This PR adds a way to subscribe to the _full_ pending transactions, as opposed to just being notified about hashes.
In use cases where client subscribes to newPendingTransactions and gets txhashes only to then request the actual transaction, the caller can now shortcut that flow and obtain the transactions directly.
Co-authored-by: lx <92799281+brilliant-lx@users.noreply.github.com>
Co-authored-by: lmittmann <lmittmann@users.noreply.github.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
Enable following Berlin EIPs on BSC and introduce HertzBlock
** EIP-2565: ModExp Gas Cost
** EIP-2929: Gas cost increases for state access opcodes
** EIP-2718: Typed Transaction Envelope
** EIP-2930: Optional access lists
This removes the 'time' field from logs, as well as from the tracer interface. This change makes the trace output deterministic. If a tracer needs the time they can measure it themselves. No need for evm to do this.
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
This reverts commit b4f1cdffd55b7e27facec4d250009ad440d8ac74.
Revert because previous hardfork (berlin, london) need to be merged
first to avoid dependencies risk
* core/vm: deepcopy jumptable when enabling extra eips
When the interpreter is configured to use extra-eips,
this change makes it so that all the opcodes are deep-copied,
to prevent accidental modification of the 'base' jumptable.
Original-auther: yihuang <huang@crypto.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
* core/vm: implement EIP-3860: Limit and meter initcode
Implementation of https://eips.ethereum.org/EIPS/eip-3860, limit and meter initcode.
Most of this change takes the go-ethereum implementation as reference.
Original-author: Andrei Maiboroda <andrei@ethereum.org>
Co-authored-by: lightclient@protonmail.com <lightclient@protonmail.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
* core/vm: implement EIP-3855: PUSH0 instruction
* core/vm: Implement PUSH0
* Move PUSH0 to enable3855
* Add method doc
Original-author: Alex Beregszaszi <alex@rtfs.hu>
* core/vm: enable EIP-3855 (PUSH0) in Boneh
Original-author: Andrew Ashikhmin <34320705+yperbasis@users.noreply.github.com>
* core/vm: Fix issue of incorrect instructionSet used for jump_table
Also update the related test case for gas change.
* core/vm: fix test cases issues that not suitable for boneh
* core/vm: reuse ErrMaxInitCodeSizeExceeded as error message
---------
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: lightclient@protonmail.com <lightclient@protonmail.com>
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
* core/state: Remove prefetcher on stop
* core/blockchain: Wait for `triedb.Dereference` in `writeBlockWithState`
* eth/protocols/diff: Fix index mismatch in `TestGetDiffLayers`
* fix: p2p sync with lagging peer
no need to sync with lagging peer, which could make the local chain stalling as well.
* fix: do not drop lagging peer, will retry it later.
The lagging peer is probably already the best peer with largest total difficulty.
Shoule not remove it, since p2p is a bidirectional connection, drop it could make
the peer unable to sync with this peer as well.
And the lagging peer could catch up later, so keep it.
* p2p: add lagging field in Peer
lagging peer will be connected, but won't be used to sync.
the lagging flag can be clear once the Peer updates its latest block state.
* test: fix UT compile issue
* fix: lagging peer func rename
* test: fix a UT fail of download test
errStallingPeer is replaced by errLaggingPeer in this case
* fix: lagging issue in light mode
* test: add and resolve UT of lagging peer
* dep: upgrade secp256k1 to use btcec/v2 v2.3.2 and update insecurity pkg
* build ci: upgrade go to 1.19 and golangci-lint to 1.50.1
* docs: fix format that does not follow the goimports
* dep: redirect github.com/bnb-chain/tendermint to v0.31.13
* ci: disable GOPROXY
* eth: fix a rare datarace on CHT challenge reply / shutdown
* trie: check childrens' existence concurrently for snap heal
* eth/protocols/snap: fix problems due to idle-but-busy peers
* eth/filters: change filter block to be by-ref (#26054)
This PR changes the block field in the filter to be a pointer, to disambiguate between empty hash and no hash
* rpc: handle wrong HTTP batch response length (#26064)
* eth/protocols/snap: throttle trie heal requests when peers DoS us (#25666)
* eth/protocols/snap: throttle trie heal requests when peers DoS us
* eth/protocols/snap: lower heal throttle log to debug
Co-authored-by: Martin Holst Swende <martin@swende.se>
* eth/protocols/snap: fix comment
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Jordan Krage <jmank88@gmail.com>
This changes the []byte <-> Uint8Array conversion to use an
ArrayBuffer, avoiding inefficient copying of the slice data in Goja.
Co-authored-by: Felix Lange <fjl@twurst.com>
This change removes extraneous/unnecessary checks for equality
when comparing 2 accessList values A and B. Given that we validate that
their lengths of A and B are equal, if so and if every element in A is
in B, reflexively every element in B is already in A. If that weren't
the case and an element g existed in A but not in B, that would mean
that there is an extra element and hence a mathematical contradiction.
Fixes#24658
This change makes use of the new code generator rlp/rlpgen to improve the
performance of RLP encoding for Header and StateAccount. It also speeds up
encoding of ReceiptForStorage using the new rlp.EncoderBuffer API.
The change is much less transparent than I wanted it to be, because Header and
StateAccount now have an EncodeRLP method defined with pointer receiver. It
used to be possible to encode non-pointer values of these types, but the new
method prevents that and attempting to encode unadressable values (even if
part of another value) will return an error. The error can be surprising and may
pop up in places that previously didn't expect any errors.
To make things work, I also needed to update all code paths (mostly in unit tests)
that lead to encoding of non-pointer values, and pass a pointer instead.
Benchmark results:
name old time/op new time/op delta
EncodeRLP/legacy-header-8 328ns ± 0% 237ns ± 1% -27.63% (p=0.000 n=8+8)
EncodeRLP/london-header-8 353ns ± 0% 247ns ± 1% -30.06% (p=0.000 n=8+8)
EncodeRLP/receipt-for-storage-8 237ns ± 0% 123ns ± 0% -47.86% (p=0.000 n=8+7)
EncodeRLP/receipt-full-8 297ns ± 0% 301ns ± 1% +1.39% (p=0.000 n=8+8)
name old speed new speed delta
EncodeRLP/legacy-header-8 1.66GB/s ± 0% 2.29GB/s ± 1% +38.19% (p=0.000 n=8+8)
EncodeRLP/london-header-8 1.55GB/s ± 0% 2.22GB/s ± 1% +42.99% (p=0.000 n=8+8)
EncodeRLP/receipt-for-storage-8 38.0MB/s ± 0% 64.8MB/s ± 0% +70.48% (p=0.000 n=8+7)
EncodeRLP/receipt-full-8 910MB/s ± 0% 897MB/s ± 1% -1.37% (p=0.000 n=8+8)
name old alloc/op new alloc/op delta
EncodeRLP/legacy-header-8 0.00B 0.00B ~ (all equal)
EncodeRLP/london-header-8 0.00B 0.00B ~ (all equal)
EncodeRLP/receipt-for-storage-8 64.0B ± 0% 0.0B -100.00% (p=0.000 n=8+8)
EncodeRLP/receipt-full-8 320B ± 0% 320B ± 0% ~ (all equal)
