This removes auto-configuration of the snap.*.ethdisco.net DNS discovery tree.
Since measurements have shown that > 75% of nodes in all.*.ethdisco.net support
snap, we have decided to retire the dedicated index for snap and just use the eth
tree instead.
The dial iterators of eth and snap now use the same DNS tree in the default configuration,
so both iterators should use the same DNS discovery client instance. This ensures that
the record cache and rate limit are shared. Records will not be requested multiple times.
While testing the change, I noticed that duplicate DNS requests do happen even
when the client instance is shared. This is because the two iterators request the tree
root, link tree root, and first levels of the tree in lockstep. To avoid this problem, the
change also adds a singleflight.Group instance in the client. When one iterator
attempts to resolve an entry which is already being resolved, the singleflight object
waits for the existing resolve call to finish and returns the entry to both places.
The new -limit option makes the filter operate on top N nodes by score.
This also adds ENR attribute stats in the nodeset info command.
Node set commands are now documented in README.
This change adds the --catalyst flag, enabling an RPC API for eth2 integration.
In this initial version, catalyst mode also disables all peer-to-peer networking.
Co-authored-by: Mikhail Kalinin <noblesse.knight@gmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
* all: add thousandths separators for big numbers on log messages
* p2p/sentry: drop accidental file
* common, log: add fast number formatter
* common, eth/protocols/snap: simplifty fancy num types
* log: handle nil big ints
This upgrades the cloudflare client dependency to v0.14.0. The new
version changes the API because all methods now require a context
parameter. This change also reduces the log level of the 'Skipping...'
message to debug, following a similar change in the AWS deployer.
The PR implements the --miner.notify.full flag that enables full pending block
notifications. When this flag is used, the block notifications sent to mining
endpoints contain the complete block header JSON instead of a work package
array.
Co-authored-by: AlexSSD7 <alexandersadovskyi7@protonmail.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
* cmd/devp2p: fix comparison of TXT record value
The AWS API returns quoted DNS strings, so we must encode the new value
before comparing it against the existing record content.
* cmd/devp2p: add test
* cmd/devp2p: fix typo and rename val -> newValue
In Geth v1.10, we changed the structure of the "les" ENR entry. As a result, the DHT crawler that creates the DNS lists
no longer recognizes the les nodes, which is fixed in this commit.
* cmd/devp2p: skip ENR field tails properly in nodeset filter
* cmd/devp2p: fix tail decoder for snap as well
* les: fix tail decoding in "eth" ENR entry
This PR fixes a regression introduced in #22360, when we updated to the v2 of the AWS sdk, which causes current crawler to just get the same first 100 results over and over, and get stuck in a loop.
This updates the DNS deployer to use AWS SDK v2. Migration is relatively
seamless, although there were two locations that required a slightly
different approach to achieve the same results. In particular, waiting for
DNS change propagation is very different with SDK v2.
This change also optimizes DNS updates by publishing all changes before
waiting for propagation.
This PR fixes an issue with the eth66 test suite where, during a readAndServe when
the test is manually responding to GetBlockHeader requests, it now responds
with a BlockHeaders eth66 packet that includes the inbound request ID.
This replaces the github.com/pborman/uuid dependency with
github.com/google/uuid because the former is only a wrapper for
the latter (since v1.0.0).
Co-authored-by: Felix Lange <fjl@twurst.com>
This adds support for EIP-2718 typed transactions as well as EIP-2930
access list transactions (tx type 1). These EIPs are scheduled for the
Berlin fork.
There very few changes to existing APIs in core/types, and several new APIs
to deal with access list transactions. In particular, there are two new
constructor functions for transactions: types.NewTx and types.SignNewTx.
Since the canonical encoding of typed transactions is not RLP-compatible,
Transaction now has new methods for encoding and decoding: MarshalBinary
and UnmarshalBinary.
The existing EIP-155 signer does not support the new transaction types.
All code dealing with transaction signatures should be updated to use the
newer EIP-2930 signer. To make this easier for future updates, we have
added new constructor functions for types.Signer: types.LatestSigner and
types.LatestSignerForChainID.
This change also adds support for the YoloV3 testnet.
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Felix Lange <fjl@twurst.com>
Co-authored-by: Ryan Schneider <ryanleeschneider@gmail.com>
This PR adds a more CLI flag, so that the les-server can serve light clients even the local node is not synced yet.
This functionality is needed in some testing environments(e.g. hive). After launching the les server, no more blocks will be imported so the node is always marked as "non-synced".
This PR prevents users from submitting transactions without EIP-155 enabled. This behaviour can be overridden by specifying the flag --rpc.allow-unprotected-txs=true.
This PR introduces:
- db.put to put a value into the database
- db.get to read a value from the database
- db.delete to delete a value from the database
- db.stats to check compaction info from the database
- db.compact to trigger a db compaction
It also moves inspectdb to db.inspect.
This moves the eth config definition into a separate package, eth/ethconfig.
Packages eth and les can now import this common package instead of
importing eth from les, reducing dependencies.
Co-authored-by: Felix Lange <fjl@twurst.com>
The PR makes use of the stacktrie, which is is more lenient on resource consumption, than the regular trie, in cases where we only need it for DeriveSha
* remove uneeded convertion type
* remove redundant type in composite literal
* omit explicit type where implicit
* remove unused redundant parenthesis
* remove redundant import alias duktape
This change allows users to set a custom path prefix on which to mount the http-rpc
or ws-rpc handlers via the new flags --http.rpcprefix and --ws.rpcprefix.
Fixes#21826
Co-authored-by: Felix Lange <fjl@twurst.com>
Removes the yolov2 definition, adds yolov3, including EIP-2565. This PR also disables some of the erroneously generated blockchain and statetests, and adds the new genesis hash + alloc for yolov3.
This PR disables the CLI switches for yolo, since it's not complete until we merge support for 2930.
This PR enables running the new discv5 protocol in both LES client
and server mode. In client mode it mixes discv5 and dnsdisc iterators
(if both are enabled) and filters incoming ENRs for "les" tag and fork ID.
The old p2p/discv5 package and all references to it are removed.
Co-authored-by: Felix Lange <fjl@twurst.com>
This moves the tracing RPC API implementation to package eth/tracers.
By doing so, package eth no longer depends on tracing and the duktape JS engine.
The change also enables tracing using the light client. All tracing methods work with the
light client, but it's a lot slower compared to using a full node.
Adding warnings of free disk space left and graceful shutdown when there is not enough space left.
This also adds a flag datadir.minfreedisk which can be used to set the trigger for low disk space, and setting it to zero disables the check.
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Felix Lange <fjl@twurst.com>
USB enumeration still occured. Make sure it will only occur if --usb is set.
This also deprecates the 'NoUSB' config file option in favor of a new option 'USB'.
Resolves https://github.com/etclabscore/core-geth/issues/273
jsre.JSRE already handles establishing preload
file paths relative to the 'assets' path (aka docroot),
where it joins the assets dir and the file path if relative,
or uses the file path only if absolute.
The duplication of this logic by MakeConsolePreloads
caused preloaded files to have paths which contained
duplicate references to the assets dir path.
Date: 2020-12-30 08:25:01-06:00
Signed-off-by: meows <b5c6@protonmail.com>
* les: allow tx unindexing in les/4 light server mode
* les: minor fixes
* les: more small fixes
* les: add meaningful constants for recentTxIndex handshake field
This commit splits the eth package, separating the handling of eth and snap protocols. It also includes the capability to run snap sync (https://github.com/ethereum/devp2p/blob/master/caps/snap.md) , but does not enable it by default.
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Co-authored-by: Martin Holst Swende <martin@swende.se>
* doc: clarify abigen alias flag usage
update the `abigen --alias` flag help info, give an example to make it more clear
related issue: https://github.com/ethereum/go-ethereum/issues/21846
* Update cmd/abigen/main.go
Co-authored-by: ligi <ligi@ligi.de>
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: ligi <ligi@ligi.de>
This PR adds support for using Twitter API to query the tweet and author details. There are two reasons behind this change:
- Twitter will be deprecating the legacy website on 15th December. The current method is expected to stop working then.
- More importantly, the current system uses Twitter handle for spam protection but the Twitter handle can be changed via automated calls. This allows bots to use the same tweet to withdraw funds infinite times as long as they keep changing their handle between every request. The Rinkeby as well as the Goerli faucet are being actively drained via this method. This PR changes the spam protection to be based on Twitter IDs instead of usernames. A user can not change their Twitter ID.
* cmd/geth: implement vulnerability check
* cmd/geth: use minisign to verify vulnerability feed
* cmd/geth: add the test too
* cmd/geth: more minisig/signify testing
* cmd/geth: support multiple pubfiles for signing
* cmd/geth: add @holiman minisig pubkey
* cmd/geth: polishes on vulnerability check
* cmd/geth: fix ineffassign linter nit
* cmd/geth: add CVE to version check struct
* cmd/geth/testdata: add missing testfile
* cmd/geth: add more keys to versionchecker
* cmd/geth: support file:// URLs in version check
* cmd/geth: improve key ID printing when signature check fails
Co-authored-by: Felix Lange <fjl@twurst.com>
* trie: fix tests to work on 32-bit systems
* les: make test work on 32-bit platform
* cmd/geth: fix windows-issues on tests
* trie: improve balance
* cmd/geth: make account tests less verbose + less mem intense
* rpc: make debug-level log output less verbose
* cmd/geth: lint
* all: core: split vm.Config into BlockConfig and TxConfig
* core: core/vm: reset EVM between tx in block instead of creating new
* core/vm: added docs
This PR replaces the old test genesis.json and chain.rlp files in the testdata
directory for the eth protocol test suite, and also adds documentation for
running the eth test suite locally.
It also improves the test output text and adds more timeouts.
Co-authored-by: Felix Lange <fjl@twurst.com>
TAP is a text format for test results. Parsers for it are available in many languages,
making it easy to consume. I want TAP output from our protocol tests because the
Hive wrapper around them needs to know about the test names and their individual
results and logs. It would also be possible to just write this info as JSON, but I don't
want to invent a new format.
This also improves the normal console output for tests (when running without --tap).
It now prints -- RUN lines before any output from the test, and indents the log output
by one space.
The old one was wrong in two ways: the first block in chain.rlp was the
genesis block, and the genesis difficulty was below minimum difficulty.
This also contains some other fixes to the test.
* accounts, signer: implement gnosis safe support
* common/math: add type for marshalling big to dec
* accounts, signer: properly sign gnosis requests
* signer, clef: implement account_signGnosisTx
* signer: fix auditlog print, change rpc-name (signGnosisTx to signGnosisSafeTx)
* signer: pass validation-messages/warnings to the UI for gnonsis-safe txs
* signer/core: minor change to validationmessages of typed data
This change moves the RLPx protocol implementation into a separate package,
p2p/rlpx. The new package can be used to establish RLPx connections for
protocol testing purposes.
Co-authored-by: Felix Lange <fjl@twurst.com>
* whisper: remove whisper
* Update cmd/geth/config.go
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
* cmd/geth: warn on enabling whisper + remove more whisper deps
* mobile: remove all whisper references
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Co-authored-by: Martin Holst Swende <martin@swende.se>
* chaincmd should make config nodes instead of full nodes
* add documentation for using makeConfigNode instead of makeFullNode;
* add documentation to functions
* code style
This PR significantly changes the APIs for instantiating Ethereum nodes in
a Go program. The new APIs are not backwards-compatible, but we feel that
this is made up for by the much simpler way of registering services on
node.Node. You can find more information and rationale in the design
document: https://gist.github.com/renaynay/5bec2de19fde66f4d04c535fd24f0775.
There is also a new feature in Node's Go API: it is now possible to
register arbitrary handlers on the user-facing HTTP server. In geth, this
facility is used to enable GraphQL.
There is a single minor change relevant for geth users in this PR: The
GraphQL API is no longer available separately from the JSON-RPC HTTP
server. If you want GraphQL, you need to enable it using the
./geth --http --graphql flag combination.
The --graphql.port and --graphql.addr flags are no longer available.
* geth,utils: implement configurable developer account options
Prior to this change --dev (developer) mode
generated one account with an empty password,
irrespective of existing --password and --miner.etherbase
options.
This change makes --dev mode compatible with these
existing flags.
--dev mode may now be used in conjunction with
--password and --miner.etherbase flags to configure
the developer faucet using an existing keystore or
in creating a new account.
Signed-off-by: meows <b5c6@protonmail.com>
* main: remove key/pass flags from usage developer section
These flags are included already in other sections,
and it is not desired to duplicate them.
They were originally included in this section
along with added support for these flags in the
developer mode.
Signed-off-by: meows <b5c6@protonmail.com>
This change introduces garbage collection for the light client. Historical
chain data is deleted periodically. If you want to disable the GC, use
the --light.nopruning flag.
This adds a test suite for discovery v4. The test suite is a port of the Hive suite for
discovery, and will replace the current suite on Hive soon-ish. The tests can be
run locally with this command:
devp2p discv4 test -remote enode//...
Co-authored-by: Felix Lange <fjl@twurst.com>
Exposing /debug/metrics and /debug/metrics/prometheus was dependent
on --pprof, which also exposes other HTTP APIs. This change makes it possible
to run the metrics server on an independent endpoint without enabling pprof.
This PR reduces the bandwidth used by the light client to compute the
recommended gas price. The current mechanism for suggesting the price is:
- retrieve recent 20 blocks
- get the lowest gas price of these blocks
- sort the price array and return the middle(60%) one
This works for full nodes, which have all blocks available locally.
However, this is very expensive for the light client because the light
client needs to retrieve block bodies from the network.
The PR changes the default options for light client. With the new config,
the light client only retrieves the two latest blocks, but in order to
collect more sample transactions, the 3 lowest prices are collected from
each block.
This PR also changes the behavior for empty blocks. If the block is empty,
the lastest price is reused for sampling.
This PR implements the EVM state transition tool, which is intended
to be the replacement for our retesteth client implementation.
Documentation is present in the cmd/evm/README.md file.
Co-authored-by: Felix Lange <fjl@twurst.com>
Without use of global, these flags didn't actually modify
miner configuration, since we weren't grabbing from the
proper context scope, which should be global (vs. subcommand).
Signed-off-by: meows <b5c6@protonmail.com>
The import command should not return a 0 status
code if the import finishes prematurely becaues
of an import error.
Returning the error causes the program to exit with 1
if the err is non nil.
Signed-off-by: meows <b5c6@protonmail.com>
* replace gosigar with gopsutil
* removed check for whether GOOS is openbsd
* removed accidental import of runtime
* potential fix for difference in units between gosig and gopsutil
* fixed lint error
* remove multiplication factor
* uses cpu.ClocksPerSec as the multiplication factor
* changed dependency from shirou to renaynay (#20)
* updated dep
* switching back from using renaynay fork to using upstream as PRs were merged on upstream
* removed empty line
* optimized imports
* tidied go mod
This PR reimplements the light client server pool. It is also a first step
to move certain logic into a new lespay package. This package will contain
the implementation of the lespay token sale functions, the token buying and
selling logic and other components related to peer selection/prioritization
and service quality evaluation. Over the long term this package will be
reusable for incentivizing future protocols.
Since the LES peer logic is now based on enode.Iterator, it can now use
DNS-based fallback discovery to find servers.
This document describes the function of the new components:
https://gist.github.com/zsfelfoldi/3c7ace895234b7b345ab4f71dab102d4
* cmd/clef, signer/core: use better terminal input for passwords, make it possible to avoid boot-up warning
* all: move commonly used prompter to isolated (small) package
* cmd/clef: Add new --acceptWarn to clef README
* cmd/clef: rename flag 'acceptWarn' to 'suppress-bootwarn'
Co-authored-by: ligi <ligi@ligi.de>
* cmd, core, eth: init tx lookup in background
* core/rawdb: tiny log fixes to make it clearer what's happening
* core, eth: fix rebase errors
* core/rawdb: make reindexing less generic, but more optimal
* rlp: implement rlp list iterator
* core/rawdb: new implementation of tx indexing/unindex using generic tx iterator and hashing rlp-data
* core/rawdb, cmd/utils: fix review concerns
* cmd/utils: fix merge issue
* core/rawdb: add some log formatting polishes
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
* rpc flags related to starting http server renamed to http
* old rpc flags aliased and still functional
* pprof flags fixed
* renames gpo related flags
* linted
* renamed rpc flags for consistency and clarity
* added warn logs
* added more warn logs for all deprecated flags for consistency
* moves legacy flags to separate file, hides older flags under show-deprecated-flags command
* legacy prefix and moved some more legacy flags to legacy file
* fixed circular import
* added docs
* fixed imports lint error
* added notes about when flags were deprecated
* cmd/utils: group flags by deprecation date + reorder by date,
* modified deprecated comments for consistency, added warn log for --rpc
* making sure deprecated flags are still functional
* show-deprecated-flags command cleaned up
* fixed lint errors
* corrected merge conflict
* IsSet --> GlobalIsSet
* uncategorized flags, if not deprecated, displayed under misc
Co-authored-by: Martin Holst Swende <martin@swende.se>
Rather than just closing the underlying network listener to stop our
HTTP servers, use the graceful shutdown procedure, waiting for any
in-process requests to finish.
* all: seperate consensus error and evm internal error
There are actually two types of error will be returned when
a tranaction/message call is executed: (a) consensus error
(b) evm internal error. The former should be converted to
a consensus issue, e.g. The sender doesn't enough asset to
purchase the gas it specifies. The latter is allowed since
evm itself is a blackbox and internal error is allowed to happen.
This PR emphasizes the difference by introducing a executionResult
structure. The evm error is embedded inside. So if any error
returned, it indicates consensus issue happens.
And also this PR improve the `EstimateGas` API to return the concrete
revert reason if the transaction always fails
* all: polish
* accounts/abi/bind/backends: add tests
* accounts/abi/bind/backends, internal: cleanup error message
* all: address comments
* core: fix lint
* accounts, core, eth, internal: address comments
* accounts, internal: resolve revert reason if possible
* accounts, internal: address comments
* cmd/utils: make goerli the default testnet
* cmd/geth: explicitly rename testnet to ropsten
* core: explicitly rename testnet to ropsten
* params: explicitly rename testnet to ropsten
* cmd: explicitly rename testnet to ropsten
* miner: explicitly rename testnet to ropsten
* mobile: allow for returning the goerli spec
* tests: explicitly rename testnet to ropsten
* docs: update readme to reflect changes to the default testnet
* mobile: allow for configuring goerli and rinkeby nodes
* cmd/geth: revert --testnet back to ropsten and mark as legacy
* cmd/util: mark --testnet flag as deprecated
* docs: update readme to properly reflect the 3 testnets
* cmd/utils: add an explicit deprecation warning on startup
* cmd/utils: swap goerli and ropsten in usage
* cmd/geth: swap goerli and ropsten in usage
* cmd/geth: if running a known preset, log it for convenience
* docs: improve readme on usage of ropsten's testnet datadir
* cmd/utils: check if legacy `testnet` datadir exists for ropsten
* cmd/geth: check for legacy testnet path in console command
* cmd/geth: use switch statement for complex conditions in main
* cmd/geth: move known preset log statement to the very top
* cmd/utils: create new ropsten configurations in the ropsten datadir
* cmd/utils: makedatadir should check for existing testnet dir
* cmd/geth: add legacy testnet flag to the copy db command
* cmd/geth: add legacy testnet flag to the inspect command
This improves error messages when the file is too short or too long.
Also rewrite the test for SaveECDSA because LoadECDSA has its own
test now.
Co-authored-by: Felix Lange <fjl@twurst.com>
This change makes it possible to run geth with JSON-RPC over HTTP and
WebSocket on the same TCP port. The default port for WebSocket
is still 8546.
geth --rpc --rpcport 8545 --ws --wsport 8545
This also removes a lot of deprecated API surface from package rpc.
The rpc package is now purely about serving JSON-RPC and no longer
provides a way to start an HTTP server.
This adds an implementation of the current discovery v5 spec.
There is full integration with cmd/devp2p and enode.Iterator in this
version. In theory we could enable the new protocol as a replacement of
discovery v4 at any time. In practice, there will likely be a few more
changes to the spec and implementation before this can happen.
- Dump stats also for --bench flag.
- From memory stats only show number and size of allocations. This is what `test -bench` shows. I doubt others like number of GC runs are any useful, but can be added if requested.
- Now the mem stats are for single execution in case of --bench.
Turns out the way RDATA limits work is documented after all,
I just didn't search right. The trick to make it work is to
count UPSERTs twice.
This also adds an additional check to ensure TTL changes are
applied on existing records.
* node: expose config in service context
* eth: integrate p2p/dnsdisc
* cmd/geth: add some DNS flags
* eth: remove DNS URLs
* cmd/utils: configure DNS names for testnets
* params: update DNS URLs
* cmd/geth: configure mainnet DNS
* cmd/utils: rename DNS flag and fix flag processing
* cmd/utils: remove debug print
* node: fix test
For longer records and subtree entries, the deployer created two
separate TXT records. This doesn't work as intended because the client
will receive the two records in arbitrary order. The fix is to encode
longer values as "string1""string2" instead of "string1", "string2".
This encoding creates a single record on AWS Route53.
Adds the 'geth dumpgenesis' command, which writes the configured
genesis in JSON format to stdout. This provides a way to generate the
data (structure and content) that can then be used with the 'geth init'
command.
This replaces the JavaScript interpreter used by the console with goja,
which is actively maintained and a lot faster than otto. Clef still uses otto
and eth/tracers still uses duktape, so we are currently dependent on three
different JS interpreters. We're looking to replace the remaining uses of otto
soon though.
* log: delete RotatingFileHandler
We added this for the dashboard, which is gone now. The
handler never really worked well and had data race and file
handling issues.
* internal/debug: remove unused RotatingFileHandler setup code
This change works around the 32k RDATA character limit per change
request and fixes several issues in the deployer which prevented it from
working for our production trees.
* p2p/dnsdisc: add support for enode.Iterator
This changes the dnsdisc.Client API to support the enode.Iterator
interface.
* p2p/dnsdisc: rate-limit DNS requests
* p2p/dnsdisc: preserve linked trees across root updates
This improves the way links are handled when the link root changes.
Previously, sync would simply remove all links from the current tree and
garbage-collect all unreachable trees before syncing the new list of
links.
This behavior isn't great in certain cases: Consider a structure where
trees A, B, and C reference each other and D links to A. If D's link
root changed, the sync code would first remove trees A, B and C, only to
re-sync them later when the link to A was found again.
The fix for this problem is to track the current set of links in each
clientTree and removing old links only AFTER all links are synced.
* p2p/dnsdisc: deflake iterator test
* cmd/devp2p: adapt dnsClient to new p2p/dnsdisc API
* p2p/dnsdisc: tiny comment fix
* build: use golangci-lint
This changes build/ci.go to download and run golangci-lint instead
of gometalinter.
* core/state: fix unnecessary conversion
* p2p/simulations: fix lock copying (found by go vet)
* signer/core: fix unnecessary conversions
* crypto/ecies: remove unused function cmpPublic
* core/rawdb: remove unused function print
* core/state: remove unused function xTestFuzzCutter
* core/vm: disable TestWriteExpectedValues in a different way
* core/forkid: remove unused function checksum
* les: remove unused type proofsData
* cmd/utils: remove unused functions prefixedNames, prefixFor
* crypto/bn256: run goimports
* p2p/nat: fix goimports lint issue
* cmd/clef: avoid using unkeyed struct fields
* les: cancel context in testRequest
* rlp: delete unreachable code
* core: gofmt
* internal/build: simplify DownloadFile for Go 1.11 compatibility
* build: remove go test --short flag
* .travis.yml: disable build cache
* whisper/whisperv6: fix ineffectual assignment in TestWhisperIdentityManagement
* .golangci.yml: enable goconst and ineffassign linters
* build: print message when there are no lint issues
* internal/build: refactor download a bit
This removes the dashboard project. The dashboard was an experimental
browser UI for geth which displayed metrics and chain information in
real time. We are removing it because it has marginal utility and nobody
on the team can maintain it.
Removing the dashboard removes a lot of dependency code and shaves
6 MB off the geth binary size.
This adds all dashboard changes from the last couple months.
We're about to remove the dashboard, but decided that we should
get all the recent work in first in case anyone wants to pick up this
project later on.
* cmd, dashboard, eth, p2p: send peer info to the dashboard
* dashboard: update npm packages, improve UI, rebase
* dashboard, p2p: remove println, change doc
* cmd, dashboard, eth, p2p: cleanup after review
* dashboard: send current block to the dashboard client
In Geth, we have two sources for configuration:
(1) Config file
(2) Command line flag
Basically geth will first resolve config file and then overwrite
configs with command line flags.
This issue is: geth should only overwrite configs if flags are truly
set. So before we apply any flag to configs, `GlobalIsSet` check
is necessary.
This adds an implementation of node discovery via DNS TXT records to the
go-ethereum library. The implementation doesn't match EIP-1459 exactly,
the main difference being that this implementation uses separate merkle
trees for tree links and ENRs. The EIP will be updated to match p2p/dnsdisc.
To maintain DNS trees, cmd/devp2p provides a frontend for the p2p/dnsdisc
library. The new 'dns' subcommands can be used to create, sign and deploy DNS
discovery trees.
Most of these changes are related to the Go 1.13 changes to test binary
flag handling.
* cmd/geth: make attach tests more reliable
This makes the test wait for the endpoint to come up by polling
it instead of waiting for two seconds.
* tests: fix test binary flags for Go 1.13
Calling flag.Parse during package initialization is prohibited
as of Go 1.13 and causes test failures. Call it in TestMain instead.
* crypto/ecies: remove useless -dump flag in tests
* p2p/simulations: fix test binary flags for Go 1.13
Calling flag.Parse during package initialization is prohibited
as of Go 1.13 and causes test failures. Call it in TestMain instead.
* build: remove workaround for ./... vendor matching
This workaround was necessary for Go 1.8. The Go 1.9 release changed
the expansion rules to exclude vendored packages.
* Makefile: use relative path for GOBIN
This makes the "Run ./build/bin/..." line look nicer.
* les: fix test binary flags for Go 1.13
Calling flag.Parse during package initialization is prohibited
as of Go 1.13 and causes test failures. Call it in TestMain instead.
This copies cli.printHelp but changes minwidth to 38. Custom flag
code is improved to print the default value using cli.FlagStringer like
all built-in flags do.
* Ref #19906 - replace passPHRASE with passWORD in any user interactions
this skips doccomments and variablenames to minimize impact. It does
however include a rename of the `ethkey` `changepassphrase` parameter
* console: fix JavaScript error capitalization
* cmd/puppeth: integrate blockscout
* cmd/puppeth: expose debug namespace for blockscout
* cmd/puppeth: fix dbdir
* cmd/puppeth: run explorer in archive mode
* cmd/puppeth: ensure node is synced
* cmd/puppeth: fix explorer docker alignment + drop unneeded exec
* cmd/puppeth: polish up config saving and reloading
* cmd/puppeth: check both web and p2p port for explorer service
* accounts, abigen: link dependent libs in deploy
* abigen: add java generation
* bind: Fix unit tests
* abigen: add unit test
* Fix CI
* Post-rebase fixes
* Fix rebase issue
* accounts/abi: Gary's review feedback
* accounts/abi: More Gary feedback
* accounts/abi: minor fixes
* accounts/abi, cmd/abigen: support tuple
accounts/abi/bind, cmd/abigen: add objc back
accounts/abi/bind: use byte[24] as function indicator
accounts/abi/bind: resolve struct slice or array
accounts/abi/bind: remove sort logic
accounts: fix issues in abi
* accounts/abi: address comment
* accounts/abi/bind: Accept function ptr parameter
They are translated as [24]byte
* Add Java template version
* accounts/abi/bind: fix merge issue
* Fix CI
* core/state, cmd/geth: streaming json output dump cmd + optional code+storage
* dump: add option to continue even if preimages are missing
* core, evm: lint nits
* cmd: use local flags for dump, omit empty code/storage
* core/state: fix state dump test
* p2p/enr: add entries for for IPv4/IPv6 separation
This adds entry types for "ip6", "udp6", "tcp6" keys. The IP type stays
around because removing it would break a lot of code and force everyone
to care about the distinction.
* p2p/enode: track IPv4 and IPv6 address separately
LocalNode predicts the local node's UDP endpoint and updates the record.
This change makes it predict IPv4 and IPv6 endpoints separately since
they can now be in the record at the same time.
* p2p/enode: implement base64 text format
* all: switch to enode.Parse(...)
This allows passing base64-encoded node records to all the places that
previously accepted enode:// URLs. The URL format is still supported.
* cmd/bootnode, p2p: log node URL instead of ENR
...and return the base64 record in NodeInfo.
* p2p/discover: export Ping and RequestENR
These two are useful for checking the status of a node.
* cmd/devp2p: add devp2p debug tool
This is a new tool for debugging p2p issues. It supports a few
basic tasks for now, but many more things can and will be added
in the near future.
devp2p enrdump -- prints ENRs readably
devp2p discv4 ping -- checks if a node is up
devp2p discv4 requestenr -- gets a node's record
devp2p discv4 resolve -- finds a node through the DHT
* Add retesteth command
* Remove label and insert full version
* mineBlock - break the inner loop when the block is full
* Fixes for touched non-reward accounts, gas limit issues
* Not fail when SendTx has transaction with incorrect RLP
* Fix linter (unnecessary conversion)
* retesteth: add usage string to flag
* accounts/scwallet: Add a switch to enable smartcard support
* accounts: change the meaning of the switch
* disable card support in windows until tested
* only activate account if pcscd socket file is present
* the switch is now the path to the socket file
* accounts/scwallet: holiman's review feedback
* accounts/scwallet: send the path to go-pcsclite
* accounts/scwallet: add default, per platform path
* accounts/scwallet: fix error log warning
* accounts/scwallet: update pcsc lib to latest
* accounts/scwallet: use default path from pcsclite
* scwallet: forgot to change switch name
* cmd: minor style cleanups (error handling first, then happy path)
* core, eth: some fixes for freezer
* vendor, core/rawdb, cmd/geth: add db inspector
* core, cmd/utils: check ancient store path forceily
* cmd/geth, common, core/rawdb: a few fixes
* cmd/geth: support windows file rename and fix rename error
* core: support ancient plugin
* core, cmd: streaming file copy
* cmd, consensus, core, tests: keep genesis in leveldb
* core: write txlookup during ancient init
* core: bump database version
* core, eth, trie: bloom filter for trie node dedup during fast sync
* eth/downloader, trie: address review comments
* core, ethdb, trie: restart fast-sync bloom construction now and again
* eth/downloader: initialize fast sync bloom on startup
* eth: reenable eth/62 until we properly remove it
swarm/api: integrate tags to count chunks being split and stored
swarm/api/http: integrate tags in middleware for HTTP `POST` calls and assert chunks being calculated and counted correctly
swarm: remove deprecated and unused code, add swarm hash to DoneSplit signature, remove calls to the api client from the http package
cmd/swarm/swarm-smoke: improve smoke tests (#1337)
swarm/network: remove dead code (#1339)
swarm/network: remove FetchStore and SyncChunkStore in favor of NetStore (#1342)
* add-date-to unstable
* fields-insteadof-split
* internal/build: support building with missing git
* docker: add git history back to support commit date in version
* internal/build: use PR commits hashes for PR builds
* accounts: add note about backing up the keystore
* cmd, accounts: move the printout to accountCreate
* internal, signer: add info when new account is created via rpc
* cmd, internal, signer: split logs
* cmd/geth: make account new output a bit more verbose
* cmd, eth, miner: disable advance sealing if user require
* cmd, console, miner, les, eth: wrap the miner config
* eth: remove todo
* cmd, miner: revert noadvance flag
The reason for this is: if the transaction execution is even longer
than block time, then this kind of transactions is DoS attack.
* swarm/api: fix file descriptor leak in NewTestSwarmServer
Swarm storage (localstore) was not closed. That resulted a
"too many open files" error if `TestClientUploadDownloadRawEncrypted`
was run with `-count 1000`.
* cmd/swarm: speed up StartNewNodes() by parallelization
Reduce cluster startup time from 13s to 7s.
* swarm/api: disable flaky TestClientUploadDownloadRawEncrypted with -race
* swarm/storage: disable flaky TestLDBStoreCollectGarbage (-race)
With race detection turned on the disabled cases often fail with:
"ldbstore_test.go:535: expected surplus chunk 150 to be missing, but got no error"
* cmd/swarm: fix process leak in TestACT and TestSwarmUp
Each test run we start 3 nodes, but we did not terminate them. So
those 3 nodes continued eating up 1.2GB (3.4GB with -race) after test
completion.
6b6c4d1c2754f8dd70172ab58d7ee33cf9058c7d changed how we start clusters
to speed up tests. The changeset merged together test cases
and introduced a global cluster. But "forgot" about termination.
Let's get rid of "global cluster" so we have a clear owner of
termination (some time sacrifice), while leaving subtests to use the
same cluster.
This PR will will break existing UIs, since it changes all calls like ApproveSignTransaction to be on the form ui_approveSignTransaction.
This is to make it possible for the UI to reuse the json-rpc library from go-ethereum, which uses this convention.
Also, this PR removes some unused structs, after import/export were removed from the external api (so no longer needs internal methods for approval)
One more breaking change is introduced, removing passwords from the ApproveSignTxResponse and the likes. This makes the manual interface more like the rulebased interface, and integrates nicely with the credential storage. Thus, the way it worked before, it would be tempting for the UI to implement 'remember password' functionality. The way it is now, it will be easy instead to tell clef to store passwords and use them.
If a pw is not found in the credential store, the user is prompted to provide the password.
This change
- implements concurrent LES request serving even for a single peer.
- replaces the request cost estimation method with a cost table based on
benchmarks which gives much more consistent results. Until now the
allowed number of light peers was just a guess which probably contributed
a lot to the fluctuating quality of available service. Everything related
to request cost is implemented in a single object, the 'cost tracker'. It
uses a fixed cost table with a global 'correction factor'. Benchmark code
is included and can be run at any time to adapt costs to low-level
implementation changes.
- reimplements flowcontrol.ClientManager in a cleaner and more efficient
way, with added capabilities: There is now control over bandwidth, which
allows using the flow control parameters for client prioritization.
Target utilization over 100 percent is now supported to model concurrent
request processing. Total serving bandwidth is reduced during block
processing to prevent database contention.
- implements an RPC API for the LES servers allowing server operators to
assign priority bandwidth to certain clients and change prioritized
status even while the client is connected. The new API is meant for
cases where server operators charge for LES using an off-protocol mechanism.
- adds a unit test for the new client manager.
- adds an end-to-end test using the network simulator that tests bandwidth
control functions through the new API.
* swarm/storage/mock: implement listings methods for mem and rpc stores
* swarm/storage/mock/rpc: add comments and newTestStore helper function
* swarm/storage/mock/mem: add missing comments
* swarm/storage/mock: add comments to new types and constants
* swarm/storage/mock/db: implement listings for mock/db global store
* swarm/storage/mock/test: add comments for MockStoreListings
* swarm/storage/mock/explorer: initial implementation
* cmd/swarm/global-store: add chunk explorer
* cmd/swarm/global-store: add chunk explorer tests
* swarm/storage/mock/explorer: add tests
* swarm/storage/mock/explorer: add swagger api definition
* swarm/storage/mock/explorer: not-zero test values for invalid addr and key
* swarm/storage/mock/explorer: test wildcard cors origin
* swarm/storage/mock/db: renames based on Fabio's suggestions
* swarm/storage/mock/explorer: add more comments to testHandler function
* cmd/swarm/global-store: terminate subprocess with Kill in tests
This changes default location of the data directory to use the LOCALAPPDATA
environment variable, resolving issues with remote home directories an improving
compatibility with Cygwin.
Fixes#2239Fixes#2237Fixes#16437
* signer/clef: make use of json-rpc notification
* signer: tidy up output of OnApprovedTx
* accounts/external, signer: implement remote signing of text, make accounts_sign take hexdata
* clef: added basic testscript
* signer, external, api: add clique signing test to debug rpc, fix clique signing in clef
* signer: fix clique interoperability between geth and clef
* clef: rename networkid switch to chainid
* clef: enable chainid flag
* clef, signer: minor changes from review
* clef: more tests for signer
* common/fdlimit: cap on MacOS file limits, fixes#18994
* common/fdlimit: fix Maximum-check to respect OPEN_MAX
* common/fdlimit: return error if OPEN_MAX is exceeded in Raise()
* common/fdlimit: goimports
* common/fdlimit: check value after setting fdlimit
* common/fdlimit: make comment a bit more descriptive
* cmd/utils: make fdlimit happy path a bit cleaner
* node: close AccountsManager in new Close method
* p2p/simulations, p2p/simulations/adapters: handle node close on shutdown
* node: move node ephemeralKeystore cleanup to stop method
* node: call Stop in Node.Close method
* cmd/geth: close node.Node created with makeFullNode in cli commands
* node: close Node instances in tests
* cmd/geth, node: minor code style fixes
* cmd, console, miner, mobile: proper node Close() termination
* Named functions and defined a basic EIP191 content type list
* Written basic content type functions
* Added ecRecover method in the clef api
* Updated the extapi changelog and addded indications in the README
* Changed the version of the external API
* Added tests for 0x45
* Implementing UnmarshalJSON() for TypedData
* Working on TypedData
* Solved the auditlog issue
* Changed method to signTypedData
* Changed mimes and implemented the 'encodeType' function for EIP-712
* Polished docstrings, ran goimports and swapped fmt.Errorf with errors.New where possible
* Drafted recursive encodeData
* Ran goimports and gofmt
* Drafted first version of EIP-712, including tests
* Temporarily switched to using common.Address in tests
* Drafted text/validator and and rewritten []byte as hexutil.Bytes
* Solved stringified address encoding issue
* Changed the property type required by signData from bytes to interface{}
* Fixed bugs in 'data/typed' signs
* Brought legal warning back after temporarily disabling it for development
* Added example RPC calls for account_signData and account_signTypedData
* Named functions and defined a basic EIP191 content type list
* Written basic content type functions
* Added ecRecover method in the clef api
* Updated the extapi changelog and addded indications in the README
* Added tests for 0x45
* Implementing UnmarshalJSON() for TypedData
* Working on TypedData
* Solved the auditlog issue
* Changed method to signTypedData
* Changed mimes and implemented the 'encodeType' function for EIP-712
* Polished docstrings, ran goimports and swapped fmt.Errorf with errors.New where possible
* Drafted recursive encodeData
* Ran goimports and gofmt
* Drafted first version of EIP-712, including tests
* Temporarily switched to using common.Address in tests
* Drafted text/validator and and rewritten []byte as hexutil.Bytes
* Solved stringified address encoding issue
* Changed the property type required by signData from bytes to interface{}
* Fixed bugs in 'data/typed' signs
* Brought legal warning back after temporarily disabling it for development
* Added example RPC calls for account_signData and account_signTypedData
* Polished and fixed PR
* Polished and fixed PR
* Solved malformed data panics and also wrote tests
* Solved malformed data panics and also wrote tests
* Added alphabetical sorting to type dependencies
* Added alphabetical sorting to type dependencies
* Added pretty print to data/typed UI
* Added pretty print to data/typed UI
* signer: more tests for typed data
* signer: more tests for typed data
* Fixed TestMalformedData4 errors and renamed IsValid to Validate
* Fixed TestMalformedData4 errors and renamed IsValid to Validate
* Fixed more new failing tests and deanonymised some functions
* Fixed more new failing tests and deanonymised some functions
* Added types to EIP712 output in cliui
* Added types to EIP712 output in cliui
* Fixed regexp issues
* Fixed regexp issues
* Added pseudo-failing test
* Added pseudo-failing test
* Fixed false positive test
* Fixed false positive test
* Added PrettyPrint method
* Added PrettyPrint method
* signer: refactor formatting and UI
* signer: make ui use new message format for signing
* Fixed breaking changes
* Fixed rules_test failing test
* Added extra regexp for reference types
* signer: more hard types
* Fixed failing test, formatted files
* signer: use golang/x keccak
* Fixed goimports error
* clef, signer: address some review concerns
* Implemented latest recommendations
* Fixed comments and uintint256 issue
* accounts, signer: fix mimetypes, add interface to sign data with passphrase
* signer, accounts: remove duplicated code, pass hash preimages to signing
* signer: prevent panic in type assertions, make cliui print rawdata as quotable-safe
* signer: linter fixes, remove deprecated crypto dependency
* accounts: fix goimport
* cmd, eth: Added in the flag to step geth once sync based on input
* cmd, eth: 16400 Add an option to stop geth once in sync.
* cmd: 16400 Add an option to stop geth once in sync. WIP
* cmd/geth/main, les/fletcher: added in light mode support
* cmd/geth/main, les/fletcher: Cleaned Comments and code for light mode
* cmd: 16400 Fixed formatting issue and cleaned code
* cmd, eth, les: 16400 Fixed formatting issues
* cmd, eth, les: Performed gofmt to update formatting
* cmd, eth, les: Fixed bugs resulting formatting
* cmd/geth, eth/, les: switched to downloader event
* eth: Fixed styling and gen_config
* eth/: Fix nil error in config file
* cmd/geth: Updated countdown log
* les/fetcher.go: Removed depcreated channel
* eth/downloader.go: Removed deprecated select
* cmd/geth, cmd/utils: Fixed minor issues
* eth: Reverted config files to proper format
* eth: Fixed typo in config file
* cmd/geth, eth/down: Updated code to use header time stamp
* eth/downloader: Changed the time threshold to 10 minutes
* cmd/geth, eth/downloader: Updated downloading event to pass latest header
* cmd/geth: Updated main to use right timer object
* cmd/geth: Removed unused failed event
* cmd/geth: added in correct time field with type assertion
* cmd/geth, cmd/utils: Updated flag to use boolean
* cmd/geth, cmd/utils, eth/downloader: Cleaned up code based on recommendations
* cmd/geth: Removed unneeded import
* cmd/geth, eth/downloader: fixed event field and suggested changes
* cmd/geth, cmd/utils: Updated flag and linting issue
This PR is replacing the metrics.influxdb.host.tag cmd-line flag with metrics.influxdb.tags - a comma-separated key/value tags, that are passed to the InfluxDB reporter, so that we can index measurements with multiple tags, and not just one host tag.
This will be useful for Swarm, where we want to index measurements not just with the host tag, but also with bzzkey and git commit version (for long-running deployments).
This PR adds a new fork which disables EIP-1283. Internally it's called Petersburg,
but the genesis/config field is ConstantinopleFix.
The block numbers are:
7280000 for Constantinople on Mainnet
7280000 for ConstantinopleFix on Mainnet
4939394 for ConstantinopleFix on Ropsten
9999999 for ConstantinopleFix on Rinkeby (real number decided later)
This PR also defaults to using the same ConstantinopleFix number as whatever
Constantinople is set to. That is, it will default to mainnet behaviour if ConstantinopleFix
is not set.This means that for private networks which have already transitioned
to Constantinople, this PR will break the network unless ConstantinopleFix is
explicitly set!
* Initial work on a graphql API
* Added receipts, and more transaction fields.
* Finish receipts, add logs
* Add transactionCount to block
* Add types and .
* Update Block type to be compatible with ethql
* Rename nonce to transactionCount in Account, to be compatible with ethql
* Update transaction, receipt and log to match ethql
* Add query operator, for a range of blocks
* Added ommerCount to Block
* Add transactionAt and ommerAt to Block
* Added sendRawTransaction mutation
* Add Call and EstimateGas to graphQL API
* Refactored to use hexutil.Bytes instead of HexBytes
* Replace BigNum with hexutil.Big
* Refactor call and estimateGas to use ethapi struct type
* Replace ethgraphql.Address with common.Address
* Replace ethgraphql.Hash with common.Hash
* Converted most quantities to Long instead of Int
* Add support for logs
* Fix bug in runFilter
* Restructured Transaction to work primarily with headers, so uncle data is reported properly
* Add gasPrice API
* Add protocolVersion API
* Add syncing API
* Moved schema into its own source file
* Move some single use args types into anonymous structs
* Add doc-comments
* Fixed backend fetching to use context
* Added (very) basic tests
* Add documentation to the graphql schema
* Fix reversion for formatting of big numbers
* Correct spelling error
* s/BigInt/Long/
* Update common/types.go
* Fixes in response to review
* Fix lint error
* Updated calls on private functions
* Fix typo in graphql.go
* Rollback ethapi breaking changes for graphql support
Co-Authored-By: Arachnid <arachnid@notdot.net>
* geth/core/eth: implement constantinople override flag
* les: implemnent constantinople override flag for les clients
* cmd/geth, eth, les: fix typo, move flag to experimentals
* Rejects peers that respond with a different hash for any of the passed in block numbers.
* Meant for emergency situations when the network forks unexpectedly.
- Have `${DataDir}/bzzd.ipc` as IPC path default.
- Respect the `--datadir` flag.
- Keep only the global `--ipcpath` flag and drop the local `--ipcpath` flag
as flags might overwrite each other. (Note: before global `--ipcpath`
was ignored even if it was set)
fixes ethersphere#795
- Replace "crypto/rand" to "math/rand" for files content generation
- Remove swarm/network_test.go.Shuffle and swarm/btm/btm_test.go.Shuffle - because go1.9 support dropped (see https://github.com/ethereum/go-ethereum/pull/17807 and comments to swarm/network_test.go.Shuffle)
* cmd/clef: replace password arg with prompt (#17829)
Entering passwords on the command line is not secure as it is easy to recover from bash_history or the process table.
1. The clef command addpw was renamed to setpw to better describe the functionality
2. The <password> argument was removed and replaced with an interactive prompt
* cmd/clef: remove undeclared variable
This adds the global accumulated refund counter to the standard
json output as a numeric json value. Previously this was not very
interesting since it was not used much, but with the new sstore
gas changes the value is a lot more interesting from a consensus
investigation perspective.
This PR adds enode.LocalNode and integrates it into the p2p
subsystem. This new object is the keeper of the local node
record. For now, a new version of the record is produced every
time the client restarts. We'll make it smarter to avoid that in
the future.
There are a couple of other changes in this commit: discovery now
waits for all of its goroutines at shutdown and the p2p server
now closes the node database after discovery has shut down. This
fixes a leveldb crash in tests. p2p server startup is faster
because it doesn't need to wait for the external IP query
anymore.
- Mime types generator (Standard "mime" package rely on system-settings, see mime.osInitMime)
- Changed swarm/api.Upload:
- simplify I/O throttling by semaphore primitive and use file name where possible
- f.Close() must be called in Defer - otherwise panic or future added early return will cause leak of file descriptors
- one error was suppressed
When CLI tests were spanning new nodes, the log level verbosity was
hard coded as 6. So the Swarm process was always polluting the test
output with TRACE level logs.
Now `go test -v ./cmd/swarm -loglevel 0` works as expected.
* swarm/storage/mru: Adaptive Frequency
swarm/storage/mru/lookup: fixed getBaseTime
Added NewEpoch constructor
swarm/api/client: better error handling in GetResource()
swarm/storage/mru: Renamed structures.
Renamed ResourceMetadata to ResourceID.
Renamed ResourceID.Name to ResourceID.Topic
swarm/storage/mru: Added binarySerializer interface and test tools
swarm/storage/mru/lookup: Changed base time to time and + marshallers
swarm/storage/mru: Added ResourceID (former resourceMetadata)
swarm/storage/mru: Added ResourceViewId and serialization tests
swarm/storage/mru/lookup: fixed epoch unmarshaller. Added Epoch Equals
swarm/storage/mru: Fixes as per review comments
cmd/swarm: reworded resource create/update help text regarding topic
swarm/storage/mru: Added UpdateLookup and serializer tests
swarm/storage/mru: Added UpdateHeader, serializers and tests
swarm/storage/mru: changed UpdateAddr / epoch to Base()
swarm/storage/mru: Added resourceUpdate serializer and tests
swarm/storage/mru: Added SignedResourceUpdate tests and serializers
swarm/storage/mru/lookup: fixed GetFirstEpoch bug
swarm/storage/mru: refactor, comments, cleanup
Also added tests for Topic
swarm/storage/mru: handler tests pass
swarm/storage/mru: all resource package tests pass
swarm/storage/mru: resource test pass after adding
timestamp checking support
swarm/storage/mru: Added JSON serializers to ResourceIDView structures
swarm/storage/mru: Sever, client, API test pass
swarm/storage/mru: server test pass
swarm/storage/mru: Added topic length check
swarm/storage/mru: removed some literals,
improved "previous lookup" test case
swarm/storage/mru: some fixes and comments as per review
swarm/storage/mru: first working version without metadata chunk
swarm/storage/mru: Various fixes as per review
swarm/storage/mru: client test pass
swarm/storage/mru: resource query strings and manifest-less queries
swarm/storage/mru: simplify naming
swarm/storage/mru: first autofreq working version
swarm/storage/mru: renamed ToValues to AppendValues
swarm/resource/mru: Added ToValues / FromValues for URL query strings
swarm/storage/mru: Changed POST resource to work with query strings.
No more JSON.
swarm/storage/mru: removed resourceid
swarm/storage/mru: Opened up structures
swarm/storage/mru: Merged Request and SignedResourceUpdate
swarm/storage/mru: removed initial data from CLI resource create
swarm/storage/mru: Refactor Topic as a direct fixed-length array
swarm/storage/mru/lookup: Comprehensive GetNextLevel tests
swarm/storage/mru: Added comments
Added length checks in Topic
swarm/storage/mru: fixes in tests and some code comments
swarm/storage/mru/lookup: new optimized lookup algorithm
swarm/api: moved getResourceView to api out of server
swarm/storage/mru: Lookup algorithm working
swarm/storage/mru: comments and renamed NewLookupParams
Deleted commented code
swarm/storage/mru/lookup: renamed Epoch.LaterThan to After
swarm/storage/mru/lookup: Comments and tidying naming
swarm/storage/mru: fix lookup algorithm
swarm/storage/mru: exposed lookup hint
removed updateheader
swarm/storage/mru/lookup: changed GetNextEpoch for initial values
swarm/storage/mru: resource tests pass
swarm/storage/mru: valueSerializer interface and tests
swarm/storage/mru/lookup: Comments, improvements, fixes, more tests
swarm/storage/mru: renamed UpdateLookup to ID, LookupParams to Query
swarm/storage/mru: renamed query receiver var
swarm/cmd: MRU CLI tests
* cmd/swarm: remove rogue fmt
* swarm/storage/mru: Add version / header for future use
* swarm/storage/mru: Fixes/comments as per review
cmd/swarm: remove rogue fmt
swarm/storage/mru: Add version / header for future use-
* swarm/storage/mru: fix linter errors
* cmd/swarm: Speeded up TestCLIResourceUpdate
* signer: remove local path disclosure from extapi
* signer: show more data in cli ui
* rpc: make http server forward UA and Origin via Context
* signer, clef/core: ui changes + display UA and Origin
* signer: cliui - indicate less trust in remote headers, see https://github.com/ethereum/go-ethereum/issues/17637
* signer: prevent possibility swap KV-entries in aes_gcm storage, fixes#17635
* signer: remove ecrecover from external API
* signer,clef: default reject instead of warn + valideate new passwords. fixes#17632 and #17631
* signer: check calldata length even if no ABI signature is present
* signer: fix failing testcase
* clef: remove account import from external api
* signer: allow space in passwords, improve error messsage
* signer/storage: fix typos
Package p2p/enode provides a generalized representation of p2p nodes
which can contain arbitrary information in key/value pairs. It is also
the new home for the node database. The "v4" identity scheme is also
moved here from p2p/enr to remove the dependency on Ethereum crypto from
that package.
Record signature handling is changed significantly. The identity scheme
registry is removed and acceptable schemes must be passed to any method
that needs identity. This means records must now be validated explicitly
after decoding.
The enode API is designed to make signature handling easy and safe: most
APIs around the codebase work with enode.Node, which is a wrapper around
a valid record. Going from enr.Record to enode.Node requires a valid
signature.
* p2p/discover: port to p2p/enode
This ports the discovery code to the new node representation in
p2p/enode. The wire protocol is unchanged, this can be considered a
refactoring change. The Kademlia table can now deal with nodes using an
arbitrary identity scheme. This requires a few incompatible API changes:
- Table.Lookup is not available anymore. It used to take a public key
as argument because v4 protocol requires one. Its replacement is
LookupRandom.
- Table.Resolve takes *enode.Node instead of NodeID. This is also for
v4 protocol compatibility because nodes cannot be looked up by ID
alone.
- Types Node and NodeID are gone. Further commits in the series will be
fixes all over the the codebase to deal with those removals.
* p2p: port to p2p/enode and discovery changes
This adapts package p2p to the changes in p2p/discover. All uses of
discover.Node and discover.NodeID are replaced by their equivalents from
p2p/enode.
New API is added to retrieve the enode.Node instance of a peer. The
behavior of Server.Self with discovery disabled is improved. It now
tries much harder to report a working IP address, falling back to
127.0.0.1 if no suitable address can be determined through other means.
These changes were needed for tests of other packages later in the
series.
* p2p/simulations, p2p/testing: port to p2p/enode
No surprises here, mostly replacements of discover.Node, discover.NodeID
with their new equivalents. The 'interesting' API changes are:
- testing.ProtocolSession tracks complete nodes, not just their IDs.
- adapters.NodeConfig has a new method to create a complete node.
These changes were needed to make swarm tests work.
Note that the NodeID change makes the code incompatible with old
simulation snapshots.
* whisper/whisperv5, whisper/whisperv6: port to p2p/enode
This port was easy because whisper uses []byte for node IDs and
URL strings in the API.
* eth: port to p2p/enode
Again, easy to port because eth uses strings for node IDs and doesn't
care about node information in any way.
* les: port to p2p/enode
Apart from replacing discover.NodeID with enode.ID, most changes are in
the server pool code. It now deals with complete nodes instead
of (Pubkey, IP, Port) triples. The database format is unchanged for now,
but we should probably change it to use the node database later.
* node: port to p2p/enode
This change simply replaces discover.Node and discover.NodeID with their
new equivalents.
* swarm/network: port to p2p/enode
Swarm has its own node address representation, BzzAddr, containing both
an overlay address (the hash of a secp256k1 public key) and an underlay
address (enode:// URL).
There are no changes to the BzzAddr format in this commit, but certain
operations such as creating a BzzAddr from a node ID are now impossible
because node IDs aren't public keys anymore.
Most swarm-related changes in the series remove uses of
NewAddrFromNodeID, replacing it with NewAddr which takes a complete node
as argument. ToOverlayAddr is removed because we can just use the node
ID directly.
Interpreter initialization is left to the PRs implementing them.
Options for external interpreters are passed after a colon in the
`--vm.ewasm` and `--vm.evm` switches.
* ethdb: unified code comment style.
* puppeth: it is unnecessary to alloc pre-funded to 256 addresses
* Revert "puppeth: it is unnecessary to alloc pre-funded to 256 addresses"
This reverts commit 5e04fbccf0b8aca85030af1779bb7a949033d9d8.
* puppeth: fix comment typo
* Revert "ethdb: unified code comment style."
This reverts commit a581efb3f06a96fc7aec0bfae03c7b6d5a0c1a77.
* swarm: Added lightnode flag
Added --lightnode command line parameter
Added LightNode to Handshake message
* swarm/config: Fixed variable naming
* cmd/swarm: Changed BoolTFlag to BoolFlag for SwarmLightNodeEnabled
* swarm/network: Changed logging
* swarm/network: Changed protocol version testing
* swarm/network: Renamed DefaultNetworkID variable to TestProtocolNetworkID
* swarm/network: Bumped protocol version
* swarm/network: Changed LightNode handhsake test to table driven
* swarm/network: Changed back TestProtocolVersion to 5 for now
* swarm/network: Moved the test configuration inside the test function scope
* swarm/network/simulation: increase the sleep duration for TestRun
* cmd/swarm, swarm: fix failing tests on mac
* cmd/swarm: update TestCLISwarmFs skip comment
* swarm/network/simulation: adjust disconnections on simulation close
* swarm/network/simulation: call cleanups after net shutdown
* consensus/ethash: start remote ggoroutine to handle remote mining
* consensus/ethash: expose remote miner api
* consensus/ethash: expose submitHashrate api
* miner, ethash: push empty block to sealer without waiting execution
* consensus, internal: add getHashrate API for ethash
* consensus: add three method for consensus interface
* miner: expose consensus engine running status to miner
* eth, miner: specify etherbase when miner created
* miner: commit new work when consensus engine is started
* consensus, miner: fix some logics
* all: delete useless interfaces
* consensus: polish a bit
* rpc: Make HTTP server timeout values configurable
* rpc: Remove flags for setting HTTP Timeouts, configuring via .toml is sufficient.
* rpc: Replace separate constants with a single default struct.
* rpc: Update HTTP Server Read and Write Timeouts to 30s.
* rpc: Remove redundant NewDefaultHTTPTimeouts function.
* rpc: document HTTPTimeouts.
* rpc: sanitize timeout values for library use
* build: add support for different package and binary names
* build: bump up copyright date
* build: change default PackageName to empty string
* build, internal, swarm: enhance build/release process
* build: hack ethereum-swarm as a "depends" in deb package
* build/ci: remove redundant variables
* build, cmd, mobile, params, swarm: remove VERSION file; rename Version to VersionMeta;
* internal: remove VERSION() method which reads VERSION file
* build: fix VersionFilePath to Version
* Makefile: remove clean_go_build_cache.sh until it works
* Makefile: revert removal of clean_go_build_cache.sh
* swarm/storage/mru: Add embedded publickey and remove ENS dep
This commit breaks swarm, swarm/api...
but tests in swarm/storage/mru pass
* swarm: Refactor swarm, swarm/api to mru changes, make tests pass
* swarm/storage/mru: Remove self from recv, remove test ens vldtr
* swarm/storage/mru: Remove redundant test, expose ResourceHash mthd
* swarm/storage/mru: Make HeaderGetter mandatory + godoc fixes
* swarm/storage: Remove validator prefix for metadata chunk
* swarm/storage/mru: Use Address instead of PublicKey
* swarm/storage/mru: Change index from name to metadata chunk addr
* swarm/storage/mru: Refactor swarm/api/... to MRU index changes
* swarm/storage/mru: Refactor cleanup
* swarm/storage/mru: Rebase cleanup
* swarm: Use constructor for GenericSigner MRU in swarm.go
* swarm/storage: Change to BMTHash for MRU hashing
* swarm/storage: Reduce loglevel on chunk validator logs
* swarm/storage/mru: Delint
* swarm: MRU Rebase cleanup
* swarm/storage/mru: client-side mru signatures
Rebase to PR #668 and fix all conflicts
* swarm/storage/mru: refactor and documentation
* swarm/resource/mru: error-checking tests for parseUpdate/newUpdateChunk
* swarm/storage/mru: Added resourcemetadata tests
* swarm/storage/mru: Added tests for UpdateRequest
* swarm/storage/mru: more test coverage for UpdateRequest and comments
* swarm/storage/mru: Avoid fake chunks in parseUpdate()
* swarm/storage/mru: Documented resource.go extensively
moved some functions where they make most sense
* swarm/storage/mru: increase test coverage for UpdateRequest and
variable name changes throughout to increase consistency
* swarm/storage/mru: moved default timestamp to NewCreateRequest-
* swarm/storage/mru: lookup refactor
* swarm/storage/mru: added comments and renamed raw flag to rawmru
* swarm/storage/mru: fix receiver typo
* swarm/storage/mru: refactored update chunk new/create
* swarm/storage/mru: refactored signature digest to avoid malleability
* swarm/storage/mru: optimize update data serialization
* swarm/storage/mru: refactor and cleanup
* swarm/storage/mru: add timestamp struct and serialization
* swarm/storage/mru: fix lint error and mark some old code for deletion
* swarm/storage/mru: remove unnecessary variable
* swarm/storage/mru: Added more comments throughout
* swarm/storage/mru: Refactored metadata chunk layout + extensive error...
* swarm/storage/mru: refactor cli parser
Changed resource info output to JSON
* swarm/storage/mru: refactor serialization for extensibility
refactored error messages to NewErrorf
* swarm/storage/mru: Moved Signature to resource_sign.
Check Sign errors in server tests
* swarm/storage/mru: Remove isSafeName() checks
* swarm/storage/mru: scrubbed off all references to "block" for time
* swarm/storage/mru: removed superfluous isSynced() call.
* swarm/storage/mru: remove isMultihash() and ToSafeName functions
* swarm/storage/mru: various fixes and comments
* swarm/storage/mru: decoupled cli for independent create/update
* Made resource name optional
* Removed unused LookupPrevious
* swarm/storage/mru: Decoupled resource create / update & refactor
* swarm/storage/mru: Fixed some comments as per issues raised in PR #743
* swarm/storage/mru: Cosmetic changes as per #743 comments
* swarm/storage/mru: refct request encoder/decoder > marshal/unmarshal
* swarm/storage/mru: Cosmetic changes as per review in #748
* swarm/storage/mru: removed timestamp proof placeholder
* swarm/storage/mru: cosmetic/doc/fixes changes as per comments in #704
* swarm/storage/mru: removed unnecessary check in Handler.update
* swarm/storage/mru: Implemented Marshaler/Unmarshaler iface in Request
* swarm/storage/mru: Fixed linter error
* swarm/storage/mru: removed redundant address in signature digest
* swarm/storage/mru: fixed bug: LookupLatestVersionInPeriod not working
* swarm/storage/mru: Unfold Request creation API for create or update+create
set common time source for mru package
* swarm/api/http: fix HandleGetResource error variable shadowed
when requesting a resource that does not exist
* swarm/storage/mru: Add simple check to detect duplicate updates
* swarm/storage/mru: moved Multihash() to the right place.
* cmd/swarm: remove unneeded clientaccountmanager.go
* swarm/storage/mru: Changed some comments as per reviews in #784
* swarm/storage/mru: Made SignedResourceUpdate.GetDigest() public
* swarm/storage/mru: cosmetic changes as per comments in #784
* cmd/swarm: Inverted --multihash flag default
* swarm/storage/mru: removed Verify from SignedResourceUpdate.fromChunk
* swarm/storage/mru: Moved validation code out of serializer
Cosmetic / comment changes
* swarm/storage/mru: Added unit tests for UpdateLookup
* swarm/storage/mru: Increased coverage of metadata serialization
* swarm/storage/mru: Increased test coverage of updateHeader serializers
* swarm/storage/mru: Add resourceUpdate serializer test
* cmd/swarm: minor cli flag text adjustments
* swarm/api/http: sticky footer for swarm landing page using flex
* swarm/api/http: sticky footer for error pages and fix for multiple choices
* cmd/swarm, swarm/storage, swarm: fix mingw on windows test issues
* cmd/swarm: update description of swarm cmd
* swarm: added network ID test
* cmd/swarm: support for smoke tests on the production swarm cluster
* cmd/swarm/swarm-smoke: simplify cluster logic as per suggestion
* swarm: propagate ctx to internal apis (#754)
* swarm/metrics: collect disk measurements
* swarm/bmt: fix io.Writer interface
* Write now tolerates arbitrary variable buffers
* added variable buffer tests
* Write loop and finalise optimisation
* refactor / rename
* add tests for empty input
* swarm/pss: (UPDATE) Generic notifications package (#744)
swarm/pss: Generic package for creating pss notification svcs
* swarm: Adding context to more functions
* swarm/api: change colour of landing page in templates
* swarm/api: change landing page to react to enter keypress
Prior to this change, when geth was started with `geth -dev -rpc`,
it would report a network id of `1` in response to the `net_version` RPC
request. But the actual network id it used to verify transactions
was `1337`.
This change causes geth instead respond with `1337` to the `net_version`
RPC when geth is started with `geth -dev -rpc`.
ToECDSAPub was unsafe because it returned a non-nil key with nil X, Y in
case of invalid input. This change replaces ToECDSAPub with
UnmarshalPubkey across the codebase.
Allow the --abi flag to be given - to indicate that it should read the
ABI information from standard input. It expects to read the solc output
with the --combined-json flag providing bin, abi, userdoc, devdoc, and
metadata, and works very similarly to the internal invocation of solc,
except it allows external invocation of solc.
This facilitates integration with more complex solc invocations, such
as invocations that require path remapping or --allow-paths tweaks.
Simple usage example:
solc --combined-json bin,abi,userdoc,devdoc,metadata *.sol | abigen --abi -
* whisper/mailserver: pass init error to the caller
* whisper/mailserver: add returns to fmt.Errorf
* whisper/mailserver: check err in mailserver init test
* common: delete StringToAddress, StringToHash
These functions are confusing because they don't parse hex, but use the
bytes of the string. This change removes them, replacing all uses of
StringToAddress(s) by BytesToAddress([]byte(s)).
* eth/filters: remove incorrect use of common.BytesToAddress
The diagnostic tool was saving the unencrypted version of the messages, which is an obvious
security flaw. As of this commit:
* encrypted messages saved instead of plain text.
* all messages are stored, even that created by the user of wnode.
This is in preparation for the switch to libp2p: the ID generated
will be from a private key created with the help of libp2p's crypto
library, while Whisper will still use Go's default crypto libraries
for encrypting its messages. This change removes a conflict.
It shouldn't have any impact as the person receiving emails is
the user, not the node.
* cmd,node,rpc: add allowedHosts to prevent dns rebinding attacks
* p2p,node: Fix bug with dumpconfig introduced in r54aeb8e4c0bb9f0e7a6c67258af67df3b266af3d
* rpc: add wildcard support for rpcallowedhosts + go fmt
* cmd/geth, cmd/utils, node, rpc: ignore direct ip(v4/6) addresses in rpc virtual hostnames check
* http, rpc, utils: make vhosts into map, address review concerns
* node: change log messages to use geth standard (not sprintf)
* rpc: fix spelling
* p2p: add DialRatio for configuration of inbound vs. dialed connections
* p2p: add connection flags to PeerInfo
* p2p/netutil: add SameNet, DistinctNetSet
* p2p/discover: improve revalidation and seeding
This changes node revalidation to be periodic instead of on-demand. This
should prevent issues where dead nodes get stuck in closer buckets
because no other node will ever come along to replace them.
Every 5 seconds (on average), the last node in a random bucket is
checked and moved to the front of the bucket if it is still responding.
If revalidation fails, the last node is replaced by an entry of the
'replacement list' containing recently-seen nodes.
Most close buckets are removed because it's very unlikely we'll ever
encounter a node that would fall into any of those buckets.
Table seeding is also improved: we now require a few minutes of table
membership before considering a node as a potential seed node. This
should make it less likely to store short-lived nodes as potential
seeds.
* p2p/discover: fix nits in UDP transport
We would skip sending neighbors replies if there were fewer than
maxNeighbors results and CheckRelayIP returned an error for the last
one. While here, also resolve a TODO about pong reply tokens.
The bulk of the issue was to adapt to the new requirement
that a v6 filter has to either contain a symmertric key or
an asymmetric one.
This commits revert one of the fixes that I made to remove
a linter warning: unexporting NewSentMessage. This is not
really a problem as I have a cleanup in the pipe that will
solve this issue.
* whisper: fixes warnings from the code linter
* whisper: more non-API-breaking changes
The remaining lint errors are because of auto-generated
files and one is because an exported function has a non-
exported return type. Changing this would break the API,
and will be part of another commit for easier reversal.
* whisper: un-export NewSentMessage to please the linter
This is an API change, which is why it's in its own commit.
This change was initiated after the linter complained that
the returned type wasn't exported. I chose to un-export
the function instead of exporting the type, because that
type is an implementation detail that I would like to
change in the near future to make the code more
readable and with an increased coverage.
* whisper: update gencodec output after upgrading it to new lint standards
This commit affects p2p/discv5 "topic discovery" by running it on
the same UDP port where the old discovery works. This is realized
by giving an "unhandled" packet channel to the old v4 discovery
packet handler where all invalid packets are sent. These packets
are then processed by v5. v5 packets are always invalid when
interpreted by v4 and vice versa. This is ensured by adding one
to the first byte of the packet hash in v5 packets.
DiscoveryV5Bootnodes is also changed to point to new bootnodes
that are implementing the changed packet format with modified
hash. Existing and new v5 bootnodes are both running on different
ports ATM.
This commit:
- Adds a --msgfile option to read the message to sign from a file
instead of command line argument.
- Adds a unit test for signing subcommands.
- Removes some weird whitespace in the code.
* dashboard: footer, deep state update
* dashboard: resolve asset path
* dashboard: remove bundle.js
* dashboard: prevent state update on every reconnection
* dashboard: fix linter issue
* dashboard, cmd: minor UI fix, include commit hash
* remove geth binary
* dashboard: gitCommit renamed to commit
* dashboard: move the geth version to the right, make commit optional
* dashboard: commit limited to 7 characters
* dashboard: limit commit length on client side
* dashboard: run go generate
* common/fdlimit: Move fdlimit files to separate package
When go-ethereum is used as a library the calling program need to set
the FD limit.
This commit extract fdlimit files to a separate package so it can be
used outside of go-ethereum.
* common/fdlimit: Remove FdLimit from functions signature
* common/fdlimit: Rename fdlimit functions
* core/types, core/vm, eth, tests: regenerate gencodec files
* Makefile: update devtools target
Install protoc-gen-go and print reminders about npm, solc and protoc.
Also switch to github.com/kevinburke/go-bindata because it's more
maintained.
* contracts/ens: update contracts and regenerate with solidity v0.4.19
The newer upstream version of the FIFSRegistrar contract doesn't set the
resolver anymore. The resolver is now deployed separately.
* contracts/release: regenerate with solidity v0.4.19
* contracts/chequebook: fix fallback and regenerate with solidity v0.4.19
The contract didn't have a fallback function, payments would be rejected
when compiled with newer solidity. References to 'mortal' and 'owned'
use the local file system so we can compile without network access.
* p2p/discv5: regenerate with recent stringer
* cmd/faucet: regenerate
* dashboard: regenerate
* eth/tracers: regenerate
* internal/jsre/deps: regenerate
* dashboard: avoid sed -i because it's not portable
* accounts/usbwallet/internal/trezor: fix go generate warnings
