This removes auto-configuration of the snap.*.ethdisco.net DNS discovery tree.
Since measurements have shown that > 75% of nodes in all.*.ethdisco.net support
snap, we have decided to retire the dedicated index for snap and just use the eth
tree instead.
The dial iterators of eth and snap now use the same DNS tree in the default configuration,
so both iterators should use the same DNS discovery client instance. This ensures that
the record cache and rate limit are shared. Records will not be requested multiple times.
While testing the change, I noticed that duplicate DNS requests do happen even
when the client instance is shared. This is because the two iterators request the tree
root, link tree root, and first levels of the tree in lockstep. To avoid this problem, the
change also adds a singleflight.Group instance in the client. When one iterator
attempts to resolve an entry which is already being resolved, the singleflight object
waits for the existing resolve call to finish and returns the entry to both places.
This change adds the --catalyst flag, enabling an RPC API for eth2 integration.
In this initial version, catalyst mode also disables all peer-to-peer networking.
Co-authored-by: Mikhail Kalinin <noblesse.knight@gmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
The PR implements the --miner.notify.full flag that enables full pending block
notifications. When this flag is used, the block notifications sent to mining
endpoints contain the complete block header JSON instead of a work package
array.
Co-authored-by: AlexSSD7 <alexandersadovskyi7@protonmail.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
This PR prevents users from submitting transactions without EIP-155 enabled. This behaviour can be overridden by specifying the flag --rpc.allow-unprotected-txs=true.
This moves the eth config definition into a separate package, eth/ethconfig.
Packages eth and les can now import this common package instead of
importing eth from les, reducing dependencies.
Co-authored-by: Felix Lange <fjl@twurst.com>
During the snap and eth refactor, the net_version rpc call was falsely deprecated.
This restores the net_version RPC handler as most eth2 nodes and other software
depend on it.
This commit splits the eth package, separating the handling of eth and snap protocols. It also includes the capability to run snap sync (https://github.com/ethereum/devp2p/blob/master/caps/snap.md) , but does not enable it by default.
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Co-authored-by: Martin Holst Swende <martin@swende.se>
This PR implements unclean shutdown marker. Every time geth boots, it adds a timestamp to a list of timestamps in the database. This list is capped at 10. At a clean shutdown, the timestamp is removed again.
Thus, when geth exits unclean, the marker remains, and at boot up we show the most recent unclean shutdowns to the user, which makes it easier to diagnose root-causes to certain problems.
Co-authored-by: Nagy Salem <me@muhnagy.com>
This PR significantly changes the APIs for instantiating Ethereum nodes in
a Go program. The new APIs are not backwards-compatible, but we feel that
this is made up for by the much simpler way of registering services on
node.Node. You can find more information and rationale in the design
document: https://gist.github.com/renaynay/5bec2de19fde66f4d04c535fd24f0775.
There is also a new feature in Node's Go API: it is now possible to
register arbitrary handlers on the user-facing HTTP server. In geth, this
facility is used to enable GraphQL.
There is a single minor change relevant for geth users in this PR: The
GraphQL API is no longer available separately from the JSON-RPC HTTP
server. If you want GraphQL, you need to enable it using the
./geth --http --graphql flag combination.
The --graphql.port and --graphql.addr flags are no longer available.
This PR reimplements the light client server pool. It is also a first step
to move certain logic into a new lespay package. This package will contain
the implementation of the lespay token sale functions, the token buying and
selling logic and other components related to peer selection/prioritization
and service quality evaluation. Over the long term this package will be
reusable for incentivizing future protocols.
Since the LES peer logic is now based on enode.Iterator, it can now use
DNS-based fallback discovery to find servers.
This document describes the function of the new components:
https://gist.github.com/zsfelfoldi/3c7ace895234b7b345ab4f71dab102d4
* cmd, core, eth: init tx lookup in background
* core/rawdb: tiny log fixes to make it clearer what's happening
* core, eth: fix rebase errors
* core/rawdb: make reindexing less generic, but more optimal
* rlp: implement rlp list iterator
* core/rawdb: new implementation of tx indexing/unindex using generic tx iterator and hashing rlp-data
* core/rawdb, cmd/utils: fix review concerns
* cmd/utils: fix merge issue
* core/rawdb: add some log formatting polishes
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
* eth: improve shutdown synchronization
Most goroutines started by eth.Ethereum didn't have any shutdown sync at
all, which lead to weird error messages when quitting the client.
This change improves the clean shutdown path by stopping all internal
components in dependency order and waiting for them to actually be
stopped before shutdown is considered done. In particular, we now stop
everything related to peers before stopping 'resident' parts such as
core.BlockChain.
* eth: rewrite sync controller
* eth: remove sync start debug message
* eth: notify chainSyncer about new peers after handshake
* eth: move downloader.Cancel call into chainSyncer
* eth: make post-sync block broadcast synchronous
* eth: add comments
* core: change blockchain stop message
* eth: change closeBloomHandler channel type
* node: expose config in service context
* eth: integrate p2p/dnsdisc
* cmd/geth: add some DNS flags
* eth: remove DNS URLs
* cmd/utils: configure DNS names for testnets
* params: update DNS URLs
* cmd/geth: configure mainnet DNS
* cmd/utils: rename DNS flag and fix flag processing
* cmd/utils: remove debug print
* node: fix test
* eth: chain config (genesis + fork) ENR entry
* core/forkid, eth: protocol independent fork ID, update to CRC32 spec
* core/forkid, eth: make forkid a struct, next uint64, enr struct, RLP
* core/forkid: change forkhash rlp encoding from int to [4]byte
* eth: fixup eth entry a bit and update it every block
* eth: fix lint
* eth: fix crash in ethclient tests
* core, eth, trie: bloom filter for trie node dedup during fast sync
* eth/downloader, trie: address review comments
* core, ethdb, trie: restart fast-sync bloom construction now and again
* eth/downloader: initialize fast sync bloom on startup
* eth: reenable eth/62 until we properly remove it
* cmd, eth, miner: disable advance sealing if user require
* cmd, console, miner, les, eth: wrap the miner config
* eth: remove todo
* cmd, miner: revert noadvance flag
The reason for this is: if the transaction execution is even longer
than block time, then this kind of transactions is DoS attack.
This change
- implements concurrent LES request serving even for a single peer.
- replaces the request cost estimation method with a cost table based on
benchmarks which gives much more consistent results. Until now the
allowed number of light peers was just a guess which probably contributed
a lot to the fluctuating quality of available service. Everything related
to request cost is implemented in a single object, the 'cost tracker'. It
uses a fixed cost table with a global 'correction factor'. Benchmark code
is included and can be run at any time to adapt costs to low-level
implementation changes.
- reimplements flowcontrol.ClientManager in a cleaner and more efficient
way, with added capabilities: There is now control over bandwidth, which
allows using the flow control parameters for client prioritization.
Target utilization over 100 percent is now supported to model concurrent
request processing. Total serving bandwidth is reduced during block
processing to prevent database contention.
- implements an RPC API for the LES servers allowing server operators to
assign priority bandwidth to certain clients and change prioritized
status even while the client is connected. The new API is meant for
cases where server operators charge for LES using an off-protocol mechanism.
- adds a unit test for the new client manager.
- adds an end-to-end test using the network simulator that tests bandwidth
control functions through the new API.
* geth/core/eth: implement constantinople override flag
* les: implemnent constantinople override flag for les clients
* cmd/geth, eth, les: fix typo, move flag to experimentals
* Rejects peers that respond with a different hash for any of the passed in block numbers.
* Meant for emergency situations when the network forks unexpectedly.
Interpreter initialization is left to the PRs implementing them.
Options for external interpreters are passed after a colon in the
`--vm.ewasm` and `--vm.evm` switches.
This PR enables the indexers to work in light client mode by
downloading a part of these tries (the Merkle proofs of the last
values of the last known section) in order to be able to add new
values and recalculate subsequent hashes. It also adds CHT data to
NodeInfo.
* consensus/ethash: start remote ggoroutine to handle remote mining
* consensus/ethash: expose remote miner api
* consensus/ethash: expose submitHashrate api
* miner, ethash: push empty block to sealer without waiting execution
* consensus, internal: add getHashrate API for ethash
* consensus: add three method for consensus interface
* miner: expose consensus engine running status to miner
* eth, miner: specify etherbase when miner created
* miner: commit new work when consensus engine is started
* consensus, miner: fix some logics
* all: delete useless interfaces
* consensus: polish a bit
* cmd, consensus, eth: split ethash related config to it own
* eth, consensus: minor polish
* eth, consenus, console: compress pow testing config field to single one
* consensus, eth: document pow mode
This PR implements the new LES protocol version extensions:
* new and more efficient Merkle proofs reply format (when replying to
a multiple Merkle proofs request, we just send a single set of trie
nodes containing all necessary nodes)
* BBT (BloomBitsTrie) works similarly to the existing CHT and contains
the bloombits search data to speed up log searches
* GetTxStatusMsg returns the inclusion position or the
pending/queued/unknown state of a transaction referenced by hash
* an optional signature of new block data (number/hash/td) can be
included in AnnounceMsg to provide an option for "very light
clients" (mobile/embedded devices) to skip expensive Ethash check
and accept multiple signatures of somewhat trusted servers (still a
lot better than trusting a single server completely and retrieving
everything through RPC). The new client mode is not implemented in
this PR, just the protocol extension.
* core: reduce txpool event loop goroutines and sync structs
* cmd, core, eth: journal local transactions to disk
* core: journal replacement pending transactions too
* core: separate transaction journal from pool
* core: remove redundant storage of transactions and receipts
* core, eth, internal: new transaction schema usage polishes
* eth: implement upgrade mechanism for db deduplication
* core, eth: drop old sequential key db upgrader
* eth: close last iterator on successful db upgrage
* core: prefix the lookup entries to make their purpose clearer
Currently http cors and websocket origins are a comma separated string in the
config object. These are replaced with string arrays that are more expressive in
case of a config file.
* p2p/discover, p2p/discv5: add marshaling methods to Node
* p2p/netutil: make Netlist decodable from TOML
* common/math: encode nil HexOrDecimal256 as 0x0
* cmd/geth: add --config file flag
* cmd/geth: add missing license header
* eth: prettify Config again, fix tests
* eth: use gasprice.Config instead of duplicating its fields
* eth/gasprice: hide nil default from dumpconfig output
* cmd/geth: hide genesis block in dumpconfig output
* node: make tests compile
* console: fix tests
* cmd/geth: make TOML keys look exactly like Go struct fields
* p2p: use discovery by default
This makes the zero Config slightly more useful. It also fixes package
node tests because Node detects reuse of the datadir through the
NodeDatabase.
* cmd/geth: make ethstats URL settable through config file
* cmd/faucet: fix configuration
* cmd/geth: dedup attach tests
* eth: add comment for DefaultConfig
* eth: pass downloader.SyncMode in Config
This removes the FastSync, LightSync flags in favour of a more
general SyncMode flag.
* cmd/utils: remove jitvm flags
* cmd/utils: make mutually exclusive flag error prettier
It now reads:
Fatal: flags --dev, --testnet can't be used at the same time
* p2p: fix typo
* node: add DefaultConfig, use it for geth
* mobile: add missing NoDiscovery option
* cmd/utils: drop MakeNode
This exposed a couple of places that needed to be updated to use
node.DefaultConfig.
* node: fix typo
* eth: make fast sync the default mode
* cmd/utils: remove IPCApiFlag (unused)
* node: remove default IPC path
Set it in the frontends instead.
* cmd/geth: add --syncmode
* cmd/utils: make --ipcdisable and --ipcpath mutually exclusive
* cmd/utils: don't enable WS, HTTP when setting addr
* cmd/utils: fix --identity
