* feature: do trie prefetch on state prefetch
Currently, state prefetch just pre execute the transactions and discard the results.
It is helpful to increase the snapshot cache hit rate.
It would be more helpful, if it can do trie prefetch at the same time, since the it will
preload the trie node and build the trie tree in advance.
This patch is to implement it, by reusing the main trie prefetch and doing finalize after
transaction is executed.
* some code improvements for trie prefetch
** increase pendingSize before dispatch tasks
** use throwaway StateDB for TriePrefetchInAdvance and remove the prefetcherLock
** remove the necessary drain operation in trie prefetch mainloop,
trie prefetcher won't be used after close.
* trie prefetcher for From/To address in advance
We found that trie prefetch could be not fast enough, especially trie prefetch of
the outer big state trie tree.
Instead of do trie prefetch until a transaction is finalized, we could do trie prefetch
in advance. Try to prefetch the trie node of the From/To accounts, since their root hash
are most likely to be changed.
* Parallel TriePrefetch for large trie update.
Currently, we create a subfetch for each account address to do trie prefetch. If the address
has very large state change, trie prefetch could be not fast enough, e.g. a contract modified
lots of KV pair or a large number of account's root hash is changed in a block.
With this commit, there will be children subfetcher created to do trie prefetch in parallell if
the parent subfetch's workload exceed the threshold.
* some improvemnts of parallel trie prefetch implementation
1.childrenLock is removed, since it is not necessary
APIs of triePrefetcher is not thread safe, they should be used sequentially.
A prefetch will be interrupted by trie() or clos(), so we only need mark it as
interrupted and check before call scheduleParallel to avoid the concurrent access to paraChildren
2.rename subfetcher.children to subfetcher.paraChildren
3.use subfetcher.pendingSize to replace totalSize & processedIndex
4.randomly select the start child to avoid always feed the first one
5.increase threshold and capacity to avoid create too many child routine
* fix review comments
** nil check refine
** create a separate routine for From/To prefetch, avoid blocking the cirtical path
* remove the interrupt member
* not create a signer for each transaction
* some changes to triePrefetcher
** remove the abortLoop, move the subfetcher abort operation into mainLoop
since we want to make subfetcher's create & schedule & abort within a loop to
avoid concurrent access locks.
** no wait subfetcher's term signal in abort()
it could speed up the close by closing subfetcher concurrently.
we send stop signnal to all subfetchers in burst and wait their term signal later.
* some coding improve for subfetcher.scheduleParallel
* fix a UT crash of s.prefetcher == nil
* update parallel trie prefetcher configuration
tested with different combination of parallelTriePrefetchThreshold & parallelTriePrefetchCapacity,
found the most efficient configure could be:
parallelTriePrefetchThreshold = 10
parallelTriePrefetchCapacity = 20
* fix review comments: code refine
* Redesign triePrefetcher to make it thread safe
There are 2 types of triePrefetcher instances:
1.New created triePrefetcher: it is key to do trie prefetch to speed up validation phase.
2.Copied triePrefetcher: it only copy the prefetched trie information, actually it won't do
prefetch at all, the copied tries are all kept in p.fetches.
Here we try to improve the new created one, to make it concurrent safe, while the copied one's
behavior stay unchanged(its logic is very simple).
As commented in triePrefetcher struct, its APIs are not thread safe. So callers should make sure
the created triePrefetcher should be used within a single routine.
As we are trying to improve triePrefetcher, we would use it concurrently, so it is necessary to
redesign it for concurrent access.
The design is simple:
** start a mainLoop to do all the work, APIs just send channel message.
Others:
** remove the metrics copy, since it is useless for copied triePrefetcher
** for trie(), only get subfetcher through channel to reduce the workload of mainloop
* some code enhancement for triePrefetcher redesign
* some fixup: rename, temporary trie chan for concurrent safe.
* fix review comments
* add some protection in case the trie prefetcher is already stopped
* fix review comments
** make close concurrent safe
** fix potential deadlock
* replace channel by RWMutex for a few triePrefetcher APIs
For APIs like: trie(), copy(), used(), it is simpler and more efficient to
use a RWMutex instead of channel communicaton.
Since the mainLoop would be busy handling trie request, while these trie request
can be processed in parallism.
We would only keep prefetch and close within the mainLoop, since they could update
the fetchers
* add lock for subfecter.used access to make it concurrent safe
* no need to create channel for copied triePrefetcher
* fix trie_prefetcher_test.go
trie prefetcher’s behavior has changed, prefetch() won't create subfetcher immediately.
it is reasonable, but break the UT, to fix the failed UT
This enables the following linters
- typecheck
- unused
- staticcheck
- bidichk
- durationcheck
- exportloopref
- gosec
WIth a few exceptions.
- We use a deprecated protobuf in trezor. I didn't want to mess with that, since I cannot meaningfully test any changes there.
- The deprecated TypeMux is used in a few places still, so the warning for it is silenced for now.
- Using string type in context.WithValue is apparently wrong, one should use a custom type, to prevent collisions between different places in the hierarchy of callers. That should be fixed at some point, but may require some attention.
- The warnings for using weak random generator are squashed, since we use a lot of random without need for cryptographic guarantees.
This PR fixes the flaw that @rjl493456442 found in https://github.com/ethereum/go-ethereum/pull/#issuecomment-1093817551 , namely, that the snapshot iterator uses the combined (disk + difflayers) 'view', wheres the raw iterator uses only the disk 'view'.
This PR instead splits up the work: one phase is iterating the disk layer data, another phase is loading the journalled difflayers and performing the same check there.
This commit replaces ioutil.TempDir with t.TempDir in tests. The
directory created by t.TempDir is automatically removed when the test
and all its subtests complete.
Prior to this commit, temporary directory created using ioutil.TempDir
had to be removed manually by calling os.RemoveAll, which is omitted in
some tests. The error handling boilerplate e.g.
defer func() {
if err := os.RemoveAll(dir); err != nil {
t.Fatal(err)
}
}
is also tedious, but t.TempDir handles this for us nicely.
Reference: https://pkg.go.dev/testing#T.TempDir
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
* cmd/geth: add db cmd to show metadata
* cmd/geth: better output generator status
Co-authored-by: Sina Mahmoodi <1591639+s1na@users.noreply.github.com>
* cmd: minor
Co-authored-by: Sina Mahmoodi <1591639+s1na@users.noreply.github.com>
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
* core/state/snapshot: fix BAD BLOCK error when snapshot is generating
* core/state/snapshot: alternative fix for the snapshot generator
* add comments and minor update
Co-authored-by: Martin Holst Swende <martin@swende.se>
* core/state/snapshot: reuse memory data instead of hitting disk when generating
* trie: minor nitpicks wrt the resolver optimization
* core/state/snapshot, trie: use key/value store for resolver
* trie: fix linter
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
* core/state/snapshot, ethdb: track deletions more accurately
* core/state/snapshot: don't reset the iterator, leveldb's screwy
* ethdb: don't mess with the insert batches for now
The main idea behind it is: the range compaction is very expensive
which can take a few hours to finish. During this long procedure,
a lot of exceptions can occur, e.g.
- Geth is killed manually
- Geth is killed because of machine crash
- etc
In order to minimize the effect of the exceptions, the compaction
is moved out of the pruning. So that even the compaction is not
finished, the pruning is regarded as done.
This adds support for EIP-2718 typed transactions as well as EIP-2930
access list transactions (tx type 1). These EIPs are scheduled for the
Berlin fork.
There very few changes to existing APIs in core/types, and several new APIs
to deal with access list transactions. In particular, there are two new
constructor functions for transactions: types.NewTx and types.SignNewTx.
Since the canonical encoding of typed transactions is not RLP-compatible,
Transaction now has new methods for encoding and decoding: MarshalBinary
and UnmarshalBinary.
The existing EIP-155 signer does not support the new transaction types.
All code dealing with transaction signatures should be updated to use the
newer EIP-2930 signer. To make this easier for future updates, we have
added new constructor functions for types.Signer: types.LatestSigner and
types.LatestSignerForChainID.
This change also adds support for the YoloV3 testnet.
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Felix Lange <fjl@twurst.com>
Co-authored-by: Ryan Schneider <ryanleeschneider@gmail.com>
* remove uneeded convertion type
* remove redundant type in composite literal
* omit explicit type where implicit
* remove unused redundant parenthesis
* remove redundant import alias duktape
Squashed from the following commits:
core/state: lazily init snapshot storage map
core/state: fix flawed meter on storage reads
core/state: make statedb/stateobjects reuse a hasher
core/blockchain, core/state: implement new trie prefetcher
core: make trie prefetcher deliver tries to statedb
core/state: refactor trie_prefetcher, export storage tries
blockchain: re-enable the next-block-prefetcher
state: remove panics in trie prefetcher
core/state/trie_prefetcher: address some review concerns
sq
This commit splits the eth package, separating the handling of eth and snap protocols. It also includes the capability to run snap sync (https://github.com/ethereum/devp2p/blob/master/caps/snap.md) , but does not enable it by default.
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Co-authored-by: Martin Holst Swende <martin@swende.se>
This commit fixes a flaw in two testcases, and brings down the exec-time from ~40s to ~8s for trie/TestIncompleteSync.
The checkConsistency was performed over and over again on the complete set of nodes, not just the recently added, turning it into a quadratic runtime.
* core/state/snapshot: print warning if failed to resolve journal
* core/state/snapshot: fix snapshot recovery
When we meet the snapshot journal consisted with:
- disk layer generator with new-format
- diff layer journal with old-format
The base layer should be returned without error.
The broken diff layer can be reconstructed later
but we definitely don't want to reconstruct the
huge diff layer.
* core: add tests
* core/state/snapshot: introduce snapshot journal version
* core: update the disk layer in an atomic way
* core: persist the disk layer generator periodically
* core/state/snapshot: improve logging
* core/state/snapshot: forcibly ensure the legacy snapshot is matched
* core/state/snapshot: add debug logs
* core, tests: fix tests and special recovery case
* core: polish
* core: add more blockchain tests for snapshot recovery
* core/state: fix comment
* core: add recovery flag for snapshot
* core: add restart after start-after-crash tests
* core/rawdb: fix imports
* core: fix tests
* core: remove log
* core/state/snapshot: fix snapshot
* core: avoid callbacks in SetHead
* core: fix setHead cornercase where the threshold root has state
* core: small docs for the test cases
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
* core/state/snapshot: add diskRoot function
* core/state/snapshot: disable iteration if the snapshot is generating
* core/state/snapshot: simplify the function
* core/state: panic for undefined layer
* core/state/snapshot: exit Geth if generator hits missing trie nodes
* core/state/snapshot: error instead of hard die on generator fault
* core/state/snapshot: don't enable logging on the tests
This change introduces garbage collection for the light client. Historical
chain data is deleted periodically. If you want to disable the GC, use
the --light.nopruning flag.
This PR implements the EVM state transition tool, which is intended
to be the replacement for our retesteth client implementation.
Documentation is present in the cmd/evm/README.md file.
Co-authored-by: Felix Lange <fjl@twurst.com>
* core/state: more verbose stateb errors
* core/state: fix flaw
* core/state: fixed lint
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
This finally adds the error check that the documentation of StateDB.dbErr
promises to do. dbErr was added in 9e5f03b6c (June 2017), and the check was
already missing in that commit. We somehow survived without it for three years.
* core/state/snapshot: implement storage iterator
* core/state/snapshot, tests: implement helper function
* core/state/snapshot: fix storage issue
If an account is deleted in the tx_1 but recreated in the tx_2,
the it can happen that in this diff layer, both destructedSet
and storageData records this account. In this case, the storage
iterator should be able to iterate the slots belong to new account
but disable further iteration in deeper layers(belong to old account)
* core/state/snapshot: address peter and martin's comment
* core/state: address comments
* core/state/snapshot: fix test
* all: seperate consensus error and evm internal error
There are actually two types of error will be returned when
a tranaction/message call is executed: (a) consensus error
(b) evm internal error. The former should be converted to
a consensus issue, e.g. The sender doesn't enough asset to
purchase the gas it specifies. The latter is allowed since
evm itself is a blackbox and internal error is allowed to happen.
This PR emphasizes the difference by introducing a executionResult
structure. The evm error is embedded inside. So if any error
returned, it indicates consensus issue happens.
And also this PR improve the `EstimateGas` API to return the concrete
revert reason if the transaction always fails
* all: polish
* accounts/abi/bind/backends: add tests
* accounts/abi/bind/backends, internal: cleanup error message
* all: address comments
* core: fix lint
* accounts, core, eth, internal: address comments
* accounts, internal: resolve revert reason if possible
* accounts, internal: address comments
This new API allows reading accounts and their content by address range.
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Felix Lange <fjl@twurst.com>
