This PR changes geth to read the eip1559 params from the chain config instead of the globals.
This way the parameters may be changed by forking the chain config code, without creating a large diff throughout the past and future usages of the parameters.
Co-authored-by: Martin Holst Swende <martin@swende.se>
* feature: do trie prefetch on state prefetch
Currently, state prefetch just pre execute the transactions and discard the results.
It is helpful to increase the snapshot cache hit rate.
It would be more helpful, if it can do trie prefetch at the same time, since the it will
preload the trie node and build the trie tree in advance.
This patch is to implement it, by reusing the main trie prefetch and doing finalize after
transaction is executed.
* some code improvements for trie prefetch
** increase pendingSize before dispatch tasks
** use throwaway StateDB for TriePrefetchInAdvance and remove the prefetcherLock
** remove the necessary drain operation in trie prefetch mainloop,
trie prefetcher won't be used after close.
* eth/catalyst: build the execution payload async
* miner: added comment, added test case
* eth/catalyst: miner: move async block production to miner
* eth/catalyst, miner: support generate seal block async
* miner: rework GetSealingBlockAsync to use a passed channel
* miner: apply rjl's diff
* eth/catalyst: nitpicks
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
During mining, when a new head arrives and interrupts the block building, the block being built should not be commited (but discarded). Committing the interrupted block introduces unnecessary delay, and possibly causes miner to mine on the previous head, which could result in higher uncle rate.
* eth, miner: remove duplicated code
* eth/catalyst: remove unneeded code
* miner: keep update pending state even the Merge is happened
* eth, miner: rebase
* miner: fix tests
* eth, miner: address comments from marius
* miner: use empty zero randomness for pending blocks after the merge
* eth/catalyst: gofmt
* miner: add warning log for state recovery
* miner: ignore uncles for post-merge blocks
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
* all: work for eth1/2 transtition
* consensus/beacon, eth: change beacon difficulty to 0
* eth: updates
* all: add terminalBlockDifficulty config, fix rebasing issues
* eth: implemented merge interop spec
* internal/ethapi: update to v1.0.0.alpha.2
This commit updates the code to the new spec, moving payloadId into
it's own object. It also fixes an issue with finalizing an empty blockhash.
It also properly sets the basefee
* all: sync polishes, other fixes + refactors
* core, eth: correct semantics for LeavePoW, EnterPoS
* core: fixed rebasing artifacts
* core: light: performance improvements
* core: use keyed field (f)
* core: eth: fix compilation issues + tests
* eth/catalyst: dbetter error codes
* all: move Merger to consensus/, remove reliance on it in bc
* all: renamed EnterPoS and LeavePoW to ReachTDD and FinalizePoS
* core: make mergelogs a function
* core: use InsertChain instead of InsertBlock
* les: drop merger from lightchain object
* consensus: add merger
* core: recoverAncestors in catalyst mode
* core: fix nitpick
* all: removed merger from beacon, use TTD, nitpicks
* consensus: eth: add docstring, removed unnecessary code duplication
* consensus/beacon: better comment
* all: easy to fix nitpicks by karalabe
* consensus/beacon: verify known headers to be sure
* core: comments
* core: eth: don't drop peers who advertise blocks, nitpicks
* core: never add beacon blocks to the future queue
* core: fixed nitpicks
* consensus/beacon: simplify IsTTDReached check
* consensus/beacon: correct IsTTDReached check
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
This PR fixes a problem which arises on clique networks when there is a network stall. Previously, the worker packages were tracked, even if the sealing engine decided not to seal the block (due to clique rules about recent signing). These tracked-but-not-sealed blocks kept building up in memory.
This PR changes the situation so the sealing engine instead returns an error, and the worker can thus un-track the package.
This fixes a data race on worker.current by moving the call to StopPrefetcher
into the main loop.
The commit also contains fixes for two other races in unit tests of unrelated packages.
* core/types, miner: create TxWithMinerFee wrapper, add EIP-1559 support to TransactionsByMinerFeeAndNonce
miner: set base fee when creating a new header, handle gas limit, log miner fees
* all: rename to NewTransactionsByPriceAndNonce
* core/types, miner: rename to NewTransactionsByPriceAndNonce + EffectiveTip
miner: activate 1559 for testGenerateBlockAndImport tests
* core,miner: revert naming to TransactionsByPriceAndTime
* core/types/transaction: update effective tip calculation logic
* miner: update aleut to london
* core/types/transaction_test: use correct signer for 1559 txs + add back sender check
* miner/worker: calculate gas target from gas limit
* core, miner: fix block gas limits for 1559
Co-authored-by: Ansgar Dietrichs <adietrichs@gmail.com>
Co-authored-by: lightclient@protonmail.com <lightclient@protonmail.com>
This adds support for EIP-2718 typed transactions as well as EIP-2930
access list transactions (tx type 1). These EIPs are scheduled for the
Berlin fork.
There very few changes to existing APIs in core/types, and several new APIs
to deal with access list transactions. In particular, there are two new
constructor functions for transactions: types.NewTx and types.SignNewTx.
Since the canonical encoding of typed transactions is not RLP-compatible,
Transaction now has new methods for encoding and decoding: MarshalBinary
and UnmarshalBinary.
The existing EIP-155 signer does not support the new transaction types.
All code dealing with transaction signatures should be updated to use the
newer EIP-2930 signer. To make this easier for future updates, we have
added new constructor functions for types.Signer: types.LatestSigner and
types.LatestSignerForChainID.
This change also adds support for the YoloV3 testnet.
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Felix Lange <fjl@twurst.com>
Co-authored-by: Ryan Schneider <ryanleeschneider@gmail.com>
The PR makes use of the stacktrie, which is is more lenient on resource consumption, than the regular trie, in cases where we only need it for DeriveSha
This PR removes a logic in the miner, which was originally intended to help temporary testnets based on ethash from "running off into the future". If the difficulty was low, and a few computers started mining several blocks per second, the ethash rules (which demand 1s delay between blocks) would push the blocktimes further and further away.
The solution was to make the miner sleep while this happened.
Nowadays, this problem is solved instead by PoA chains, and it's recommended to let testnets and devnets be based on clique instead. The existing logic is problematic, since it can cause stalls within the miner making it difficult for remote workers to submit work if the channel is blocked on a sleep.
Credits to Saar Tochner for reporting this via the bug bounty
In miner/worker.go, there are two goroutine using channel w.newWorkCh: newWorkerLoop() sends to this channel, and mainLoop() receives from this channel. Only the receive operation is in a select.
However, w.exitCh may be closed by another goroutine. This is fine for the receive since receive is in select, but if the send operation is blocking, then it will block forever. This commit puts the send in a select, so it won't block even if w.exitCh is closed.
Similarly, there are two goroutines using channel errc: the parent that runs the test receives from it, and the child created at line 573 sends to it. If the parent goroutine exits too early by calling t.Fatalf() at line 614, then the child goroutine will be blocked at line 574 forever. This commit adds 1 buffer to errc. Now send will not block, and receive is not influenced because receive still needs to wait for the send.
A lot of times when we hit 'core' errors, example: invalid tx, the information provided is
insufficient. We miss several pieces of information: what account has nonce too high,
and what transaction in that block was offending?
This PR adds that information, using the new type of wrapped errors.
It also adds a testcase which (partly) verifies the output from the errors.
The first commit changes all usage of direct equality-checks on core errors, into
using errors.Is. The second commit adds contextual information. This wraps most
of the core errors with more information, and also wraps it one more time in
stateprocessor, to further provide tx index and tx hash, if such a tx is encoutered in
a block. The third commit uses the chainmaker to try to generate chains with such
errors in them, thus triggering the errors and checking that the generated string meets
expectations.
This PR changes several different things:
- Adds test cases for the miner loop
- Stops the worker if it wasn't already stopped in worker.Close()
- Uses channels instead of atomics in the miner.update() loop
Co-authored-by: Felix Lange <fjl@twurst.com>
* cmd, miner: add noempty-precommit flag
* cmd, miner: get rid of external flag
* miner: change bool to atomic int
* miner: fix tiny typo
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
This change:
- removes the PostChainEvents method on core.BlockChain.
- sorts 'removed log' events by block number.
- fire the NewChainHead event if we inject a canonical block into the chain
even if the entire insertion is not successful.
- guarantees correct event ordering in all cases.
* cmd, eth, miner: disable advance sealing if user require
* cmd, console, miner, les, eth: wrap the miner config
* eth: remove todo
* cmd, miner: revert noadvance flag
The reason for this is: if the transaction execution is even longer
than block time, then this kind of transactions is DoS attack.
Until this commit, when sending an RPC request that called `NewEVM`, a blank `vm.Config`
would be taken so as to set some options, based on the default configuration. If some extra
configuration switches were passed to the blockchain, those would be ignored.
This PR adds a function to get the config from the blockchain, and this is what is now used
for RPC calls.
Some subsequent changes need to be made, see https://github.com/ethereum/go-ethereum/pull/17955#pullrequestreview-182237244
for the details of the discussion.
* miner: commit state which is relative with sealing result
* consensus, core, miner, mobile: introduce sealHash interface
* miner: evict pending task with threshold
* miner: go fmt
* consensus/ethash: start remote ggoroutine to handle remote mining
* consensus/ethash: expose remote miner api
* consensus/ethash: expose submitHashrate api
* miner, ethash: push empty block to sealer without waiting execution
* consensus, internal: add getHashrate API for ethash
* consensus: add three method for consensus interface
* miner: expose consensus engine running status to miner
* eth, miner: specify etherbase when miner created
* miner: commit new work when consensus engine is started
* consensus, miner: fix some logics
* all: delete useless interfaces
* consensus: polish a bit
* cmd, consensus, core, miner: instatx clique for --dev
* cmd, consensus, clique: support configurable --dev block times
* cmd, core: allow --dev to use persistent storage too
* ethdb: add Putter interface and Has method
* ethdb: improve docs and add IdealBatchSize
* ethdb: remove memory batch lock
Batches are not safe for concurrent use.
* core: use ethdb.Putter for Write* functions
This covers the easy cases.
* core/state: simplify StateSync
* trie: optimize local node check
* ethdb: add ValueSize to Batch
* core: optimize HasHeader check
This avoids one random database read get the block number. For many uses
of HasHeader, the expectation is that it's actually there. Using Has
avoids a load + decode of the value.
* core: write fast sync block data in batches
Collect writes into batches up to the ideal size instead of issuing many
small, concurrent writes.
* eth/downloader: commit larger state batches
Collect nodes into a batch up to the ideal size instead of committing
whenever a node is received.
* core: optimize HasBlock check
This avoids a random database read to get the number.
* core: use numberCache in HasHeader
numberCache has higher capacity, increasing the odds of finding the
header without a database lookup.
* core: write imported block data using a batch
Restore batch writes of state and add blocks, tx entries, receipts to
the same batch. The change also simplifies the miner.
This commit also removes posting of logs when a forked block is imported.
* core: fix DB write error handling
* ethdb: use RLock for Has
* core: fix HasBlock comment
