* focus on performance improvement in many aspects.
1. Do BlockBody verification concurrently;
2. Do calculation of intermediate root concurrently;
3. Preload accounts before processing blocks;
4. Make the snapshot layers configurable.
5. Reuse some object to reduce GC.
add
* rlp: improve decoder stream implementation (#22858)
This commit makes various cleanup changes to rlp.Stream.
* rlp: shrink Stream struct
This removes a lot of unused padding space in Stream by reordering the
fields. The size of Stream changes from 120 bytes to 88 bytes. Stream
instances are internally cached and reused using sync.Pool, so this does
not improve performance.
* rlp: simplify list stack
The list stack kept track of the size of the current list context as
well as the current offset into it. The size had to be stored in the
stack in order to subtract it from the remaining bytes of any enclosing
list in ListEnd. It seems that this can be implemented in a simpler
way: just subtract the size from the enclosing list context in List instead.
* rlp: use atomic.Value for type cache (#22902)
All encoding/decoding operations read the type cache to find the
writer/decoder function responsible for a type. When analyzing CPU
profiles of geth during sync, I found that the use of sync.RWMutex in
cache lookups appears in the profiles. It seems we are running into
CPU cache contention problems when package rlp is heavily used
on all CPU cores during sync.
This change makes it use atomic.Value + a writer lock instead of
sync.RWMutex. In the common case where the typeinfo entry is present in
the cache, we simply fetch the map and lookup the type.
* rlp: optimize byte array handling (#22924)
This change improves the performance of encoding/decoding [N]byte.
name old time/op new time/op delta
DecodeByteArrayStruct-8 336ns ± 0% 246ns ± 0% -26.98% (p=0.000 n=9+10)
EncodeByteArrayStruct-8 225ns ± 1% 148ns ± 1% -34.12% (p=0.000 n=10+10)
name old alloc/op new alloc/op delta
DecodeByteArrayStruct-8 120B ± 0% 48B ± 0% -60.00% (p=0.000 n=10+10)
EncodeByteArrayStruct-8 0.00B 0.00B ~ (all equal)
* rlp: optimize big.Int decoding for size <= 32 bytes (#22927)
This change grows the static integer buffer in Stream to 32 bytes,
making it possible to decode 256bit integers without allocating a
temporary buffer.
In the recent commit 088da24, Stream struct size decreased from 120
bytes down to 88 bytes. This commit grows the struct to 112 bytes again,
but the size change will not degrade performance because Stream
instances are internally cached in sync.Pool.
name old time/op new time/op delta
DecodeBigInts-8 12.2µs ± 0% 8.6µs ± 4% -29.58% (p=0.000 n=9+10)
name old speed new speed delta
DecodeBigInts-8 230MB/s ± 0% 326MB/s ± 4% +42.04% (p=0.000 n=9+10)
* eth/protocols/eth, les: avoid Raw() when decoding HashOrNumber (#22841)
Getting the raw value is not necessary to decode this type, and
decoding it directly from the stream is faster.
* fix testcase
* debug no lazy
* fix can not repair
* address comments
Co-authored-by: Felix Lange <fjl@twurst.com>
* eth/tracers: improve tracing performance (#23016)
Improves the performance of debug.traceTransaction
* Update the import order
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: John.H <john.h@binance.com>
* core/vm: implement AccessListTracer
* eth: implement debug.createAccessList
* core/vm: fixed nil panics in accessListTracer
* eth: better error messages for createAccessList
* eth: some fixes on CreateAccessList
* eth: allow for provided accesslists
* eth: pass accesslist by value
* eth: remove created acocunt from accesslist
* core/vm: simplify access list tracer
* core/vm: unexport accessListTracer
* eth: return best guess if al iteration times out
* eth: return best guess if al iteration times out
* core: docstring, unexport methods
* eth: typo
* internal/ethapi: move createAccessList to eth package
* internal/ethapi: remove reexec from createAccessList
* internal/ethapi: break if al is equal to last run, not if gas is equal
* internal/web3ext: fixed arguments
* core/types: fixed equality check for accesslist
* core/types: no hardcoded vals
* core, internal: simplify access list generation, make it precise
* core/vm: fix typo
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
This removes the duplicated definition of eth_chainID
in package eth and updates the definition in internal/ethapi
to treat chain ID as a bigint.
Co-authored-by: Felix Lange <fjl@twurst.com>
This adds support for EIP-2718 typed transactions as well as EIP-2930
access list transactions (tx type 1). These EIPs are scheduled for the
Berlin fork.
There very few changes to existing APIs in core/types, and several new APIs
to deal with access list transactions. In particular, there are two new
constructor functions for transactions: types.NewTx and types.SignNewTx.
Since the canonical encoding of typed transactions is not RLP-compatible,
Transaction now has new methods for encoding and decoding: MarshalBinary
and UnmarshalBinary.
The existing EIP-155 signer does not support the new transaction types.
All code dealing with transaction signatures should be updated to use the
newer EIP-2930 signer. To make this easier for future updates, we have
added new constructor functions for types.Signer: types.LatestSigner and
types.LatestSignerForChainID.
This change also adds support for the YoloV3 testnet.
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Felix Lange <fjl@twurst.com>
Co-authored-by: Ryan Schneider <ryanleeschneider@gmail.com>
This PR prevents users from submitting transactions without EIP-155 enabled. This behaviour can be overridden by specifying the flag --rpc.allow-unprotected-txs=true.
During the snap and eth refactor, the net_version rpc call was falsely deprecated.
This restores the net_version RPC handler as most eth2 nodes and other software
depend on it.
This commit splits the eth package, separating the handling of eth and snap protocols. It also includes the capability to run snap sync (https://github.com/ethereum/devp2p/blob/master/caps/snap.md) , but does not enable it by default.
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Co-authored-by: Martin Holst Swende <martin@swende.se>
ToHex was deprecated a couple years ago. The last remaining use
was in ToHexArray, which itself only had a single call site.
This just moves ToHexArray near its only remaining call site and
implements it using hexutil.Encode. This changes the default behaviour
of ToHexArray and with it the behaviour of eth_getProof. Previously we
encoded an empty slice as 0, now the empty slice is encoded as 0x.
This allows users to estimate gas on top of arbitrary blocks as well as pending and latest.
Tracing on pending is useful for most users as it takes into account the current txpool while
tracing on latest might be useful for users that have little to know knowledge of the current
transactions in the network.
If blockNrOrHash is not specified, estimateGas defaults to pending
This PR significantly changes the APIs for instantiating Ethereum nodes in
a Go program. The new APIs are not backwards-compatible, but we feel that
this is made up for by the much simpler way of registering services on
node.Node. You can find more information and rationale in the design
document: https://gist.github.com/renaynay/5bec2de19fde66f4d04c535fd24f0775.
There is also a new feature in Node's Go API: it is now possible to
register arbitrary handlers on the user-facing HTTP server. In geth, this
facility is used to enable GraphQL.
There is a single minor change relevant for geth users in this PR: The
GraphQL API is no longer available separately from the JSON-RPC HTTP
server. If you want GraphQL, you need to enable it using the
./geth --http --graphql flag combination.
The --graphql.port and --graphql.addr flags are no longer available.
This change introduces garbage collection for the light client. Historical
chain data is deleted periodically. If you want to disable the GC, use
the --light.nopruning flag.
* internal/ethapi: return revert reason for eth_call
* internal/ethapi: moved revert reason logic to doCall
* accounts/abi/bind/backends: added revert reason logic to simulated backend
* internal/ethapi: fixed linting error
* internal/ethapi: check if require reason can be unpacked
* internal/ethapi: better error logic
* internal/ethapi: simplify logic
* internal/ethapi: return vmError()
* internal/ethapi: move handling of revert out of docall
* graphql: removed revert logic until spec change
* rpc: internal/ethapi: added custom error types
* graphql: use returndata instead of return
Return() checks if there is an error. If an error is found, we return nil.
For most use cases it can be beneficial to return the output even if there
was an error. This code should be changed anyway once the spec supports
error reasons in graphql responses
* accounts/abi/bind/backends: added tests for revert reason
* internal/ethapi: add errorCode to revert error
* internal/ethapi: add errorCode of 3 to revertError
* internal/ethapi: unified estimateGasErrors, simplified logic
* internal/ethapi: unified handling of errors in DoEstimateGas
* rpc: print error data field
* accounts/abi/bind/backends: unify simulatedBackend and RPC
* internal/ethapi: added binary data to revertError data
* internal/ethapi: refactored unpacking logic into newRevertError
* accounts/abi/bind/backends: fix EstimateGas
* accounts, console, internal, rpc: minor error interface cleanups
* Revert "accounts, console, internal, rpc: minor error interface cleanups"
This reverts commit 2d3ef53c5304e429a04983210a417c1f4e0dafb7.
* re-apply the good parts of 2d3ef53c53
* rpc: add test for returning server error data from client
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
* accounts/abi/bind/backend, internal/ethapi: recap gas limit with balance
* accounts, internal: address comment and fix lint
* accounts, internal: extend log message
* tiny nits to format hexutil.Big and nil properly
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
* all: seperate consensus error and evm internal error
There are actually two types of error will be returned when
a tranaction/message call is executed: (a) consensus error
(b) evm internal error. The former should be converted to
a consensus issue, e.g. The sender doesn't enough asset to
purchase the gas it specifies. The latter is allowed since
evm itself is a blackbox and internal error is allowed to happen.
This PR emphasizes the difference by introducing a executionResult
structure. The evm error is embedded inside. So if any error
returned, it indicates consensus issue happens.
And also this PR improve the `EstimateGas` API to return the concrete
revert reason if the transaction always fails
* all: polish
* accounts/abi/bind/backends: add tests
* accounts/abi/bind/backends, internal: cleanup error message
* all: address comments
* core: fix lint
* accounts, core, eth, internal: address comments
* accounts, internal: resolve revert reason if possible
* accounts, internal: address comments
ToMessage is used to convert between ethapi.CallArgs and types.Message.
It reduces the length of the DoCall method by about half by abstracting out
the conversion between the CallArgs and the Message. This should improve the
code's maintainability and reusability.
Prior to this change, eth_call changed the balance of the sender account in the
EVM environment to 2^256 wei to cover the gas cost of the call execution.
We've had this behavior for a long time even though it's super confusing.
This commit sets the default call gasprice to zero instead of updating the balance,
which is better because it makes eth_call semantics less surprising. Removing
the built-in balance assignment also makes balance overrides work as expected.
This makes eth_call and eth_estimateGas use the zero address
as sender when the "from" parameter is not supplied.
Co-authored-by: Felix Lange <fjl@twurst.com>
