* fix: crash of highestVerifiedHeader
* fix: panic of blobpool
* fix: genesis set up
* 1. modify NewDatabaseWithNodeDB to upstream
2. fix race use of hasher in statedb
3. fix use wrong value when updateTrie
* fix dir legacypool
* fix dir blobpool
* fix dir vote
* remove diffsync related code
* fix core/state/snapshot
* disable pipeCommit for now
* fix applyTransaction for bloom setting
* CI: fast finality in gasprice test
* CI: diffFetcher was removed
* CI: downloader, remove beaconsync test
* CI: no beaconsync in downloader, remove a failed case
TestCheckpointChallenge was removed in:
https://github.com/ethereum/go-ethereum/pull/27147
since after merge, it is useless for ethereum, but might be useful for BSC.
disable the case right now, as it is not a big issue.
* CI: bsc protocol decHandlers
* CI: receipt Bloom process
* 1. skip CheckConfigForkOrder for non-parlia engine
2. all test cases in core work well now
cd core && go test ./... -v
* fix test cases in trie dir
* CI: no beaconsync in downloader, remove a failed case(redo)
* fix dir miner
* fix dir cmd/geth
* CI: filter test, BaseFee & Finality
* fix dir graphql
* remove diffStore
* fix ethclient
* fix TestRPCGetTransactionReceipt
* fix dir internal
* ut add dir ethstats and signer
* disable pipeCommit thoroughly; fix concurrent map iteration and map write in statedb
* CI: fix snap sync
it could be changed by mistake
* fix tests/Run to generate snapshot
* prepare for merge
* remove useless
* use common hasher in getDeletedStateObject, no race here
* an critical comment for state.Prepare
* do not copy nil accessList
* add omitempty tag for unused new fields of core.Genesis
* remove totalFees
* calculate fees before FinalizeAndAssemble
* revert interface Finalize of consensus
* do not double gas limit upon london block
* use Leveldb as default
* Revert "remove diffStore"
This reverts commit df343b137412b0beb25298a6ba9c3c19e47f20b1.
* Revert "remove diffsync related code"
This reverts commit 8d84b81feae5d794cb5d7fcfdb7f5f7da751941b.
* compile pass after revert
* remove diffsync
* fix dir eth/protocols/trust
* fix TestFastNode
* decHandlers for trust protocol
* keep persist diff in test
This updates minisign to the latest version. One new thing is that minisign (not go-minisign) has started to prehash the file, and in order to make geth pass the version-check, we need to sign the file in legacy-mode.
This chang creates a GaugeInfo metrics type for registering informational (textual) metrics, e.g. geth version number. It also improves the testing for backend-exporters, and uses a shared subpackage in 'internal' to provide sample datasets and ordered registry.
Implements #21783
---------
Co-authored-by: Martin Holst Swende <martin@swende.se>
* core/blobpool: implement txpool for blob txs
* core/txpool: track address reservations to notice any weird bugs
* core/txpool/blobpool: add support for in-memory operation for tests
* core/txpool/blobpool: fix heap updating after SetGasTip if account is evicted
* core/txpool/blobpool: fix eviction order if cheap leading txs are included
* core/txpool/blobpool: add note as to why the eviction fields are not inited in reinject
* go.mod: pull in inmem billy form upstream
* core/txpool/blobpool: fix review commens
* core/txpool/blobpool: make heap and heap test deterministic
* core/txpool/blobpool: luv u linter
* core/txpool: limit blob transactions to 16 per account
* core/txpool/blobpool: fix rebase errors
* core/txpool/blobpool: luv you linter
* go.mod: revert some strange crypto package dep updates
This change removes PoW header syncing related code from LES and also deletes
duplicated packages les/catalyst, les/downloader and les/fetcher. These package copies
were created because people wanted to make changes in their eth/ counterparts, but weren't
able to adapt LES code to the API changes.
It is usually best to set GOMAXPROCS to the number of available CPU cores. However, setting
it like that does not work well when the process is quota-limited to a certain number of CPUs.
The automaxprocs library configures GOMAXPROCS, taking such limits into account.
This simplifies the code that initializes the discovery a bit, and
adds new flags for enabling/disabling discv4 and discv5 separately.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
This change adds back the 'geth --dev' mode of operation, using a cl-mocker.
---------
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
Co-authored-by: lightclient <14004106+lightclient@users.noreply.github.com>
The clean trie cache is persisted periodically, therefore Geth can
quickly warmup the cache in next restart.
However it will reduce the robustness of system. The assumption is
held in Geth that if the parent trie node is present, then the entire
sub-trie associated with the parent are all prensent.
Imagine the scenario that Geth rewinds itself to a past block and
restart, but Geth finds the root node of "future state" in clean
cache then regard this state is present in disk, while is not in fact.
Another example is offline pruning tool. Whenever an offline pruning
is performed, the clean cache file has to be removed to aviod hitting
the root node of "deleted states" in clean cache.
All in all, compare with the minor performance gain, system robustness
is something we care more.
The state availability is checked during the creation of a state reader.
- In hash-based database, if the specified root node does not exist on disk disk, then
the state reader won't be created and an error will be returned.
- In path-based database, if the specified state layer is not available, then the
state reader won't be created and an error will be returned.
This change also contains a stricter semantics regarding the `Commit` operation: once it has been performed, the trie is no longer usable, and certain operations will return an error.
This PR adds server-side limits for JSON-RPC batch requests. Before this change, batches
were limited only by processing time. The server would pick calls from the batch and
answer them until the response timeout occurred, then stop processing the remaining batch
items.
Here, we are adding two additional limits which can be configured:
- the 'item limit': batches can have at most N items
- the 'response size limit': batches can contain at most X response bytes
These limits are optional in package rpc. In Geth, we set a default limit of 1000 items
and 25MB response size.
When a batch goes over the limit, an error response is returned to the client. However,
doing this correctly isn't always possible. In JSON-RPC, only method calls with a valid
`id` can be responded to. Since batches may also contain non-call messages or
notifications, the best effort thing we can do to report an error with the batch itself is
reporting the limit violation as an error for the first method call in the batch. If a batch is
too large, but contains only notifications and responses, the error will be reported with
a null `id`.
The RPC client was also changed so it can deal with errors resulting from too large
batches. An older client connected to the server code in this PR could get stuck
until the request timeout occurred when the batch is too large. **Upgrading to a version
of the RPC client containing this change is strongly recommended to avoid timeout issues.**
For some weird reason, when writing the original client implementation, @fjl worked off of
the assumption that responses could be distributed across batches arbitrarily. So for a
batch request containing requests `[A B C]`, the server could respond with `[A B C]` but
also with `[A B] [C]` or even `[A] [B] [C]` and it wouldn't make a difference to the
client.
So in the implementation of BatchCallContext, the client waited for all requests in the
batch individually. If the server didn't respond to some of the requests in the batch, the
client would eventually just time out (if a context was used).
With the addition of batch limits into the server, we anticipate that people will hit this
kind of error way more often. To handle this properly, the client now waits for a single
response batch and expects it to contain all responses to the requests.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
* core/txpool: abstraction prep work for secondary pools (blob pool)
* core/txpool: leave subpool concepts to a followup pr
* les: fix tests using hard coded errors
* core/txpool: use bitmaps instead of maps for tx type filtering
* cryto/kzg4844: pull in the C and Go libs for KZG cryptography
* go.mod: pull in the KZG libraries
* crypto/kzg4844: add basic becnhmarks for ballpark numbers
* cmd, crypto: integrate both CKZG and GoKZG all the time, add flag
* cmd/utils, crypto/kzg4844: run library init on startup
* crypto/kzg4844: make linter happy
* crypto/kzg4844: push missing file
* crypto/kzg4844: fully disable CKZG but leave in the sources
* build, crypto/kzg4844, internal: link CKZG by default and with portable mode
* crypto/kzg4844: drop verifying the trusted setup in gokzg
* internal/build: yolo until it works?
* cmd/utils: make flag description friendlier
Co-authored-by: Martin Holst Swende <martin@swende.se>
* crypto/ckzg: no need for double availability check
* build: tiny flag cleanup nitpick
---------
Co-authored-by: Martin Holst Swende <martin@swende.se>
rename parameter
In this case, the naming of "extapi" might create some confusion. Although it represents an External Signer Backend, its name could be mistaken for an API. In reality, it is a backend instance used for communicating with external signers. A better naming choice could be "extBackend" or "externalBackend" to more accurately describe that it is a backend instance rather than an API.
Makes the `geth account ... ` commands usable even if a geth-process is already executing, since the account commands do not read the chaindata, it was not required for those to use the same locking mechanism.
---
Signed-off-by: jsvisa <delweng@gmail.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
* cmd/utils, node: switch to Pebble as the default db if none exists
* node: fall back to LevelDB on platforms not supporting Pebble
* core/rawdb, node: default to Pebble at the node level
* cmd/geth: fix some tests explicitly using leveldb
* ethdb/pebble: allow double closes, makes tests simpler
This change prints out more information about the problem, in the case where geth detects a gap between leveldb and ancients, so we can determine more exactly where the gap is (what the first missing is). Also prints out more metadata.
---------
Co-authored-by: Martin Holst Swende <martin@swende.se>
The EmptyRootHash and EmptyCodeHash are defined everywhere in the codebase, this PR replaces all of them with unified one defined in core/types package, and also defines constants for TxRoot, WithdrawalsRoot and UncleRoot
This change ports some changes from the main PBSS PR:
- get rid of callback function in `trie.Database.Commit` which is not required anymore
- rework the `nodeResolver` in `trie.Iterator` to make it compatible with multiple state scheme
- some other shallow changes in tests and typo-fixes
This PR moves some trie-related db accessor methods to a different file, and also removes the schema type. Instead of the schema type, a string is used to distinguish between hashbased/pathbased db accessors.
This also moves some code from trie package to rawdb package.
This PR is intended to be a no-functionality-change prep PR for #25963 .
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
* eth: cmd: deprecate personal namespace
* eth: cmd: move deprecation to node
* node: disable toml of enablepersonal
* node: disable personal on ipc as well
* Update node/node.go
Co-authored-by: Martin Holst Swende <martin@swende.se>
* console: error -> warn
* node: less roulette
---------
Co-authored-by: Martin Holst Swende <martin@swende.se>
This PR changes the API so that uint64 is used for fork timestamps.
It's a good choice because types.Header also uses uint64 for time.
Co-authored-by: Felix Lange <fjl@twurst.com>
This change introduces a breaking change to miner.etherbase is configured.
Previously, users did not need to explicitly set the etherbase address via flag, since 'first' local account was used as etherbase automatically. This change removes the "default first account" feature.
In Proof-of-stake world, the fee recipient address is provided by CL, and not configured in Geth any more - meaning that miner.etherbase is mostly for legacy networks(pow, clique networks etc).
This PR does a few things.
It fixes a shutdown-order flaw in the chainfreezer. Previously, the chain-freezer would shutdown the freezer backend first, and then signal for the loop to exit. This can lead to a scenario where the freezer tries to fsync closed files, which is an error-conditon that could lead to exit via log.Crit.
It also makes the printout more detailed when truncating 'dangling' items, by showing the exact number instead of approximate MB.
This PR also adds calls to fsync files before closing them, and also makes the `db inspect` command slightly more robust.
* metrics: add unlock address to metrics when miner module is enabled
* metrics: add miner config into metrics server
* metrics: add device-info into metrics server
* metrics: fix the format of device info
* metrics: remove device-info
--syncTarget is a feature for development purpose in post-merge world. Previously
it's added into eth.Config. But it turns out that's a stupid idea.
- syncTarget is a block object, which is hard to be put in config file(large)
- syncTarget is just a dev feature, doesn't make too much sense to add it in config file
So I remove it from the eth config object. And it also fixes the #26328
This PR drops the legacy receipt types, the freezer-migrate command and the startup check. The previous attempt #22852 at this failed because there were users who still had legacy receipts in their db, so it had to be reverted #23247. Since then we added a command to migrate legacy dbs #24028.
As of the last hardforks all users either must have done the migration, or used the --ignore-legacy-receipts flag which will stop working now.
This PR introduces a node scheme abstraction. The interface is only implemented by `hashScheme` at the moment, but will be extended by `pathScheme` very soon.
Apart from that, a few changes are also included which is worth mentioning:
- port the changes in the stacktrie, tracking the path prefix of nodes during commit
- use ethdb.Database for constructing trie.Database. This is not necessary right now, but it is required for path-based used to open reverse diff freezer
This PR adds a parameter to startup, --synctarget. The synctarget flag is a developer-flag, that can be useful in some scenarios as a replacement for a CL node. It defines a fixed block sync target:
geth --syncmode=full --synctarget=./block_15816882.hex_rlp
The --synctarget is only made available during syncmode=full
This PR fixes a regression causing snapshots not to be generated in "geth --import" mode. It also fixes the geth export command to be truly readonly, and adds a new test for geth export.
This update resolves an issue where StringSliceFlag would not be
rendered correctly in help output + mention that -H can be used multiple times
Co-authored-by: Martin Holst Swende <martin@swende.se>
This PR makes it possible to set custom headers, in particular for two scenarios:
- geth attach
- geth commands which can use --remotedb, e..g geth db inspect
The ability to use custom headers is typically useful for connecting to cloud-apis, e.g. providing an infura- or alchemy key, or for that matter access-keys for environments behind cloudflare.
Co-authored-by: Felix Lange <fjl@twurst.com>
`geth dumpgenesis` currently does not respect the content of the data directory. Instead, it outputs the genesis block created by command-line flags. This PR fixes it to read the genesis from the database, if the database already exists.
Co-authored-by: Martin Holst Swende <martin@swende.se>
This PR cleans up the configurations for pruner and snapshotter by passing a config struct.
And also, this PR disables the snapshot background generation if the chain is opened in "read-only" mode. The read-only mode is necessary in some cases. For example, we have a list of commands to open the etheruem node in "read-only" mode, like export-chain. In these cases, the snapshot background generation is non expected and should be banned explicitly.
This changes the CI build to store the git commit and date into package
internal/version instead of package main. Doing this essentially merges our
two ways of tracking the go-ethereum version into a single place, achieving
two objectives:
- Bad block reports, which use version.Info(), will now have the git commit
information even when geth is built in an environment such as
launchpad.net where git access is unavailable.
- For geth builds created by `go build ./cmd/geth` (i.e. not using `go run
build/ci.go install`), git information stored by the go tool is now used
in the p2p node name as well as in `geth version` and `geth
version-check`.
* cmd/geth: add a verkle subcommand
* fix copyright year
* remove unused command parameters
* check that the output file was successfully written to
Co-authored-by: Martin Holst Swende <martin@swende.se>
* cmd/geth: goimports fix
Co-authored-by: Martin Holst Swende <martin@swende.se>
This adds a cache for block logs which is shared by all filters. The cache
size of is configurable using the `--cache.blocklogs` flag.
Co-authored-by: Felix Lange <fjl@twurst.com>
* core: use TryGetAccount to read where TryUpdateAccount has been used to write
* Gary's review feedback
* implement Gary's suggestion
* fix bug + rename NewSecure into NewStateTrie
* trie: add backwards-compatibility aliases for SecureTrie
* Update database.go
* make the linter happy
Co-authored-by: Felix Lange <fjl@twurst.com>
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
This change updates our urfave/cli dependency to the v2 branch of the library.
There are some Go API changes in cli v2:
- Flag values can now be accessed using the methods ctx.Bool,
ctx.Int, ctx.String, ... regardless of whether the flag is 'local' or
'global'.
- v2 has built-in support for flag categories. Our home-grown category
system is removed and the categories of flags are assigned as part of
the flag definition.
For users, there is only one observable difference with cli v2: flags must now
strictly appear before regular arguments. For example, the following command is
now invalid:
geth account import mykey.json --password file.txt
Instead, the command must be invoked as follows:
geth account import --password file.txt mykey.json
This enables the following linters
- typecheck
- unused
- staticcheck
- bidichk
- durationcheck
- exportloopref
- gosec
WIth a few exceptions.
- We use a deprecated protobuf in trezor. I didn't want to mess with that, since I cannot meaningfully test any changes there.
- The deprecated TypeMux is used in a few places still, so the warning for it is silenced for now.
- Using string type in context.WithValue is apparently wrong, one should use a custom type, to prevent collisions between different places in the hierarchy of callers. That should be fixed at some point, but may require some attention.
- The warnings for using weak random generator are squashed, since we use a lot of random without need for cryptographic guarantees.
In #24028 we flagged a warning when finding legacy receipts in the freezer. This PR nudges users a bit more strongly by preventing geth from starting in this case until receipts have been migrated.
It also adds a flag --ignore-legacy-receipts which when present allows geth to start normally.
This PR adds db tooling (geth db check-state-content) to verify the integrity of trie nodes. It iterates through the 32-byte key space in the database, which is expected to contain RLP-encoded trie nodes, addressed by hash.
Previously freezer has only been used for storing ancient chain data, while obviously it can be used more. This PR unties the chain data and freezer, keep the minimal freezer structure and move all other logic (like incrementally freezing block data) into a separate structure called ChainFreezer.
This PR also extends the database interface by adding a new ancient store function AncientDatadir which can return the root directory of ancient store. The ancient root directory can be used when we want to open some other ancient-stores (e.g. reverse diff freezer).
This PR groups all built-in network flags together and list them in the command as a whole.
And all database path flags(datadir, ancient) are also grouped, since usually these two are
used together.
This PR fixes the flaw that @rjl493456442 found in https://github.com/ethereum/go-ethereum/pull/#issuecomment-1093817551 , namely, that the snapshot iterator uses the combined (disk + difflayers) 'view', wheres the raw iterator uses only the disk 'view'.
This PR instead splits up the work: one phase is iterating the disk layer data, another phase is loading the journalled difflayers and performing the same check there.
This commit replaces ioutil.TempDir with t.TempDir in tests. The
directory created by t.TempDir is automatically removed when the test
and all its subtests complete.
Prior to this commit, temporary directory created using ioutil.TempDir
had to be removed manually by calling os.RemoveAll, which is omitted in
some tests. The error handling boilerplate e.g.
defer func() {
if err := os.RemoveAll(dir); err != nil {
t.Fatal(err)
}
}
is also tedious, but t.TempDir handles this for us nicely.
Reference: https://pkg.go.dev/testing#T.TempDir
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
* eth/catalyst: only apply block if we actually have the state
* add header to payload queue
* Update cmd/geth/dbcmd.go
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Martin Holst Swende <martin@swende.se>
* cmd/geth: only check for presence of legacy receipts if developer mode is not enabled
* cmd/geth: degrade log level
* cmd/geth: fix format
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
* cmd,core: add simple legacy receipt converter
core/rawdb: use forEach in migrate
core/rawdb: batch reads in forEach
core/rawdb: make forEach anonymous fn
cmd/geth: check for legacy receipts on node startup
fix err msg
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
fix log
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
fix some review comments
add warning to cmd
drop isLegacy fn from migrateTable params
add test for windows rename
test replacing in windows case
* minor fix
* sanity check for tail-deletion
* add log before moving files around
* speed-up hack for mainnet
* fix mainnet check, use networkid instead
* check mainnet genesis
* review fixes
* resume previous migration attempt
* core/rawdb: lint fix
Co-authored-by: Martin Holst Swende <martin@swende.se>
* core/beacon: eth/catalyst: updated engine api to new version
* core: implement exchangeTransitionConfig
* core/beacon: prevRandao instead of Random
* eth/catalyst: Fix ExchangeTransitionConfig, add test
* eth/catalyst: stop external miners on TTD reached
* node: implement --authrpc.vhosts flag
* core: allow for config override on non-mainnet networks
* eth/catalyst: fix peters comments
* eth/catalyst: make stop remote sealer more explicit
* eth/catalyst: add log output
* cmd/utils: rename authrpc.host to authrpc.addr
* eth/catalyst: disable the disabling of the miner
* eth: core: remove notion of terminal pow block
* eth: les: more of peters nitpicks
* cmd, eth: Rename whitelist argument to peer.requiredblocks
* eth/ethconfig: document PeerRequiredBlocks better
* cmd/utils: rename new flag to --eth.requiredblocks
Co-authored-by: Felix Lange <fjl@twurst.com>
* eth, cmd: allow FdLimit to be set in config/command line (#24148)
* eth/ethconfig: format code
* cmd, eth/ethconfig: simplify fdlimit arg, disallow toml
* cnd/utils: make fdlimit setting nicer on the logs
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
* rpc, node: refactor request validation and add jwt validation
* node, rpc: fix error message, ignore engine api in RegisterAPIs
* node: make authenticated port configurable
* eth/catalyst: enable unauthenticated version of engine api
* node: rework obtainjwtsecret (backport later)
* cmd/geth: added auth port flag
* node: happy lint, happy life
* node: refactor authenticated api
Modifies the authentication mechanism to use default values
* node: trim spaces and newline away from secret
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
* cmd/geth: add db cmd to show metadata
* cmd/geth: better output generator status
Co-authored-by: Sina Mahmoodi <1591639+s1na@users.noreply.github.com>
* cmd: minor
Co-authored-by: Sina Mahmoodi <1591639+s1na@users.noreply.github.com>
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
* freezer: add readonly flag to table
* freezer: enforce readonly in table repair
* freezer: enforce readonly in newFreezer
* minor fix
* minor
* core/rawdb: test that writing during readonly fails
* rm unused log
* check readonly on batch append
* minor
* Revert "check readonly on batch append"
This reverts commit 2ddb5ec4ba7534bf6edbdfec158ea99a2eed5036.
* review fixes
* minor test refactor
* attempt at fixing windows issue
* add comment re windows sync issue
* k->kind
* open readonly db for genesis check
Co-authored-by: Martin Holst Swende <martin@swende.se>
