newStreamerTester cleanup only if err is nil * swarm/network/stream: raise newStreamerTester waitForPeers timeout * swarm/network/stream: fix data races in GetPeerSubscriptions * swarm/storage: prevent data race on LDBStore.batchesC https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461775049 * swarm/network/stream: fix TestGetSubscriptionsRPC data race https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461768477 * swarm/network/stream: correctly use Simulation.Run callback https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461783804 * swarm/network: protect addrCountC in Kademlia.AddrCountC function https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462273444 * p2p/simulations: fix a deadlock calling getRandomNode with lock https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462317407 * swarm/network/stream: terminate disconnect goruotines in tests * swarm/network/stream: reduce memory consumption when testing data races * swarm/network/stream: add watchDisconnections helper function * swarm/network/stream: add concurrent counter for tests * swarm/network/stream: rename race/norace test files and use const * swarm/network/stream: remove watchSim and its panic * swarm/network/stream: pass context in watchDisconnections * swarm/network/stream: add concurrent safe bool for watchDisconnections * swarm/storage: fix LDBStore.batchesC data race by not closing it
2019-02-13 15:03:23 +03:00
defer teardown()
2018-06-20 15:06:27 +03:00
stream := NewStream("foo", "", true)
streamer.RegisterServerFunc("foo", func(p *Peer, t string, live bool) (Server, error) {
return newTestServer(t, 10), nil
2018-06-20 15:06:27 +03:00
})
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
node := tester.Nodes[0]
2018-06-20 15:06:27 +03:00
err = tester.TestExchanges(p2ptest.Exchange{
Label: "Subscribe message",
Triggers: []p2ptest.Trigger{
{
Code: 4,
Msg: &SubscribeMsg{
Stream: stream,
History: NewRange(5, 8),
Priority: Top,
},
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
Peer: node.ID(),
2018-06-20 15:06:27 +03:00
},
},
Expects: []p2ptest.Expect{
{
Code: 1,
Msg: &OfferedHashesMsg{
Stream: NewStream("foo", "", false),
HandoverProof: &HandoverProof{
Handover: &Handover{},
},
Hashes: make([]byte, HashSize),
From: 6,
To: 9,
},
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
Peer: node.ID(),
2018-06-20 15:06:27 +03:00
},
{
Code: 1,
Msg: &OfferedHashesMsg{
Stream: stream,
HandoverProof: &HandoverProof{
Handover: &Handover{},
},
From: 11,
To: 0,
2018-06-20 15:06:27 +03:00
Hashes: make([]byte, HashSize),
},
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
Peer: node.ID(),
2018-06-20 15:06:27 +03:00
},
},
})
if err != nil {
t.Fatal(err)
}
}
func TestStreamerDownstreamCorruptHashesMsgExchange(t *testing.T) {
tester, streamer, _, teardown, err := newStreamerTester(nil)
if err != nil {
t.Fatal(err)
}
swarm: fix network/stream data races (#19051) * swarm/network/stream: newStreamerTester cleanup only if err is nil * swarm/network/stream: raise newStreamerTester waitForPeers timeout * swarm/network/stream: fix data races in GetPeerSubscriptions * swarm/storage: prevent data race on LDBStore.batchesC https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461775049 * swarm/network/stream: fix TestGetSubscriptionsRPC data race https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461768477 * swarm/network/stream: correctly use Simulation.Run callback https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461783804 * swarm/network: protect addrCountC in Kademlia.AddrCountC function https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462273444 * p2p/simulations: fix a deadlock calling getRandomNode with lock https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462317407 * swarm/network/stream: terminate disconnect goruotines in tests * swarm/network/stream: reduce memory consumption when testing data races * swarm/network/stream: add watchDisconnections helper function * swarm/network/stream: add concurrent counter for tests * swarm/network/stream: rename race/norace test files and use const * swarm/network/stream: remove watchSim and its panic * swarm/network/stream: pass context in watchDisconnections * swarm/network/stream: add concurrent safe bool for watchDisconnections * swarm/storage: fix LDBStore.batchesC data race by not closing it
2019-02-13 15:03:23 +03:00
defer teardown()
stream := NewStream("foo", "", true)
var tc *testClient
streamer.RegisterClientFunc("foo", func(p *Peer, t string, live bool) (Client, error) {
tc = newTestClient(t)
return tc, nil
})
node := tester.Nodes[0]
err = streamer.Subscribe(node.ID(), stream, NewRange(5, 8), Top)
if err != nil {
t.Fatalf("Expected no error, got %v", err)
}
err = tester.TestExchanges(p2ptest.Exchange{
Label: "Subscribe message",
Expects: []p2ptest.Expect{
{
Code: 4,
Msg: &SubscribeMsg{
Stream: stream,
History: NewRange(5, 8),
Priority: Top,
},
Peer: node.ID(),
},
},
},
p2ptest.Exchange{
Label: "Corrupt offered hash message",
Triggers: []p2ptest.Trigger{
{
Code: 1,
Msg: &OfferedHashesMsg{
HandoverProof: &HandoverProof{
Handover: &Handover{},
},
Hashes: corruptHashes,
From: 5,
To: 8,
Stream: stream,
},
Peer: node.ID(),
},
},
})
if err != nil {
t.Fatal(err)
}
expectedError := errors.New("Message handler error: (msg code 1): error invalid hashes length (len: 40)")
if err := tester.TestDisconnected(&p2ptest.Disconnect{Peer: node.ID(), Error: expectedError}); err != nil {
t.Fatal(err)
}
}
2018-06-20 15:06:27 +03:00
func TestStreamerDownstreamOfferedHashesMsgExchange(t *testing.T) {
tester, streamer, _, teardown, err := newStreamerTester(nil)
2018-06-20 15:06:27 +03:00
if err != nil {
t.Fatal(err)
}
swarm: fix network/stream data races (#19051) * swarm/network/stream: newStreamerTester cleanup only if err is nil * swarm/network/stream: raise newStreamerTester waitForPeers timeout * swarm/network/stream: fix data races in GetPeerSubscriptions * swarm/storage: prevent data race on LDBStore.batchesC https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461775049 * swarm/network/stream: fix TestGetSubscriptionsRPC data race https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461768477 * swarm/network/stream: correctly use Simulation.Run callback https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461783804 * swarm/network: protect addrCountC in Kademlia.AddrCountC function https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462273444 * p2p/simulations: fix a deadlock calling getRandomNode with lock https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462317407 * swarm/network/stream: terminate disconnect goruotines in tests * swarm/network/stream: reduce memory consumption when testing data races * swarm/network/stream: add watchDisconnections helper function * swarm/network/stream: add concurrent counter for tests * swarm/network/stream: rename race/norace test files and use const * swarm/network/stream: remove watchSim and its panic * swarm/network/stream: pass context in watchDisconnections * swarm/network/stream: add concurrent safe bool for watchDisconnections * swarm/storage: fix LDBStore.batchesC data race by not closing it
2019-02-13 15:03:23 +03:00
defer teardown()
2018-06-20 15:06:27 +03:00
stream := NewStream("foo", "", true)
var tc *testClient
streamer.RegisterClientFunc("foo", func(p *Peer, t string, live bool) (Client, error) {
tc = newTestClient(t)
return tc, nil
})
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
node := tester.Nodes[0]
2018-06-20 15:06:27 +03:00
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
err = streamer.Subscribe(node.ID(), stream, NewRange(5, 8), Top)
2018-06-20 15:06:27 +03:00
if err != nil {
t.Fatalf("Expected no error, got %v", err)
}
err = tester.TestExchanges(p2ptest.Exchange{
Label: "Subscribe message",
Expects: []p2ptest.Expect{
{
Code: 4,
Msg: &SubscribeMsg{
Stream: stream,
History: NewRange(5, 8),
Priority: Top,
},
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
Peer: node.ID(),
2018-06-20 15:06:27 +03:00
},
},
},
p2ptest.Exchange{
Label: "WantedHashes message",
Triggers: []p2ptest.Trigger{
{
Code: 1,
Msg: &OfferedHashesMsg{
HandoverProof: &HandoverProof{
Handover: &Handover{},
},
Hashes: hashes,
From: 5,
To: 8,
Stream: stream,
},
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
Peer: node.ID(),
2018-06-20 15:06:27 +03:00
},
},
Expects: []p2ptest.Expect{
{
Code: 2,
Msg: &WantedHashesMsg{
Stream: stream,
Want: []byte{5},
From: 9,
To: 0,
},
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
Peer: node.ID(),
2018-06-20 15:06:27 +03:00
},
},
})
if err != nil {
t.Fatal(err)
}
if len(tc.receivedHashes) != 3 {
t.Fatalf("Expected number of received hashes %v, got %v", 3, len(tc.receivedHashes))
}
close(tc.wait0)
timeout := time.NewTimer(100 * time.Millisecond)
defer timeout.Stop()
select {
case <-tc.batchDone:
t.Fatal("batch done early")
case <-timeout.C:
}
close(tc.wait2)
timeout2 := time.NewTimer(10000 * time.Millisecond)
defer timeout2.Stop()
select {
case <-tc.batchDone:
case <-timeout2.C:
t.Fatal("timeout waiting batchdone call")
}
}
func TestStreamerRequestSubscriptionQuitMsgExchange(t *testing.T) {
tester, streamer, _, teardown, err := newStreamerTester(nil)
2018-06-20 15:06:27 +03:00
if err != nil {
t.Fatal(err)
}
swarm: fix network/stream data races (#19051) * swarm/network/stream: newStreamerTester cleanup only if err is nil * swarm/network/stream: raise newStreamerTester waitForPeers timeout * swarm/network/stream: fix data races in GetPeerSubscriptions * swarm/storage: prevent data race on LDBStore.batchesC https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461775049 * swarm/network/stream: fix TestGetSubscriptionsRPC data race https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461768477 * swarm/network/stream: correctly use Simulation.Run callback https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461783804 * swarm/network: protect addrCountC in Kademlia.AddrCountC function https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462273444 * p2p/simulations: fix a deadlock calling getRandomNode with lock https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462317407 * swarm/network/stream: terminate disconnect goruotines in tests * swarm/network/stream: reduce memory consumption when testing data races * swarm/network/stream: add watchDisconnections helper function * swarm/network/stream: add concurrent counter for tests * swarm/network/stream: rename race/norace test files and use const * swarm/network/stream: remove watchSim and its panic * swarm/network/stream: pass context in watchDisconnections * swarm/network/stream: add concurrent safe bool for watchDisconnections * swarm/storage: fix LDBStore.batchesC data race by not closing it
2019-02-13 15:03:23 +03:00
defer teardown()
2018-06-20 15:06:27 +03:00
streamer.RegisterServerFunc("foo", func(p *Peer, t string, live bool) (Server, error) {
return newTestServer(t, 10), nil
2018-06-20 15:06:27 +03:00
})
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
node := tester.Nodes[0]
2018-06-20 15:06:27 +03:00
stream := NewStream("foo", "", true)
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
err = streamer.RequestSubscription(node.ID(), stream, NewRange(5, 8), Top)
2018-06-20 15:06:27 +03:00
if err != nil {
t.Fatalf("Expected no error, got %v", err)
}
err = tester.TestExchanges(
p2ptest.Exchange{
Label: "RequestSubscription message",
Expects: []p2ptest.Expect{
{
Code: 8,
Msg: &RequestSubscriptionMsg{
Stream: stream,
History: NewRange(5, 8),
Priority: Top,
},
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
Peer: node.ID(),
2018-06-20 15:06:27 +03:00
},
},
},
p2ptest.Exchange{
Label: "Subscribe message",
Triggers: []p2ptest.Trigger{
{
Code: 4,
Msg: &SubscribeMsg{
Stream: stream,
History: NewRange(5, 8),
Priority: Top,
},
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
Peer: node.ID(),
2018-06-20 15:06:27 +03:00
},
},
Expects: []p2ptest.Expect{
{
Code: 1,
Msg: &OfferedHashesMsg{
Stream: NewStream("foo", "", false),
HandoverProof: &HandoverProof{
Handover: &Handover{},
},
Hashes: make([]byte, HashSize),
From: 6,
To: 9,
},
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
Peer: node.ID(),
2018-06-20 15:06:27 +03:00
},
{
Code: 1,
Msg: &OfferedHashesMsg{
Stream: stream,
HandoverProof: &HandoverProof{
Handover: &Handover{},
},
From: 11,
To: 0,
2018-06-20 15:06:27 +03:00
Hashes: make([]byte, HashSize),
},
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
Peer: node.ID(),
2018-06-20 15:06:27 +03:00
},
},
},
)
if err != nil {
t.Fatal(err)
}
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
err = streamer.Quit(node.ID(), stream)
2018-06-20 15:06:27 +03:00
if err != nil {
t.Fatalf("Expected no error, got %v", err)
}
err = tester.TestExchanges(p2ptest.Exchange{
Label: "Quit message",
Expects: []p2ptest.Expect{
{
Code: 9,
Msg: &QuitMsg{
Stream: stream,
},
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
Peer: node.ID(),
2018-06-20 15:06:27 +03:00
},
},
})
if err != nil {
t.Fatal(err)
}
historyStream := getHistoryStream(stream)
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
err = streamer.Quit(node.ID(), historyStream)
2018-06-20 15:06:27 +03:00
if err != nil {
t.Fatalf("Expected no error, got %v", err)
}
err = tester.TestExchanges(p2ptest.Exchange{
Label: "Quit message",
Expects: []p2ptest.Expect{
{
Code: 9,
Msg: &QuitMsg{
Stream: historyStream,
},
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
Peer: node.ID(),
2018-06-20 15:06:27 +03:00
},
},
})
if err != nil {
t.Fatal(err)
}
}
// TestMaxPeerServersWithUnsubscribe creates a registry with a limited
// number of stream servers, and performs a test with subscriptions and
// unsubscriptions, checking if unsubscriptions will remove streams,
// leaving place for new streams.
func TestMaxPeerServersWithUnsubscribe(t *testing.T) {
var maxPeerServers = 6
tester, streamer, _, teardown, err := newStreamerTester(&RegistryOptions{
Retrieval: RetrievalDisabled,
Syncing: SyncingDisabled,
MaxPeerServers: maxPeerServers,
})
if err != nil {
t.Fatal(err)
}
swarm: fix network/stream data races (#19051) * swarm/network/stream: newStreamerTester cleanup only if err is nil * swarm/network/stream: raise newStreamerTester waitForPeers timeout * swarm/network/stream: fix data races in GetPeerSubscriptions * swarm/storage: prevent data race on LDBStore.batchesC https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461775049 * swarm/network/stream: fix TestGetSubscriptionsRPC data race https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461768477 * swarm/network/stream: correctly use Simulation.Run callback https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461783804 * swarm/network: protect addrCountC in Kademlia.AddrCountC function https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462273444 * p2p/simulations: fix a deadlock calling getRandomNode with lock https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462317407 * swarm/network/stream: terminate disconnect goruotines in tests * swarm/network/stream: reduce memory consumption when testing data races * swarm/network/stream: add watchDisconnections helper function * swarm/network/stream: add concurrent counter for tests * swarm/network/stream: rename race/norace test files and use const * swarm/network/stream: remove watchSim and its panic * swarm/network/stream: pass context in watchDisconnections * swarm/network/stream: add concurrent safe bool for watchDisconnections * swarm/storage: fix LDBStore.batchesC data race by not closing it
2019-02-13 15:03:23 +03:00
defer teardown()
streamer.RegisterServerFunc("foo", func(p *Peer, t string, live bool) (Server, error) {
return newTestServer(t, 0), nil
})
node := tester.Nodes[0]
for i := 0; i < maxPeerServers+10; i++ {
stream := NewStream("foo", strconv.Itoa(i), true)
err = tester.TestExchanges(p2ptest.Exchange{
Label: "Subscribe message",
Triggers: []p2ptest.Trigger{
{
Code: 4,
Msg: &SubscribeMsg{
Stream: stream,
Priority: Top,
},
Peer: node.ID(),
},
},
Expects: []p2ptest.Expect{
{
Code: 1,
Msg: &OfferedHashesMsg{
Stream: stream,
HandoverProof: &HandoverProof{
Handover: &Handover{},
},
Hashes: make([]byte, HashSize),
From: 1,
To: 0,
},
Peer: node.ID(),
},
},
})
if err != nil {
t.Fatal(err)
}
err = tester.TestExchanges(p2ptest.Exchange{
Label: "unsubscribe message",
Triggers: []p2ptest.Trigger{
{
Code: 0,
Msg: &UnsubscribeMsg{
Stream: stream,
},
Peer: node.ID(),
},
},
})
if err != nil {
t.Fatal(err)
}
}
}
// TestMaxPeerServersWithoutUnsubscribe creates a registry with a limited
// number of stream servers, and performs subscriptions to detect subscriptions
// error message exchange.
func TestMaxPeerServersWithoutUnsubscribe(t *testing.T) {
var maxPeerServers = 6
tester, streamer, _, teardown, err := newStreamerTester(&RegistryOptions{
MaxPeerServers: maxPeerServers,
})
if err != nil {
t.Fatal(err)
}
swarm: fix network/stream data races (#19051) * swarm/network/stream: newStreamerTester cleanup only if err is nil * swarm/network/stream: raise newStreamerTester waitForPeers timeout * swarm/network/stream: fix data races in GetPeerSubscriptions * swarm/storage: prevent data race on LDBStore.batchesC https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461775049 * swarm/network/stream: fix TestGetSubscriptionsRPC data race https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461768477 * swarm/network/stream: correctly use Simulation.Run callback https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461783804 * swarm/network: protect addrCountC in Kademlia.AddrCountC function https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462273444 * p2p/simulations: fix a deadlock calling getRandomNode with lock https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462317407 * swarm/network/stream: terminate disconnect goruotines in tests * swarm/network/stream: reduce memory consumption when testing data races * swarm/network/stream: add watchDisconnections helper function * swarm/network/stream: add concurrent counter for tests * swarm/network/stream: rename race/norace test files and use const * swarm/network/stream: remove watchSim and its panic * swarm/network/stream: pass context in watchDisconnections * swarm/network/stream: add concurrent safe bool for watchDisconnections * swarm/storage: fix LDBStore.batchesC data race by not closing it
2019-02-13 15:03:23 +03:00
defer teardown()
streamer.RegisterServerFunc("foo", func(p *Peer, t string, live bool) (Server, error) {
return newTestServer(t, 0), nil
})
node := tester.Nodes[0]
for i := 0; i < maxPeerServers+10; i++ {
stream := NewStream("foo", strconv.Itoa(i), true)
if i >= maxPeerServers {
err = tester.TestExchanges(p2ptest.Exchange{
Label: "Subscribe message",
Triggers: []p2ptest.Trigger{
{
Code: 4,
Msg: &SubscribeMsg{
Stream: stream,
Priority: Top,
},
Peer: node.ID(),
},
},
Expects: []p2ptest.Expect{
{
Code: 7,
Msg: &SubscribeErrorMsg{
Error: ErrMaxPeerServers.Error(),
},
Peer: node.ID(),
},
},
})
if err != nil {
t.Fatal(err)
}
continue
}
err = tester.TestExchanges(p2ptest.Exchange{
Label: "Subscribe message",
Triggers: []p2ptest.Trigger{
{
Code: 4,
Msg: &SubscribeMsg{
Stream: stream,
Priority: Top,
},
Peer: node.ID(),
},
},
Expects: []p2ptest.Expect{
{
Code: 1,
Msg: &OfferedHashesMsg{
Stream: stream,
HandoverProof: &HandoverProof{
Handover: &Handover{},
},
Hashes: make([]byte, HashSize),
From: 1,
To: 0,
},
Peer: node.ID(),
},
},
})
if err != nil {
t.Fatal(err)
}
}
}
//TestHasPriceImplementation is to check that the Registry has a
//`Price` interface implementation
func TestHasPriceImplementation(t *testing.T) {
_, r, _, teardown, err := newStreamerTester(&RegistryOptions{
Retrieval: RetrievalDisabled,
Syncing: SyncingDisabled,
})
if err != nil {
t.Fatal(err)
}
swarm: fix network/stream data races (#19051) * swarm/network/stream: newStreamerTester cleanup only if err is nil * swarm/network/stream: raise newStreamerTester waitForPeers timeout * swarm/network/stream: fix data races in GetPeerSubscriptions * swarm/storage: prevent data race on LDBStore.batchesC https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461775049 * swarm/network/stream: fix TestGetSubscriptionsRPC data race https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461768477 * swarm/network/stream: correctly use Simulation.Run callback https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461783804 * swarm/network: protect addrCountC in Kademlia.AddrCountC function https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462273444 * p2p/simulations: fix a deadlock calling getRandomNode with lock https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462317407 * swarm/network/stream: terminate disconnect goruotines in tests * swarm/network/stream: reduce memory consumption when testing data races * swarm/network/stream: add watchDisconnections helper function * swarm/network/stream: add concurrent counter for tests * swarm/network/stream: rename race/norace test files and use const * swarm/network/stream: remove watchSim and its panic * swarm/network/stream: pass context in watchDisconnections * swarm/network/stream: add concurrent safe bool for watchDisconnections * swarm/storage: fix LDBStore.batchesC data race by not closing it
2019-02-13 15:03:23 +03:00
defer teardown()
if r.prices == nil {
t.Fatal("No prices implementation available for the stream protocol")
}
pricesInstance, ok := r.prices.(*StreamerPrices)
if !ok {
t.Fatal("`Registry` does not have the expected Prices instance")
}
price := pricesInstance.Price(&ChunkDeliveryMsgRetrieval{})
if price == nil || price.Value == 0 || price.Value != pricesInstance.getChunkDeliveryMsgRetrievalPrice() {
t.Fatal("No prices set for chunk delivery msg")
}
price = pricesInstance.Price(&RetrieveRequestMsg{})
if price == nil || price.Value == 0 || price.Value != pricesInstance.getRetrieveRequestMsgPrice() {
t.Fatal("No prices set for chunk delivery msg")
}
}
/*
TestRequestPeerSubscriptions is a unit test for stream's pull sync subscriptions.
The test does:
* assign each connected peer to a bin map
* build up a known kademlia in advance
* run the EachConn function, which returns supposed subscription bins
* store all supposed bins per peer in a map
* check that all peers have the expected subscriptions
This kad table and its peers are copied from network.TestKademliaCase1,
it represents an edge case but for the purpose of testing the
syncing subscriptions it is just fine.
Addresses used in this test are discovered as part of the simulation network
in higher level tests for streaming. They were generated randomly.
The resulting kademlia looks like this:
=========================================================================
Fri Dec 21 20:02:39 UTC 2018 KΛÐΞMLIΛ hive: queen's address: 7efef1
population: 12 (12), MinProxBinSize: 2, MinBinSize: 2, MaxBinSize: 4
000 2 8196 835f | 2 8196 (0) 835f (0)
001 2 2690 28f0 | 2 2690 (0) 28f0 (0)
002 2 4d72 4a45 | 2 4d72 (0) 4a45 (0)
003 1 646e | 1 646e (0)
004 3 769c 76d1 7656 | 3 769c (0) 76d1 (0) 7656 (0)
============ DEPTH: 5 ==========================================
005 1 7a48 | 1 7a48 (0)
006 1 7cbd | 1 7cbd (0)
007 0 | 0
008 0 | 0
009 0 | 0
010 0 | 0
011 0 | 0
012 0 | 0
013 0 | 0
014 0 | 0
015 0 | 0
=========================================================================
*/
func TestRequestPeerSubscriptions(t *testing.T) {
// the pivot address; this is the actual kademlia node
pivotAddr := "7efef1c41d77f843ad167be95f6660567eb8a4a59f39240000cce2e0d65baf8e"
// a map of bin number to addresses from the given kademlia
binMap := make(map[int][]string)
binMap[0] = []string{
"835fbbf1d16ba7347b6e2fc552d6e982148d29c624ea20383850df3c810fa8fc",
"81968a2d8fb39114342ee1da85254ec51e0608d7f0f6997c2a8354c260a71009",
}
binMap[1] = []string{
"28f0bc1b44658548d6e05dd16d4c2fe77f1da5d48b6774bc4263b045725d0c19",
"2690a910c33ee37b91eb6c4e0731d1d345e2dc3b46d308503a6e85bbc242c69e",
}
binMap[2] = []string{
"4a45f1fc63e1a9cb9dfa44c98da2f3d20c2923e5d75ff60b2db9d1bdb0c54d51",
"4d72a04ddeb851a68cd197ef9a92a3e2ff01fbbff638e64929dd1a9c2e150112",
}
binMap[3] = []string{
"646e9540c84f6a2f9cf6585d45a4c219573b4fd1b64a3c9a1386fc5cf98c0d4d",
}
binMap[4] = []string{
"7656caccdc79cd8d7ce66d415cc96a718e8271c62fb35746bfc2b49faf3eebf3",
"76d1e83c71ca246d042e37ff1db181f2776265fbcfdc890ce230bfa617c9c2f0",
"769ce86aa90b518b7ed382f9fdacfbed93574e18dc98fe6c342e4f9f409c2d5a",
}
binMap[5] = []string{
"7a48f75f8ca60487ae42d6f92b785581b40b91f2da551ae73d5eae46640e02e8",
}
binMap[6] = []string{
"7cbd42350bde8e18ae5b955b5450f8e2cef3419f92fbf5598160c60fd78619f0",
}
// create the pivot's kademlia
addr := common.FromHex(pivotAddr)
k := network.NewKademlia(addr, network.NewKadParams())
// construct the peers and the kademlia
for _, binaddrs := range binMap {
for _, a := range binaddrs {
addr := common.FromHex(a)
k.On(network.NewPeer(&network.BzzPeer{BzzAddr: &network.BzzAddr{OAddr: addr}}, k))
}
}
// TODO: check kad table is same
// currently k.String() prints date so it will never be the same :)
// --> implement JSON representation of kad table
log.Debug(k.String())
// simulate that we would do subscriptions: just store the bin numbers
fakeSubscriptions := make(map[string][]int)
//after the test, we need to reset the subscriptionFunc to the default
defer func() { subscriptionFunc = doRequestSubscription }()
// define the function which should run for each connection
// instead of doing real subscriptions, we just store the bin numbers
subscriptionFunc = func(r *Registry, p *network.Peer, bin uint8, subs map[enode.ID]map[Stream]struct{}) bool {
// get the peer ID
peerstr := fmt.Sprintf("%x", p.Over())
// create the array of bins per peer
if _, ok := fakeSubscriptions[peerstr]; !ok {
fakeSubscriptions[peerstr] = make([]int, 0)
}
// store the (fake) bin subscription
log.Debug(fmt.Sprintf("Adding fake subscription for peer %s with bin %d", peerstr, bin))
fakeSubscriptions[peerstr] = append(fakeSubscriptions[peerstr], int(bin))
return true
}
// create just a simple Registry object in order to be able to call...
r := &Registry{}
r.requestPeerSubscriptions(k, nil)
// calculate the kademlia depth
kdepth := k.NeighbourhoodDepth()
// now, check that all peers have the expected (fake) subscriptions
// iterate the bin map
for bin, peers := range binMap {
// for every peer...
for _, peer := range peers {
// ...get its (fake) subscriptions
fakeSubsForPeer := fakeSubscriptions[peer]
// if the peer's bin is shallower than the kademlia depth...
if bin < kdepth {
// (iterate all (fake) subscriptions)
for _, subbin := range fakeSubsForPeer {
// ...only the peer's bin should be "subscribed"
// (and thus have only one subscription)
if subbin != bin || len(fakeSubsForPeer) != 1 {
t.Fatalf("Did not get expected subscription for bin < depth; bin of peer %s: %d, subscription: %d", peer, bin, subbin)
}
}
} else { //if the peer's bin is equal or higher than the kademlia depth...
// (iterate all (fake) subscriptions)
for i, subbin := range fakeSubsForPeer {
// ...each bin from the peer's bin number up to k.MaxProxDisplay should be "subscribed"
// as we start from depth we can use the iteration index to check
if subbin != i+kdepth {
t.Fatalf("Did not get expected subscription for bin > depth; bin of peer %s: %d, subscription: %d", peer, bin, subbin)
}
// the last "subscription" should be k.MaxProxDisplay
if i == len(fakeSubsForPeer)-1 && subbin != k.MaxProxDisplay {
t.Fatalf("Expected last subscription to be: %d, but is: %d", k.MaxProxDisplay, subbin)
}
}
}
}
}
// print some output
for p, subs := range fakeSubscriptions {
log.Debug(fmt.Sprintf("Peer %s has the following fake subscriptions: ", p))
for _, bin := range subs {
log.Debug(fmt.Sprintf("%d,", bin))
}
}
}
// TestGetSubscriptions is a unit test for the api.GetPeerSubscriptions() function
func TestGetSubscriptions(t *testing.T) {
// create an amount of dummy peers
testPeerCount := 8
// every peer will have this amount of dummy servers
testServerCount := 4
// the peerMap which will store this data for the registry
peerMap := make(map[enode.ID]*Peer)
// create the registry
r := &Registry{}
api := NewAPI(r)
// call once, at this point should be empty
regs := api.GetPeerSubscriptions()
if len(regs) != 0 {
t.Fatal("Expected subscription count to be 0, but it is not")
}
// now create a number of dummy servers for each node
for i := 0; i < testPeerCount; i++ {
addr := network.RandomAddr()
id := addr.ID()
p := &Peer{}
p.servers = make(map[Stream]*server)
for k := 0; k < testServerCount; k++ {
s := Stream{
Name: strconv.Itoa(k),
Key: "",
Live: false,
}
p.servers[s] = &server{}
}
peerMap[id] = p
}
r.peers = peerMap
// call the subscriptions again
regs = api.GetPeerSubscriptions()
// count how many (fake) subscriptions there are
cnt := 0
for _, reg := range regs {
for range reg {
cnt++
}
}
// check expected value
expectedCount := testPeerCount * testServerCount
if cnt != expectedCount {
t.Fatalf("Expected %d subscriptions, but got %d", expectedCount, cnt)
}
}
/*
TestGetSubscriptionsRPC sets up a simulation network of `nodeCount` nodes,
starts the simulation, waits for SyncUpdateDelay in order to kick off
stream registration, then tests that there are subscriptions.
*/
func TestGetSubscriptionsRPC(t *testing.T) {
swarm: fix network/stream data races (#19051) * swarm/network/stream: newStreamerTester cleanup only if err is nil * swarm/network/stream: raise newStreamerTester waitForPeers timeout * swarm/network/stream: fix data races in GetPeerSubscriptions * swarm/storage: prevent data race on LDBStore.batchesC https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461775049 * swarm/network/stream: fix TestGetSubscriptionsRPC data race https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461768477 * swarm/network/stream: correctly use Simulation.Run callback https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461783804 * swarm/network: protect addrCountC in Kademlia.AddrCountC function https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462273444 * p2p/simulations: fix a deadlock calling getRandomNode with lock https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462317407 * swarm/network/stream: terminate disconnect goruotines in tests * swarm/network/stream: reduce memory consumption when testing data races * swarm/network/stream: add watchDisconnections helper function * swarm/network/stream: add concurrent counter for tests * swarm/network/stream: rename race/norace test files and use const * swarm/network/stream: remove watchSim and its panic * swarm/network/stream: pass context in watchDisconnections * swarm/network/stream: add concurrent safe bool for watchDisconnections * swarm/storage: fix LDBStore.batchesC data race by not closing it
2019-02-13 15:03:23 +03:00
Ci race detector handle failing tests (#19143) * swarm/storage: increase mget timeout in common_test.go TestDbStoreCorrect_1k sometimes timed out with -race on Travis. --- FAIL: TestDbStoreCorrect_1k (24.63s) common_test.go:194: testStore failed: timed out after 10s * swarm: remove unused vars from TestSnapshotSyncWithServer nodeCount and chunkCount is returned from setupSim and those values we use. * swarm: move race/norace helpers from stream to testutil As we will need to use the flag in other packages, too. * swarm: refactor TestSwarmNetwork case Extract long running test cases for better visibility. * swarm/network: skip TestSyncingViaGlobalSync with -race As panics on Travis. panic: runtime error: invalid memory address or nil pointer dereference [signal SIGSEGV: segmentation violation code=0x1 addr=0x0 pc=0x7e351b] * swarm: run TestSwarmNetwork with fewer nodes with -race As otherwise we always get test failure with `network_test.go:374: context deadline exceeded` even with raised `Timeout`. * swarm/network: run TestDeliveryFromNodes with fewer nodes with -race Test on Travis times out with 8 or more nodes if -race flag is present. * swarm/network: smaller node count for discovery tests with -race TestDiscoveryPersistenceSimulationSimAdapters failed on Travis with `-race` flag present. The failure was due to extensive memory usage, coming from the CGO runtime. Using a smaller node count resolves the issue. === RUN TestDiscoveryPersistenceSimulationSimAdapter ==7227==ERROR: ThreadSanitizer failed to allocate 0x80000 (524288) bytes of clock allocator (error code: 12) FATAL: ThreadSanitizer CHECK failed: ./gotsan.cc:6976 "((0 && "unable to mmap")) != (0)" (0x0, 0x0) FAIL github.com/ethereum/go-ethereum/swarm/network/simulations/discovery 804.826s * swarm/network: run TestFileRetrieval with fewer nodes with -race Otherwise we get a failure due to extensive memory usage, as the CGO runtime cannot allocate more bytes. === RUN TestFileRetrieval ==7366==ERROR: ThreadSanitizer failed to allocate 0x80000 (524288) bytes of clock allocator (error code: 12) FATAL: ThreadSanitizer CHECK failed: ./gotsan.cc:6976 "((0 && "unable to mmap")) != (0)" (0x0, 0x0) FAIL github.com/ethereum/go-ethereum/swarm/network/stream 155.165s * swarm/network: run TestRetrieval with fewer nodes with -race Otherwise we get a failure due to extensive memory usage, as the CGO runtime cannot allocate more bytes ("ThreadSanitizer failed to allocate"). * swarm/network: skip flaky TestGetSubscriptionsRPC on Travis w/ -race Test fails a lot with something like: streamer_test.go:1332: Real subscriptions and expected amount don't match; real: 0, expected: 20 * swarm/storage: skip TestDB_SubscribePull* tests on Travis w/ -race Travis just hangs... ok github.com/ethereum/go-ethereum/swarm/storage/feed/lookup 1.307s keepalive keepalive keepalive or panics after a while. Without these tests the race detector job is now stable. Let's invetigate these tests in a separate issue: https://github.com/ethersphere/go-ethereum/issues/1245
2019-02-21 00:57:42 +03:00
if testutil.RaceEnabled && os.Getenv("TRAVIS") == "true" {
t.Skip("flaky with -race on Travis")
// Note: related ticket https://github.com/ethersphere/go-ethereum/issues/1234
}
// arbitrarily set to 4
nodeCount := 4
// run with more nodes if `longrunning` flag is set
if *longrunning {
nodeCount = 64
}
// set the syncUpdateDelay for sync registrations to start
syncUpdateDelay := 200 * time.Millisecond
// holds the msg code for SubscribeMsg
var subscribeMsgCode uint64
var ok bool
swarm: fix network/stream data races (#19051) * swarm/network/stream: newStreamerTester cleanup only if err is nil * swarm/network/stream: raise newStreamerTester waitForPeers timeout * swarm/network/stream: fix data races in GetPeerSubscriptions * swarm/storage: prevent data race on LDBStore.batchesC https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461775049 * swarm/network/stream: fix TestGetSubscriptionsRPC data race https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461768477 * swarm/network/stream: correctly use Simulation.Run callback https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461783804 * swarm/network: protect addrCountC in Kademlia.AddrCountC function https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462273444 * p2p/simulations: fix a deadlock calling getRandomNode with lock https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462317407 * swarm/network/stream: terminate disconnect goruotines in tests * swarm/network/stream: reduce memory consumption when testing data races * swarm/network/stream: add watchDisconnections helper function * swarm/network/stream: add concurrent counter for tests * swarm/network/stream: rename race/norace test files and use const * swarm/network/stream: remove watchSim and its panic * swarm/network/stream: pass context in watchDisconnections * swarm/network/stream: add concurrent safe bool for watchDisconnections * swarm/storage: fix LDBStore.batchesC data race by not closing it
2019-02-13 15:03:23 +03:00
var expectedMsgCount counter
// this channel signalizes that the expected amount of subscriptiosn is done
allSubscriptionsDone := make(chan struct{})
// after the test, we need to reset the subscriptionFunc to the default
defer func() { subscriptionFunc = doRequestSubscription }()
// we use this subscriptionFunc for this test: just increases count and calls the actual subscription
subscriptionFunc = func(r *Registry, p *network.Peer, bin uint8, subs map[enode.ID]map[Stream]struct{}) bool {
swarm: fix network/stream data races (#19051) * swarm/network/stream: newStreamerTester cleanup only if err is nil * swarm/network/stream: raise newStreamerTester waitForPeers timeout * swarm/network/stream: fix data races in GetPeerSubscriptions * swarm/storage: prevent data race on LDBStore.batchesC https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461775049 * swarm/network/stream: fix TestGetSubscriptionsRPC data race https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461768477 * swarm/network/stream: correctly use Simulation.Run callback https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461783804 * swarm/network: protect addrCountC in Kademlia.AddrCountC function https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462273444 * p2p/simulations: fix a deadlock calling getRandomNode with lock https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462317407 * swarm/network/stream: terminate disconnect goruotines in tests * swarm/network/stream: reduce memory consumption when testing data races * swarm/network/stream: add watchDisconnections helper function * swarm/network/stream: add concurrent counter for tests * swarm/network/stream: rename race/norace test files and use const * swarm/network/stream: remove watchSim and its panic * swarm/network/stream: pass context in watchDisconnections * swarm/network/stream: add concurrent safe bool for watchDisconnections * swarm/storage: fix LDBStore.batchesC data race by not closing it
2019-02-13 15:03:23 +03:00
expectedMsgCount.inc()
doRequestSubscription(r, p, bin, subs)
return true
}
// create a standard sim
sim := simulation.New(map[string]simulation.ServiceFunc{
"streamer": func(ctx *adapters.ServiceContext, bucket *sync.Map) (s node.Service, cleanup func(), err error) {
addr, netStore, delivery, clean, err := newNetStoreAndDeliveryWithRequestFunc(ctx, bucket, dummyRequestFromPeers)
if err != nil {
return nil, nil, err
}
// configure so that sync registrations actually happen
r := NewRegistry(addr.ID(), delivery, netStore, state.NewInmemoryStore(), &RegistryOptions{
Retrieval: RetrievalEnabled,
Syncing: SyncingAutoSubscribe, //enable sync registrations
SyncUpdateDelay: syncUpdateDelay,
}, nil)
// get the SubscribeMsg code
subscribeMsgCode, ok = r.GetSpec().GetCode(SubscribeMsg{})
if !ok {
t.Fatal("Message code for SubscribeMsg not found")
}
cleanup = func() {
r.Close()
clean()
}
return r, cleanup, nil
},
})
defer sim.Close()
ctx, cancelSimRun := context.WithTimeout(context.Background(), 1*time.Minute)
defer cancelSimRun()
// upload a snapshot
err := sim.UploadSnapshot(fmt.Sprintf("testing/snapshot_%d.json", nodeCount))
if err != nil {
t.Fatal(err)
}
// setup the filter for SubscribeMsg
msgs := sim.PeerEvents(
context.Background(),
sim.NodeIDs(),
simulation.NewPeerEventsFilter().ReceivedMessages().Protocol("stream").MsgCode(subscribeMsgCode),
)
// strategy: listen to all SubscribeMsg events; after every event we wait
// if after `waitDuration` no more messages are being received, we assume the
// subscription phase has terminated!
// the loop in this go routine will either wait for new message events
// or times out after 1 second, which signals that we are not receiving
// any new subscriptions any more
go func() {
//for long running sims, waiting 1 sec will not be enough
waitDuration := time.Duration(nodeCount/16) * time.Second
for {
select {
case <-ctx.Done():
return
case m := <-msgs: // just reset the loop
if m.Error != nil {
log.Error("stream message", "err", m.Error)
continue
}
log.Trace("stream message", "node", m.NodeID, "peer", m.PeerID)
case <-time.After(waitDuration):
// one second passed, don't assume more subscriptions
allSubscriptionsDone <- struct{}{}
log.Info("All subscriptions received")
return
}
}
}()
//run the simulation
result := sim.Run(ctx, func(ctx context.Context, sim *simulation.Simulation) error {
log.Info("Simulation running")
nodes := sim.Net.Nodes
//wait until all subscriptions are done
select {
case <-allSubscriptionsDone:
case <-ctx.Done():
swarm: fix network/stream data races (#19051) * swarm/network/stream: newStreamerTester cleanup only if err is nil * swarm/network/stream: raise newStreamerTester waitForPeers timeout * swarm/network/stream: fix data races in GetPeerSubscriptions * swarm/storage: prevent data race on LDBStore.batchesC https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461775049 * swarm/network/stream: fix TestGetSubscriptionsRPC data race https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461768477 * swarm/network/stream: correctly use Simulation.Run callback https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461783804 * swarm/network: protect addrCountC in Kademlia.AddrCountC function https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462273444 * p2p/simulations: fix a deadlock calling getRandomNode with lock https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462317407 * swarm/network/stream: terminate disconnect goruotines in tests * swarm/network/stream: reduce memory consumption when testing data races * swarm/network/stream: add watchDisconnections helper function * swarm/network/stream: add concurrent counter for tests * swarm/network/stream: rename race/norace test files and use const * swarm/network/stream: remove watchSim and its panic * swarm/network/stream: pass context in watchDisconnections * swarm/network/stream: add concurrent safe bool for watchDisconnections * swarm/storage: fix LDBStore.batchesC data race by not closing it
2019-02-13 15:03:23 +03:00
return errors.New("Context timed out")
}
swarm: fix network/stream data races (#19051) * swarm/network/stream: newStreamerTester cleanup only if err is nil * swarm/network/stream: raise newStreamerTester waitForPeers timeout * swarm/network/stream: fix data races in GetPeerSubscriptions * swarm/storage: prevent data race on LDBStore.batchesC https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461775049 * swarm/network/stream: fix TestGetSubscriptionsRPC data race https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461768477 * swarm/network/stream: correctly use Simulation.Run callback https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461783804 * swarm/network: protect addrCountC in Kademlia.AddrCountC function https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462273444 * p2p/simulations: fix a deadlock calling getRandomNode with lock https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462317407 * swarm/network/stream: terminate disconnect goruotines in tests * swarm/network/stream: reduce memory consumption when testing data races * swarm/network/stream: add watchDisconnections helper function * swarm/network/stream: add concurrent counter for tests * swarm/network/stream: rename race/norace test files and use const * swarm/network/stream: remove watchSim and its panic * swarm/network/stream: pass context in watchDisconnections * swarm/network/stream: add concurrent safe bool for watchDisconnections * swarm/storage: fix LDBStore.batchesC data race by not closing it
2019-02-13 15:03:23 +03:00
log.Debug("Expected message count: ", "expectedMsgCount", expectedMsgCount.count())
//now iterate again, this time we call each node via RPC to get its subscriptions
realCount := 0
for _, node := range nodes {
//create rpc client
client, err := node.Client()
if err != nil {
swarm: fix network/stream data races (#19051) * swarm/network/stream: newStreamerTester cleanup only if err is nil * swarm/network/stream: raise newStreamerTester waitForPeers timeout * swarm/network/stream: fix data races in GetPeerSubscriptions * swarm/storage: prevent data race on LDBStore.batchesC https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461775049 * swarm/network/stream: fix TestGetSubscriptionsRPC data race https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461768477 * swarm/network/stream: correctly use Simulation.Run callback https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461783804 * swarm/network: protect addrCountC in Kademlia.AddrCountC function https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462273444 * p2p/simulations: fix a deadlock calling getRandomNode with lock https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462317407 * swarm/network/stream: terminate disconnect goruotines in tests * swarm/network/stream: reduce memory consumption when testing data races * swarm/network/stream: add watchDisconnections helper function * swarm/network/stream: add concurrent counter for tests * swarm/network/stream: rename race/norace test files and use const * swarm/network/stream: remove watchSim and its panic * swarm/network/stream: pass context in watchDisconnections * swarm/network/stream: add concurrent safe bool for watchDisconnections * swarm/storage: fix LDBStore.batchesC data race by not closing it
2019-02-13 15:03:23 +03:00
return fmt.Errorf("create node 1 rpc client fail: %v", err)
}
//ask it for subscriptions
pstreams := make(map[string][]string)
err = client.Call(&pstreams, "stream_getPeerSubscriptions")
if err != nil {
swarm: fix network/stream data races (#19051) * swarm/network/stream: newStreamerTester cleanup only if err is nil * swarm/network/stream: raise newStreamerTester waitForPeers timeout * swarm/network/stream: fix data races in GetPeerSubscriptions * swarm/storage: prevent data race on LDBStore.batchesC https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461775049 * swarm/network/stream: fix TestGetSubscriptionsRPC data race https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461768477 * swarm/network/stream: correctly use Simulation.Run callback https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461783804 * swarm/network: protect addrCountC in Kademlia.AddrCountC function https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462273444 * p2p/simulations: fix a deadlock calling getRandomNode with lock https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462317407 * swarm/network/stream: terminate disconnect goruotines in tests * swarm/network/stream: reduce memory consumption when testing data races * swarm/network/stream: add watchDisconnections helper function * swarm/network/stream: add concurrent counter for tests * swarm/network/stream: rename race/norace test files and use const * swarm/network/stream: remove watchSim and its panic * swarm/network/stream: pass context in watchDisconnections * swarm/network/stream: add concurrent safe bool for watchDisconnections * swarm/storage: fix LDBStore.batchesC data race by not closing it
2019-02-13 15:03:23 +03:00
return fmt.Errorf("client call stream_getPeerSubscriptions: %v", err)
}
//length of the subscriptions can not be smaller than number of peers
log.Debug("node subscriptions", "node", node.String())
for p, ps := range pstreams {
log.Debug("... with", "peer", p)
for _, s := range ps {
log.Debug(".......", "stream", s)
// each node also has subscriptions to RETRIEVE_REQUEST streams,
// we need to ignore those, we are only counting SYNC streams
if !strings.HasPrefix(s, "RETRIEVE_REQUEST") {
realCount++
}
}
}
}
// every node is mutually subscribed to each other, so the actual count is half of it
swarm: fix network/stream data races (#19051) * swarm/network/stream: newStreamerTester cleanup only if err is nil * swarm/network/stream: raise newStreamerTester waitForPeers timeout * swarm/network/stream: fix data races in GetPeerSubscriptions * swarm/storage: prevent data race on LDBStore.batchesC https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461775049 * swarm/network/stream: fix TestGetSubscriptionsRPC data race https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461768477 * swarm/network/stream: correctly use Simulation.Run callback https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461783804 * swarm/network: protect addrCountC in Kademlia.AddrCountC function https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462273444 * p2p/simulations: fix a deadlock calling getRandomNode with lock https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462317407 * swarm/network/stream: terminate disconnect goruotines in tests * swarm/network/stream: reduce memory consumption when testing data races * swarm/network/stream: add watchDisconnections helper function * swarm/network/stream: add concurrent counter for tests * swarm/network/stream: rename race/norace test files and use const * swarm/network/stream: remove watchSim and its panic * swarm/network/stream: pass context in watchDisconnections * swarm/network/stream: add concurrent safe bool for watchDisconnections * swarm/storage: fix LDBStore.batchesC data race by not closing it
2019-02-13 15:03:23 +03:00
emc := expectedMsgCount.count()
if realCount/2 != emc {
return fmt.Errorf("Real subscriptions and expected amount don't match; real: %d, expected: %d", realCount/2, emc)
}
return nil
})
if result.Error != nil {
t.Fatal(result.Error)
}
}
swarm: fix network/stream data races (#19051) * swarm/network/stream: newStreamerTester cleanup only if err is nil * swarm/network/stream: raise newStreamerTester waitForPeers timeout * swarm/network/stream: fix data races in GetPeerSubscriptions * swarm/storage: prevent data race on LDBStore.batchesC https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461775049 * swarm/network/stream: fix TestGetSubscriptionsRPC data race https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461768477 * swarm/network/stream: correctly use Simulation.Run callback https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461783804 * swarm/network: protect addrCountC in Kademlia.AddrCountC function https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462273444 * p2p/simulations: fix a deadlock calling getRandomNode with lock https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462317407 * swarm/network/stream: terminate disconnect goruotines in tests * swarm/network/stream: reduce memory consumption when testing data races * swarm/network/stream: add watchDisconnections helper function * swarm/network/stream: add concurrent counter for tests * swarm/network/stream: rename race/norace test files and use const * swarm/network/stream: remove watchSim and its panic * swarm/network/stream: pass context in watchDisconnections * swarm/network/stream: add concurrent safe bool for watchDisconnections * swarm/storage: fix LDBStore.batchesC data race by not closing it
2019-02-13 15:03:23 +03:00
// counter is used to concurrently increment
// and read an integer value.
type counter struct {
v int
mu sync.RWMutex
}
// Increment the counter.
func (c *counter) inc() {
c.mu.Lock()
defer c.mu.Unlock()
c.v++
}
// Read the counter value.
func (c *counter) count() int {
c.mu.RLock()
defer c.mu.RUnlock()
return c.v
}