This changes moves the tracking of "deleted in this block" out from snap-only domain, so that it happens regardless of whether the execution is snapshot-backed or trie-backed.
This changes the StorageTrie method to return an error when the trie
is not available. It used to return an 'empty trie' in this case, but that's
not possible anymore under PBSS.
This PR builds on #26299, but also updates the tests to the most recent version, which includes tests regarding TheMerge.
This change adds checks to the beacon consensus engine, making it more strict in validating the pre- and post-headers, and not relying on the caller to have already correctly sanitized the headers/blocks.
This PR implements resettable freezer by adding a ResettableFreezer wrapper.
The resettable freezer wraps the original freezer in a way that makes it possible to ensure atomic resets. Implementation wise, it relies on the os.Rename and os.RemoveAll to atomically delete the original freezer data and re-create a new one from scratch.
A comment suggests that contract creation happens if the recipient of a call is 0x00..00 ("zero address") but in fact the sender must be nil. The zero address is a regular valid address that is commonly used as a "burn" address.
While investigating another issue, I found that all callers of collectLogs have the
complete block available. rawdb.ReadReceipts loads the block from the database,
so it is better to use ReadRawReceipts here, and derive the receipt information using
the block which is already in memory.
This PR makes it possible to modify the flush interval time via RPC. On one extreme, `0s`, it would act as an archive node. If set to `1h`, means that after one hour of effective block processing time, the trie would be flushed. If one block takes 200ms, this means that a flush would occur every `5*3600=18000` blocks -- however, if the memory size of the cached states grows too large, it will flush sooner.
Essentially, this makes it possible to configure the node to be more or less "archive:ish", and without restarting the node while reconfiguring it.
The gcproc field tracks the amount of time spent processing blocks,
and is used to trigger a state flush to disk when a certain threshold is
reached. After the merge, single block insertion by CL is the most
common source of block processing time, but this time was not added
into gcproc.
This removes the 'time' field from logs, as well as from the tracer interface. This change makes the trace output deterministic. If a tracer needs the time they can measure it themselves. No need for evm to do this.
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
This changes the Pop method to assign the zero value before
reducing slice size. Doing so ensures the backing array does not
reference removed item values.
This PR drops the legacy receipt types, the freezer-migrate command and the startup check. The previous attempt #22852 at this failed because there were users who still had legacy receipts in their db, so it had to be reverted #23247. Since then we added a command to migrate legacy dbs #24028.
As of the last hardforks all users either must have done the migration, or used the --ignore-legacy-receipts flag which will stop working now.
This PR introduces a node scheme abstraction. The interface is only implemented by `hashScheme` at the moment, but will be extended by `pathScheme` very soon.
Apart from that, a few changes are also included which is worth mentioning:
- port the changes in the stacktrie, tracking the path prefix of nodes during commit
- use ethdb.Database for constructing trie.Database. This is not necessary right now, but it is required for path-based used to open reverse diff freezer
While investigating #22374, I noticed that the Sync operation of the
freezer does not take the table lock. It also doesn't call sync for all files
if there is an error with one of them. I doubt this will fix anything, but
didn't want to drop the fix on the floor either.
It seems there is no fully typed library implementation of an LRU cache.
So I wrote one. Method names are the same as github.com/hashicorp/golang-lru,
and the new type can be used as a drop-in replacement.
Two reasons to do this:
- It's much easier to understand what a cache is for when the types are right there.
- Performance: the new implementation is slightly faster and performs zero memory
allocations in Add when the cache is at capacity. Overall, memory usage of the cache
is much reduced because keys are values are no longer wrapped in interface.
When the interpreter is configured to use extra-eips, this change makes it so that all the opcodes are deep-copied, to prevent accidental modification of the 'base' jumptable.
Closes: #26136
Co-authored-by: Martin Holst Swende <martin@swende.se>
This PR changes geth to read the eip1559 params from the chain config instead of the globals.
This way the parameters may be changed by forking the chain config code, without creating a large diff throughout the past and future usages of the parameters.
Co-authored-by: Martin Holst Swende <martin@swende.se>
This PR ports a few changes from PBSS:
- Fix the snapshot generator waiter in case the generation is not even initialized
- Refactor db inspector for ancient store
This PR fixes a regression causing snapshots not to be generated in "geth --import" mode. It also fixes the geth export command to be truly readonly, and adds a new test for geth export.
This adds a
* core/vm, tests: optimized modexp + fuzzer
* common/math: modexp optimizations
* core/vm: special case base 1 in big modexp
* core/vm: disable fastexp
This changes the error message for mismatching chain ID to show
the given and expected value. Callers expecting this error must be
changed to use errors.Is.
* ethclient/gethclient: improve time-sensitive flaky test
* eth/catalyst: fix (?) flaky test
* core: stop blockchains in tests after use
* core: fix dangling blockchain instances
* core: rm whitespace
* eth/gasprice, eth/tracers, consensus/clique: stop dangling blockchains in tests
* all: address review concerns
* core: goimports
* eth/catalyst: fix another time-sensitive test
* consensus/clique: add snapshot test run function
* core: rename stop() to stopWithoutSaving()
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR reworks tx indexer a bit. Compared to the original version, one scenario is no longer handled - upgrading from legacy geth without indexer support.
The tx indexer was introduced in 2020 and have been present through hardforks, so it can be assumed that all Geth nodes have tx indexer already. So we can simplify the tx indexer logic a bit:
- If the tail flag is not present, it means node is just initialized may or may not with an ancient store attached. In this case all blocks are regarded as unindexed
- If the tail flag is present, it means blocks below tail are unindexed, blocks above tail are indexed
This change also address some weird cornercases that could make the indexer not work after a crash.
`geth dumpgenesis` currently does not respect the content of the data directory. Instead, it outputs the genesis block created by command-line flags. This PR fixes it to read the genesis from the database, if the database already exists.
Co-authored-by: Martin Holst Swende <martin@swende.se>
This PR cleans up the configurations for pruner and snapshotter by passing a config struct.
And also, this PR disables the snapshot background generation if the chain is opened in "read-only" mode. The read-only mode is necessary in some cases. For example, we have a list of commands to open the etheruem node in "read-only" mode, like export-chain. In these cases, the snapshot background generation is non expected and should be banned explicitly.
core/blockchain: downgrade tx indexing and unindexing logs from info to debug
If a user has a finite tx lookup limit, they will see an "unindexing" info level log each time a block is imported. This information might help a user understand that they are removing the index each block and some txs may not be retrievable by hash, but overall it is generally more of a nuisance than a benefit. This change downgrades the log to a debug log.
This shortens the chain config summary in bad block reports,
and adds go-ethereum version information as well.
Co-authored-by: Felix Lange <fjl@twurst.com>
This changes the CI / release builds to use the latest Go version. It also
upgrades golangci-lint to a newer version compatible with Go 1.19.
In Go 1.19, godoc has gained official support for links and lists. The
syntax for code blocks in doc comments has changed and now requires a
leading tab character. gofmt adapts comments to the new syntax
automatically, so there are a lot of comment re-formatting changes in this
PR. We need to apply the new format in order to pass the CI lint stage with
Go 1.19.
With the linter upgrade, I have decided to disable 'gosec' - it produces
too many false-positive warnings. The 'deadcode' and 'varcheck' linters
have also been removed because golangci-lint warns about them being
unmaintained. 'unused' provides similar coverage and we already have it
enabled, so we don't lose much with this change.
This PR makes the event-sending for deleted and new logs happen in batches, to prevent OOM situation due to large reorgs.
Co-authored-by: Felix Lange <fjl@twurst.com>
* core, trie: flush preimages to db on database close
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
* rename Close to CommitPreimages for clarity
* core, trie: nitpick fixes
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
This PR allows users to pass in a config object directly to the tracers. Previously only the struct logger was configurable.
It also adds an option to the call tracer which if enabled makes it ignore any subcall and collect only information about the top-level call. See #25419 for discussion.
The tracers will silently ignore if they are passed a config they don't care about.
* core: use TryGetAccount to read where TryUpdateAccount has been used to write
* Gary's review feedback
* implement Gary's suggestion
* fix bug + rename NewSecure into NewStateTrie
* trie: add backwards-compatibility aliases for SecureTrie
* Update database.go
* make the linter happy
Co-authored-by: Felix Lange <fjl@twurst.com>
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
* eth: support bubbling up bad blocks from sync to the engine API
* eth/catalyst: fix typo
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
* eth/catalyst: fix typo
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
* Update eth/catalyst/api.go
* eth/catalyst: when forgetting bad hashes, also forget descendants
* eth/catalyst: minor bad block tweaks for resilience
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Co-authored-by: Martin Holst Swende <martin@swende.se>
During RPC calls such as eth_call and eth_estimateGas, st.evm.Config.NoBaseFee is set
which allows the gas price to be below the base fee. This results the tip being negative,
and balance being subtracted from the coinbase instead of added to it, which results in a
potentially negative coinbase balance interestingly. This can't happen during normal chain
processing as outside of RPC calls the gas price is required to be at least the base fee,
as NoBaseFee is false.
This change prevents this behavior by disabling fee payment when the fee is not set.
Co-authored-by: lightclient@protonmail.com <lightclient@protonmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
* Remove locking in (*BlockChain).ExportN
Since ExportN is read-only, it shouldn't need the lock. (?)
* Add hash check to detect reorgs during export.
* fix check order
* Update blockchain.go
* Update blockchain.go
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
