go-ethereum/swarm/network/stream/delivery_test.go

594 lines
17 KiB
Go
Raw Normal View History

2018-06-20 15:06:27 +03:00
// Copyright 2018 The go-ethereum Authors
// This file is part of the go-ethereum library.
//
// The go-ethereum library is free software: you can redistribute it and/or modify
// it under the terms of the GNU Lesser General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// The go-ethereum library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU Lesser General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public License
// along with the go-ethereum library. If not, see <http://www.gnu.org/licenses/>.
package stream
import (
"bytes"
"context"
"errors"
2018-06-20 15:06:27 +03:00
"fmt"
"sync"
"testing"
"time"
"github.com/ethereum/go-ethereum/node"
"github.com/ethereum/go-ethereum/p2p"
"github.com/ethereum/go-ethereum/p2p/enode"
"github.com/ethereum/go-ethereum/p2p/protocols"
"github.com/ethereum/go-ethereum/p2p/simulations/adapters"
2018-06-20 15:06:27 +03:00
p2ptest "github.com/ethereum/go-ethereum/p2p/testing"
"github.com/ethereum/go-ethereum/swarm/chunk"
2018-06-20 15:06:27 +03:00
"github.com/ethereum/go-ethereum/swarm/log"
"github.com/ethereum/go-ethereum/swarm/network"
pq "github.com/ethereum/go-ethereum/swarm/network/priorityqueue"
"github.com/ethereum/go-ethereum/swarm/network/simulation"
"github.com/ethereum/go-ethereum/swarm/state"
2018-06-20 15:06:27 +03:00
"github.com/ethereum/go-ethereum/swarm/storage"
"github.com/ethereum/go-ethereum/swarm/testutil"
2018-06-20 15:06:27 +03:00
)
//Test requesting a chunk from a peer then issuing a "empty" OfferedHashesMsg (no hashes available yet)
//Should time out as the peer does not have the chunk (no syncing happened previously)
2018-06-20 15:06:27 +03:00
func TestStreamerUpstreamRetrieveRequestMsgExchangeWithoutStore(t *testing.T) {
tester, _, _, teardown, err := newStreamerTester(&RegistryOptions{
Syncing: SyncingDisabled, //do no syncing
})
2018-06-20 15:06:27 +03:00
if err != nil {
t.Fatal(err)
}
swarm: fix network/stream data races (#19051) * swarm/network/stream: newStreamerTester cleanup only if err is nil * swarm/network/stream: raise newStreamerTester waitForPeers timeout * swarm/network/stream: fix data races in GetPeerSubscriptions * swarm/storage: prevent data race on LDBStore.batchesC https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461775049 * swarm/network/stream: fix TestGetSubscriptionsRPC data race https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461768477 * swarm/network/stream: correctly use Simulation.Run callback https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461783804 * swarm/network: protect addrCountC in Kademlia.AddrCountC function https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462273444 * p2p/simulations: fix a deadlock calling getRandomNode with lock https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462317407 * swarm/network/stream: terminate disconnect goruotines in tests * swarm/network/stream: reduce memory consumption when testing data races * swarm/network/stream: add watchDisconnections helper function * swarm/network/stream: add concurrent counter for tests * swarm/network/stream: rename race/norace test files and use const * swarm/network/stream: remove watchSim and its panic * swarm/network/stream: pass context in watchDisconnections * swarm/network/stream: add concurrent safe bool for watchDisconnections * swarm/storage: fix LDBStore.batchesC data race by not closing it
2019-02-13 15:03:23 +03:00
defer teardown()
2018-06-20 15:06:27 +03:00
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
node := tester.Nodes[0]
2018-06-20 15:06:27 +03:00
chunk := storage.NewChunk(storage.Address(hash0[:]), nil)
//test the exchange
2018-06-20 15:06:27 +03:00
err = tester.TestExchanges(p2ptest.Exchange{
Label: "RetrieveRequestMsg",
Triggers: []p2ptest.Trigger{
{ //then the actual RETRIEVE_REQUEST....
2018-06-20 15:06:27 +03:00
Code: 5,
Msg: &RetrieveRequestMsg{
Addr: chunk.Address()[:],
2018-06-20 15:06:27 +03:00
},
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
Peer: node.ID(),
2018-06-20 15:06:27 +03:00
},
},
Expects: []p2ptest.Expect{
{ //to which the peer responds with offered hashes
2018-06-20 15:06:27 +03:00
Code: 1,
Msg: &OfferedHashesMsg{
HandoverProof: nil,
Hashes: nil,
From: 0,
To: 0,
},
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
Peer: node.ID(),
2018-06-20 15:06:27 +03:00
},
},
})
//should fail with a timeout as the peer we are requesting
//the chunk from does not have the chunk
expectedError := `exchange #0 "RetrieveRequestMsg": timed out`
2018-06-20 15:06:27 +03:00
if err == nil || err.Error() != expectedError {
t.Fatalf("Expected error %v, got %v", expectedError, err)
}
}
// upstream request server receives a retrieve Request and responds with
// offered hashes or delivery if skipHash is set to true
func TestStreamerUpstreamRetrieveRequestMsgExchange(t *testing.T) {
tester, _, localStore, teardown, err := newStreamerTester(&RegistryOptions{
Syncing: SyncingDisabled,
})
2018-06-20 15:06:27 +03:00
if err != nil {
t.Fatal(err)
}
swarm: fix network/stream data races (#19051) * swarm/network/stream: newStreamerTester cleanup only if err is nil * swarm/network/stream: raise newStreamerTester waitForPeers timeout * swarm/network/stream: fix data races in GetPeerSubscriptions * swarm/storage: prevent data race on LDBStore.batchesC https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461775049 * swarm/network/stream: fix TestGetSubscriptionsRPC data race https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461768477 * swarm/network/stream: correctly use Simulation.Run callback https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461783804 * swarm/network: protect addrCountC in Kademlia.AddrCountC function https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462273444 * p2p/simulations: fix a deadlock calling getRandomNode with lock https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462317407 * swarm/network/stream: terminate disconnect goruotines in tests * swarm/network/stream: reduce memory consumption when testing data races * swarm/network/stream: add watchDisconnections helper function * swarm/network/stream: add concurrent counter for tests * swarm/network/stream: rename race/norace test files and use const * swarm/network/stream: remove watchSim and its panic * swarm/network/stream: pass context in watchDisconnections * swarm/network/stream: add concurrent safe bool for watchDisconnections * swarm/storage: fix LDBStore.batchesC data race by not closing it
2019-02-13 15:03:23 +03:00
defer teardown()
2018-06-20 15:06:27 +03:00
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
node := tester.Nodes[0]
hash := storage.Address(hash1[:])
ch := storage.NewChunk(hash, hash1[:])
_, err = localStore.Put(context.TODO(), chunk.ModePutUpload, ch)
if err != nil {
t.Fatalf("Expected no err got %v", err)
}
2018-06-20 15:06:27 +03:00
err = tester.TestExchanges(p2ptest.Exchange{
Label: "RetrieveRequestMsg",
Triggers: []p2ptest.Trigger{
{
Code: 5,
Msg: &RetrieveRequestMsg{
Addr: hash,
},
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
Peer: node.ID(),
2018-06-20 15:06:27 +03:00
},
},
Expects: []p2ptest.Expect{
{
Code: 6,
Msg: &ChunkDeliveryMsg{
Addr: ch.Address(),
SData: ch.Data(),
2018-06-20 15:06:27 +03:00
},
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
Peer: node.ID(),
2018-06-20 15:06:27 +03:00
},
},
})
if err != nil {
t.Fatal(err)
}
}
// if there is one peer in the Kademlia, RequestFromPeers should return it
func TestRequestFromPeers(t *testing.T) {
dummyPeerID := enode.HexID("3431c3939e1ee2a6345e976a8234f9870152d64879f30bc272a074f6859e75e8")
addr := network.RandomAddr()
to := network.NewKademlia(addr.OAddr, network.NewKadParams())
delivery := NewDelivery(to, nil)
protocolsPeer := protocols.NewPeer(p2p.NewPeer(dummyPeerID, "dummy", nil), nil, nil)
peer := network.NewPeer(&network.BzzPeer{
BzzAddr: network.RandomAddr(),
LightNode: false,
Peer: protocolsPeer,
}, to)
to.On(peer)
r := NewRegistry(addr.ID(), delivery, nil, nil, nil, nil)
// an empty priorityQueue has to be created to prevent a goroutine being called after the test has finished
sp := &Peer{
2019-04-30 10:28:46 +03:00
BzzPeer: &network.BzzPeer{Peer: protocolsPeer, BzzAddr: addr},
pq: pq.New(int(PriorityQueue), PriorityQueueCap),
streamer: r,
}
r.setPeer(sp)
req := network.NewRequest(
storage.Address(hash0[:]),
true,
&sync.Map{},
)
ctx := context.Background()
id, _, err := delivery.RequestFromPeers(ctx, req)
if err != nil {
t.Fatal(err)
}
if *id != dummyPeerID {
t.Fatalf("Expected an id, got %v", id)
}
}
// RequestFromPeers should not return light nodes
func TestRequestFromPeersWithLightNode(t *testing.T) {
dummyPeerID := enode.HexID("3431c3939e1ee2a6345e976a8234f9870152d64879f30bc272a074f6859e75e8")
addr := network.RandomAddr()
to := network.NewKademlia(addr.OAddr, network.NewKadParams())
delivery := NewDelivery(to, nil)
protocolsPeer := protocols.NewPeer(p2p.NewPeer(dummyPeerID, "dummy", nil), nil, nil)
// setting up a lightnode
peer := network.NewPeer(&network.BzzPeer{
BzzAddr: network.RandomAddr(),
LightNode: true,
Peer: protocolsPeer,
}, to)
to.On(peer)
r := NewRegistry(addr.ID(), delivery, nil, nil, nil, nil)
// an empty priorityQueue has to be created to prevent a goroutine being called after the test has finished
sp := &Peer{
2019-04-30 10:28:46 +03:00
BzzPeer: &network.BzzPeer{Peer: protocolsPeer, BzzAddr: addr},
pq: pq.New(int(PriorityQueue), PriorityQueueCap),
streamer: r,
}
r.setPeer(sp)
req := network.NewRequest(
storage.Address(hash0[:]),
true,
&sync.Map{},
)
ctx := context.Background()
// making a request which should return with "no peer found"
_, _, err := delivery.RequestFromPeers(ctx, req)
expectedError := "no peer found"
if err.Error() != expectedError {
t.Fatalf("expected '%v', got %v", expectedError, err)
}
}
2018-06-20 15:06:27 +03:00
func TestStreamerDownstreamChunkDeliveryMsgExchange(t *testing.T) {
tester, streamer, localStore, teardown, err := newStreamerTester(&RegistryOptions{
Syncing: SyncingDisabled,
})
2018-06-20 15:06:27 +03:00
if err != nil {
t.Fatal(err)
}
swarm: fix network/stream data races (#19051) * swarm/network/stream: newStreamerTester cleanup only if err is nil * swarm/network/stream: raise newStreamerTester waitForPeers timeout * swarm/network/stream: fix data races in GetPeerSubscriptions * swarm/storage: prevent data race on LDBStore.batchesC https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461775049 * swarm/network/stream: fix TestGetSubscriptionsRPC data race https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461768477 * swarm/network/stream: correctly use Simulation.Run callback https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461783804 * swarm/network: protect addrCountC in Kademlia.AddrCountC function https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462273444 * p2p/simulations: fix a deadlock calling getRandomNode with lock https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462317407 * swarm/network/stream: terminate disconnect goruotines in tests * swarm/network/stream: reduce memory consumption when testing data races * swarm/network/stream: add watchDisconnections helper function * swarm/network/stream: add concurrent counter for tests * swarm/network/stream: rename race/norace test files and use const * swarm/network/stream: remove watchSim and its panic * swarm/network/stream: pass context in watchDisconnections * swarm/network/stream: add concurrent safe bool for watchDisconnections * swarm/storage: fix LDBStore.batchesC data race by not closing it
2019-02-13 15:03:23 +03:00
defer teardown()
2018-06-20 15:06:27 +03:00
streamer.RegisterClientFunc("foo", func(p *Peer, t string, live bool) (Client, error) {
return &testClient{
t: t,
}, nil
})
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
node := tester.Nodes[0]
2018-06-20 15:06:27 +03:00
//subscribe to custom stream
2018-06-20 15:06:27 +03:00
stream := NewStream("foo", "", true)
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
err = streamer.Subscribe(node.ID(), stream, NewRange(5, 8), Top)
2018-06-20 15:06:27 +03:00
if err != nil {
t.Fatalf("Expected no error, got %v", err)
}
chunkKey := hash0[:]
chunkData := hash1[:]
err = tester.TestExchanges(p2ptest.Exchange{
Label: "Subscribe message",
Expects: []p2ptest.Expect{
{ //first expect subscription to the custom stream...
2018-06-20 15:06:27 +03:00
Code: 4,
Msg: &SubscribeMsg{
Stream: stream,
History: NewRange(5, 8),
Priority: Top,
},
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
Peer: node.ID(),
2018-06-20 15:06:27 +03:00
},
},
},
p2ptest.Exchange{
Label: "ChunkDelivery message",
2018-06-20 15:06:27 +03:00
Triggers: []p2ptest.Trigger{
{ //...then trigger a chunk delivery for the given chunk from peer in order for
//local node to get the chunk delivered
2018-06-20 15:06:27 +03:00
Code: 6,
Msg: &ChunkDeliveryMsg{
Addr: chunkKey,
SData: chunkData,
},
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
Peer: node.ID(),
2018-06-20 15:06:27 +03:00
},
},
})
if err != nil {
t.Fatalf("Expected no error, got %v", err)
}
ctx, cancel := context.WithTimeout(context.Background(), 2*time.Second)
defer cancel()
// wait for the chunk to get stored
storedChunk, err := localStore.Get(ctx, chunk.ModeGetRequest, chunkKey)
for err != nil {
select {
case <-ctx.Done():
t.Fatalf("Chunk is not in localstore after timeout, err: %v", err)
default:
}
storedChunk, err = localStore.Get(ctx, chunk.ModeGetRequest, chunkKey)
time.Sleep(50 * time.Millisecond)
2018-06-20 15:06:27 +03:00
}
if err != nil {
t.Fatalf("Expected no error, got %v", err)
}
if !bytes.Equal(storedChunk.Data(), chunkData) {
2018-06-20 15:06:27 +03:00
t.Fatal("Retrieved chunk has different data than original")
}
}
func TestDeliveryFromNodes(t *testing.T) {
testDeliveryFromNodes(t, 2, dataChunkCount, true)
testDeliveryFromNodes(t, 2, dataChunkCount, false)
testDeliveryFromNodes(t, 4, dataChunkCount, true)
testDeliveryFromNodes(t, 4, dataChunkCount, false)
Ci race detector handle failing tests (#19143) * swarm/storage: increase mget timeout in common_test.go TestDbStoreCorrect_1k sometimes timed out with -race on Travis. --- FAIL: TestDbStoreCorrect_1k (24.63s) common_test.go:194: testStore failed: timed out after 10s * swarm: remove unused vars from TestSnapshotSyncWithServer nodeCount and chunkCount is returned from setupSim and those values we use. * swarm: move race/norace helpers from stream to testutil As we will need to use the flag in other packages, too. * swarm: refactor TestSwarmNetwork case Extract long running test cases for better visibility. * swarm/network: skip TestSyncingViaGlobalSync with -race As panics on Travis. panic: runtime error: invalid memory address or nil pointer dereference [signal SIGSEGV: segmentation violation code=0x1 addr=0x0 pc=0x7e351b] * swarm: run TestSwarmNetwork with fewer nodes with -race As otherwise we always get test failure with `network_test.go:374: context deadline exceeded` even with raised `Timeout`. * swarm/network: run TestDeliveryFromNodes with fewer nodes with -race Test on Travis times out with 8 or more nodes if -race flag is present. * swarm/network: smaller node count for discovery tests with -race TestDiscoveryPersistenceSimulationSimAdapters failed on Travis with `-race` flag present. The failure was due to extensive memory usage, coming from the CGO runtime. Using a smaller node count resolves the issue. === RUN TestDiscoveryPersistenceSimulationSimAdapter ==7227==ERROR: ThreadSanitizer failed to allocate 0x80000 (524288) bytes of clock allocator (error code: 12) FATAL: ThreadSanitizer CHECK failed: ./gotsan.cc:6976 "((0 && "unable to mmap")) != (0)" (0x0, 0x0) FAIL github.com/ethereum/go-ethereum/swarm/network/simulations/discovery 804.826s * swarm/network: run TestFileRetrieval with fewer nodes with -race Otherwise we get a failure due to extensive memory usage, as the CGO runtime cannot allocate more bytes. === RUN TestFileRetrieval ==7366==ERROR: ThreadSanitizer failed to allocate 0x80000 (524288) bytes of clock allocator (error code: 12) FATAL: ThreadSanitizer CHECK failed: ./gotsan.cc:6976 "((0 && "unable to mmap")) != (0)" (0x0, 0x0) FAIL github.com/ethereum/go-ethereum/swarm/network/stream 155.165s * swarm/network: run TestRetrieval with fewer nodes with -race Otherwise we get a failure due to extensive memory usage, as the CGO runtime cannot allocate more bytes ("ThreadSanitizer failed to allocate"). * swarm/network: skip flaky TestGetSubscriptionsRPC on Travis w/ -race Test fails a lot with something like: streamer_test.go:1332: Real subscriptions and expected amount don't match; real: 0, expected: 20 * swarm/storage: skip TestDB_SubscribePull* tests on Travis w/ -race Travis just hangs... ok github.com/ethereum/go-ethereum/swarm/storage/feed/lookup 1.307s keepalive keepalive keepalive or panics after a while. Without these tests the race detector job is now stable. Let's invetigate these tests in a separate issue: https://github.com/ethersphere/go-ethereum/issues/1245
2019-02-21 00:57:42 +03:00
if testutil.RaceEnabled {
// Travis cannot handle more nodes with -race; would time out.
return
}
testDeliveryFromNodes(t, 8, dataChunkCount, true)
testDeliveryFromNodes(t, 8, dataChunkCount, false)
testDeliveryFromNodes(t, 16, dataChunkCount, true)
testDeliveryFromNodes(t, 16, dataChunkCount, false)
2018-06-20 15:06:27 +03:00
}
func testDeliveryFromNodes(t *testing.T, nodes, chunkCount int, skipCheck bool) {
t.Helper()
t.Run(fmt.Sprintf("testDeliveryFromNodes_%d_%d_skipCheck_%t", nodes, chunkCount, skipCheck), func(t *testing.T) {
sim := simulation.New(map[string]simulation.ServiceFunc{
"streamer": func(ctx *adapters.ServiceContext, bucket *sync.Map) (s node.Service, cleanup func(), err error) {
addr, netStore, delivery, clean, err := newNetStoreAndDelivery(ctx, bucket)
if err != nil {
return nil, nil, err
}
r := NewRegistry(addr.ID(), delivery, netStore, state.NewInmemoryStore(), &RegistryOptions{
SkipCheck: skipCheck,
Syncing: SyncingDisabled,
}, nil)
bucket.Store(bucketKeyRegistry, r)
cleanup = func() {
r.Close()
clean()
}
return r, cleanup, nil
},
})
defer sim.Close()
log.Info("Adding nodes to simulation")
_, err := sim.AddNodesAndConnectChain(nodes)
if err != nil {
t.Fatal(err)
2018-06-20 15:06:27 +03:00
}
log.Info("Starting simulation")
ctx, cancel := context.WithCancel(context.Background())
defer cancel()
result := sim.Run(ctx, func(ctx context.Context, sim *simulation.Simulation) (err error) {
nodeIDs := sim.UpNodeIDs()
//determine the pivot node to be the first node of the simulation
pivot := nodeIDs[0]
//distribute chunks of a random file into Stores of nodes 1 to nodes
//we will do this by creating a file store with an underlying round-robin store:
//the file store will create a hash for the uploaded file, but every chunk will be
//distributed to different nodes via round-robin scheduling
log.Debug("Writing file to round-robin file store")
//to do this, we create an array for chunkstores (length minus one, the pivot node)
stores := make([]storage.ChunkStore, len(nodeIDs)-1)
//we then need to get all stores from the sim....
lStores := sim.NodesItems(bucketKeyStore)
i := 0
//...iterate the buckets...
for id, bucketVal := range lStores {
//...and remove the one which is the pivot node
if id == pivot {
continue
}
//the other ones are added to the array...
stores[i] = bucketVal.(storage.ChunkStore)
i++
}
//...which then gets passed to the round-robin file store
roundRobinFileStore := storage.NewFileStore(newRoundRobinStore(stores...), storage.NewFileStoreParams(), chunk.NewTags())
//now we can actually upload a (random) file to the round-robin store
size := chunkCount * chunkSize
log.Debug("Storing data to file store")
fileHash, wait, err := roundRobinFileStore.Store(ctx, testutil.RandomReader(1, size), int64(size), false)
// wait until all chunks stored
if err != nil {
return err
}
err = wait(ctx)
if err != nil {
return err
}
//get the pivot node's filestore
item, ok := sim.NodeItem(pivot, bucketKeyFileStore)
if !ok {
return fmt.Errorf("No filestore")
}
pivotFileStore := item.(*storage.FileStore)
log.Debug("Starting retrieval routine")
retErrC := make(chan error)
go func() {
// start the retrieval on the pivot node - this will spawn retrieve requests for missing chunks
// we must wait for the peer connections to have started before requesting
n, err := readAll(pivotFileStore, fileHash)
log.Info(fmt.Sprintf("retrieved %v", fileHash), "read", n, "err", err)
retErrC <- err
}()
disconnected := watchDisconnections(ctx, sim)
defer func() {
if err != nil && disconnected.bool() {
err = errors.New("disconnect events received")
}
}()
//finally check that the pivot node gets all chunks via the root hash
log.Debug("Check retrieval")
success := true
var total int64
total, err = readAll(pivotFileStore, fileHash)
if err != nil {
return err
}
log.Info(fmt.Sprintf("check if %08x is available locally: number of bytes read %v/%v (error: %v)", fileHash, total, size, err))
if err != nil || total != int64(size) {
success = false
}
2018-06-20 15:06:27 +03:00
if !success {
return fmt.Errorf("Test failed, chunks not available on all nodes")
}
if err := <-retErrC; err != nil {
return fmt.Errorf("requesting chunks: %v", err)
}
log.Debug("Test terminated successfully")
return nil
})
if result.Error != nil {
t.Fatal(result.Error)
}
})
2018-06-20 15:06:27 +03:00
}
func BenchmarkDeliveryFromNodesWithoutCheck(b *testing.B) {
for chunks := 32; chunks <= 128; chunks *= 2 {
for i := 2; i < 32; i *= 2 {
b.Run(
fmt.Sprintf("nodes=%v,chunks=%v", i, chunks),
func(b *testing.B) {
benchmarkDeliveryFromNodes(b, i, chunks, true)
2018-06-20 15:06:27 +03:00
},
)
}
}
}
func BenchmarkDeliveryFromNodesWithCheck(b *testing.B) {
for chunks := 32; chunks <= 128; chunks *= 2 {
for i := 2; i < 32; i *= 2 {
b.Run(
fmt.Sprintf("nodes=%v,chunks=%v", i, chunks),
func(b *testing.B) {
benchmarkDeliveryFromNodes(b, i, chunks, false)
2018-06-20 15:06:27 +03:00
},
)
}
}
}
func benchmarkDeliveryFromNodes(b *testing.B, nodes, chunkCount int, skipCheck bool) {
sim := simulation.New(map[string]simulation.ServiceFunc{
"streamer": func(ctx *adapters.ServiceContext, bucket *sync.Map) (s node.Service, cleanup func(), err error) {
addr, netStore, delivery, clean, err := newNetStoreAndDelivery(ctx, bucket)
2018-06-20 15:06:27 +03:00
if err != nil {
return nil, nil, err
2018-06-20 15:06:27 +03:00
}
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-25 01:59:00 +03:00
r := NewRegistry(addr.ID(), delivery, netStore, state.NewInmemoryStore(), &RegistryOptions{
SkipCheck: skipCheck,
Syncing: SyncingDisabled,
SyncUpdateDelay: 0,
}, nil)
bucket.Store(bucketKeyRegistry, r)
cleanup = func() {
r.Close()
clean()
}
2018-06-20 15:06:27 +03:00
return r, cleanup, nil
2018-06-20 15:06:27 +03:00
},
})
defer sim.Close()
2018-06-20 15:06:27 +03:00
log.Info("Initializing test config")
_, err := sim.AddNodesAndConnectChain(nodes)
2018-06-20 15:06:27 +03:00
if err != nil {
b.Fatal(err)
2018-06-20 15:06:27 +03:00
}
swarm: fix network/stream data races (#19051) * swarm/network/stream: newStreamerTester cleanup only if err is nil * swarm/network/stream: raise newStreamerTester waitForPeers timeout * swarm/network/stream: fix data races in GetPeerSubscriptions * swarm/storage: prevent data race on LDBStore.batchesC https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461775049 * swarm/network/stream: fix TestGetSubscriptionsRPC data race https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461768477 * swarm/network/stream: correctly use Simulation.Run callback https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461783804 * swarm/network: protect addrCountC in Kademlia.AddrCountC function https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462273444 * p2p/simulations: fix a deadlock calling getRandomNode with lock https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462317407 * swarm/network/stream: terminate disconnect goruotines in tests * swarm/network/stream: reduce memory consumption when testing data races * swarm/network/stream: add watchDisconnections helper function * swarm/network/stream: add concurrent counter for tests * swarm/network/stream: rename race/norace test files and use const * swarm/network/stream: remove watchSim and its panic * swarm/network/stream: pass context in watchDisconnections * swarm/network/stream: add concurrent safe bool for watchDisconnections * swarm/storage: fix LDBStore.batchesC data race by not closing it
2019-02-13 15:03:23 +03:00
ctx, cancel := context.WithCancel(context.Background())
defer cancel()
result := sim.Run(ctx, func(ctx context.Context, sim *simulation.Simulation) (err error) {
nodeIDs := sim.UpNodeIDs()
node := nodeIDs[len(nodeIDs)-1]
item, ok := sim.NodeItem(node, bucketKeyFileStore)
if !ok {
swarm: fix network/stream data races (#19051) * swarm/network/stream: newStreamerTester cleanup only if err is nil * swarm/network/stream: raise newStreamerTester waitForPeers timeout * swarm/network/stream: fix data races in GetPeerSubscriptions * swarm/storage: prevent data race on LDBStore.batchesC https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461775049 * swarm/network/stream: fix TestGetSubscriptionsRPC data race https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461768477 * swarm/network/stream: correctly use Simulation.Run callback https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461783804 * swarm/network: protect addrCountC in Kademlia.AddrCountC function https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462273444 * p2p/simulations: fix a deadlock calling getRandomNode with lock https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462317407 * swarm/network/stream: terminate disconnect goruotines in tests * swarm/network/stream: reduce memory consumption when testing data races * swarm/network/stream: add watchDisconnections helper function * swarm/network/stream: add concurrent counter for tests * swarm/network/stream: rename race/norace test files and use const * swarm/network/stream: remove watchSim and its panic * swarm/network/stream: pass context in watchDisconnections * swarm/network/stream: add concurrent safe bool for watchDisconnections * swarm/storage: fix LDBStore.batchesC data race by not closing it
2019-02-13 15:03:23 +03:00
return errors.New("No filestore")
2018-06-20 15:06:27 +03:00
}
remoteFileStore := item.(*storage.FileStore)
pivotNode := nodeIDs[0]
item, ok = sim.NodeItem(pivotNode, bucketKeyNetStore)
if !ok {
swarm: fix network/stream data races (#19051) * swarm/network/stream: newStreamerTester cleanup only if err is nil * swarm/network/stream: raise newStreamerTester waitForPeers timeout * swarm/network/stream: fix data races in GetPeerSubscriptions * swarm/storage: prevent data race on LDBStore.batchesC https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461775049 * swarm/network/stream: fix TestGetSubscriptionsRPC data race https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461768477 * swarm/network/stream: correctly use Simulation.Run callback https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461783804 * swarm/network: protect addrCountC in Kademlia.AddrCountC function https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462273444 * p2p/simulations: fix a deadlock calling getRandomNode with lock https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462317407 * swarm/network/stream: terminate disconnect goruotines in tests * swarm/network/stream: reduce memory consumption when testing data races * swarm/network/stream: add watchDisconnections helper function * swarm/network/stream: add concurrent counter for tests * swarm/network/stream: rename race/norace test files and use const * swarm/network/stream: remove watchSim and its panic * swarm/network/stream: pass context in watchDisconnections * swarm/network/stream: add concurrent safe bool for watchDisconnections * swarm/storage: fix LDBStore.batchesC data race by not closing it
2019-02-13 15:03:23 +03:00
return errors.New("No filestore")
2018-06-20 15:06:27 +03:00
}
netStore := item.(*storage.NetStore)
if _, err := sim.WaitTillHealthy(ctx); err != nil {
return err
2018-06-20 15:06:27 +03:00
}
swarm: fix network/stream data races (#19051) * swarm/network/stream: newStreamerTester cleanup only if err is nil * swarm/network/stream: raise newStreamerTester waitForPeers timeout * swarm/network/stream: fix data races in GetPeerSubscriptions * swarm/storage: prevent data race on LDBStore.batchesC https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461775049 * swarm/network/stream: fix TestGetSubscriptionsRPC data race https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461768477 * swarm/network/stream: correctly use Simulation.Run callback https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461783804 * swarm/network: protect addrCountC in Kademlia.AddrCountC function https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462273444 * p2p/simulations: fix a deadlock calling getRandomNode with lock https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462317407 * swarm/network/stream: terminate disconnect goruotines in tests * swarm/network/stream: reduce memory consumption when testing data races * swarm/network/stream: add watchDisconnections helper function * swarm/network/stream: add concurrent counter for tests * swarm/network/stream: rename race/norace test files and use const * swarm/network/stream: remove watchSim and its panic * swarm/network/stream: pass context in watchDisconnections * swarm/network/stream: add concurrent safe bool for watchDisconnections * swarm/storage: fix LDBStore.batchesC data race by not closing it
2019-02-13 15:03:23 +03:00
disconnected := watchDisconnections(ctx, sim)
defer func() {
swarm: fix network/stream data races (#19051) * swarm/network/stream: newStreamerTester cleanup only if err is nil * swarm/network/stream: raise newStreamerTester waitForPeers timeout * swarm/network/stream: fix data races in GetPeerSubscriptions * swarm/storage: prevent data race on LDBStore.batchesC https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461775049 * swarm/network/stream: fix TestGetSubscriptionsRPC data race https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461768477 * swarm/network/stream: correctly use Simulation.Run callback https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461783804 * swarm/network: protect addrCountC in Kademlia.AddrCountC function https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462273444 * p2p/simulations: fix a deadlock calling getRandomNode with lock https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462317407 * swarm/network/stream: terminate disconnect goruotines in tests * swarm/network/stream: reduce memory consumption when testing data races * swarm/network/stream: add watchDisconnections helper function * swarm/network/stream: add concurrent counter for tests * swarm/network/stream: rename race/norace test files and use const * swarm/network/stream: remove watchSim and its panic * swarm/network/stream: pass context in watchDisconnections * swarm/network/stream: add concurrent safe bool for watchDisconnections * swarm/storage: fix LDBStore.batchesC data race by not closing it
2019-02-13 15:03:23 +03:00
if err != nil && disconnected.bool() {
err = errors.New("disconnect events received")
}
}()
// benchmark loop
b.ResetTimer()
2018-06-20 15:06:27 +03:00
b.StopTimer()
Loop:
for i := 0; i < b.N; i++ {
// uploading chunkCount random chunks to the last node
hashes := make([]storage.Address, chunkCount)
for i := 0; i < chunkCount; i++ {
// create actual size real chunks
ctx := context.TODO()
hash, wait, err := remoteFileStore.Store(ctx, testutil.RandomReader(i, chunkSize), int64(chunkSize), false)
if err != nil {
swarm: fix network/stream data races (#19051) * swarm/network/stream: newStreamerTester cleanup only if err is nil * swarm/network/stream: raise newStreamerTester waitForPeers timeout * swarm/network/stream: fix data races in GetPeerSubscriptions * swarm/storage: prevent data race on LDBStore.batchesC https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461775049 * swarm/network/stream: fix TestGetSubscriptionsRPC data race https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461768477 * swarm/network/stream: correctly use Simulation.Run callback https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461783804 * swarm/network: protect addrCountC in Kademlia.AddrCountC function https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462273444 * p2p/simulations: fix a deadlock calling getRandomNode with lock https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462317407 * swarm/network/stream: terminate disconnect goruotines in tests * swarm/network/stream: reduce memory consumption when testing data races * swarm/network/stream: add watchDisconnections helper function * swarm/network/stream: add concurrent counter for tests * swarm/network/stream: rename race/norace test files and use const * swarm/network/stream: remove watchSim and its panic * swarm/network/stream: pass context in watchDisconnections * swarm/network/stream: add concurrent safe bool for watchDisconnections * swarm/storage: fix LDBStore.batchesC data race by not closing it
2019-02-13 15:03:23 +03:00
return fmt.Errorf("store: %v", err)
}
// wait until all chunks stored
err = wait(ctx)
if err != nil {
swarm: fix network/stream data races (#19051) * swarm/network/stream: newStreamerTester cleanup only if err is nil * swarm/network/stream: raise newStreamerTester waitForPeers timeout * swarm/network/stream: fix data races in GetPeerSubscriptions * swarm/storage: prevent data race on LDBStore.batchesC https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461775049 * swarm/network/stream: fix TestGetSubscriptionsRPC data race https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461768477 * swarm/network/stream: correctly use Simulation.Run callback https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461783804 * swarm/network: protect addrCountC in Kademlia.AddrCountC function https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462273444 * p2p/simulations: fix a deadlock calling getRandomNode with lock https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462317407 * swarm/network/stream: terminate disconnect goruotines in tests * swarm/network/stream: reduce memory consumption when testing data races * swarm/network/stream: add watchDisconnections helper function * swarm/network/stream: add concurrent counter for tests * swarm/network/stream: rename race/norace test files and use const * swarm/network/stream: remove watchSim and its panic * swarm/network/stream: pass context in watchDisconnections * swarm/network/stream: add concurrent safe bool for watchDisconnections * swarm/storage: fix LDBStore.batchesC data race by not closing it
2019-02-13 15:03:23 +03:00
return fmt.Errorf("wait store: %v", err)
}
// collect the hashes
hashes[i] = hash
}
// now benchmark the actual retrieval
// netstore.Get is called for each hash in a go routine and errors are collected
b.StartTimer()
errs := make(chan error)
for _, hash := range hashes {
go func(h storage.Address) {
_, err := netStore.Get(ctx, chunk.ModeGetRequest, h)
log.Warn("test check netstore get", "hash", h, "err", err)
errs <- err
}(hash)
}
// count and report retrieval errors
// if there are misses then chunk timeout is too low for the distance and volume (?)
var total, misses int
for err := range errs {
if err != nil {
log.Warn(err.Error())
misses++
}
total++
if total == chunkCount {
break
}
}
b.StopTimer()
2018-06-20 15:06:27 +03:00
if misses > 0 {
err = fmt.Errorf("%v chunk not found out of %v", misses, total)
2018-06-20 15:06:27 +03:00
break Loop
}
}
swarm: fix network/stream data races (#19051) * swarm/network/stream: newStreamerTester cleanup only if err is nil * swarm/network/stream: raise newStreamerTester waitForPeers timeout * swarm/network/stream: fix data races in GetPeerSubscriptions * swarm/storage: prevent data race on LDBStore.batchesC https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461775049 * swarm/network/stream: fix TestGetSubscriptionsRPC data race https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461768477 * swarm/network/stream: correctly use Simulation.Run callback https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-461783804 * swarm/network: protect addrCountC in Kademlia.AddrCountC function https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462273444 * p2p/simulations: fix a deadlock calling getRandomNode with lock https://github.com/ethersphere/go-ethereum/issues/1198#issuecomment-462317407 * swarm/network/stream: terminate disconnect goruotines in tests * swarm/network/stream: reduce memory consumption when testing data races * swarm/network/stream: add watchDisconnections helper function * swarm/network/stream: add concurrent counter for tests * swarm/network/stream: rename race/norace test files and use const * swarm/network/stream: remove watchSim and its panic * swarm/network/stream: pass context in watchDisconnections * swarm/network/stream: add concurrent safe bool for watchDisconnections * swarm/storage: fix LDBStore.batchesC data race by not closing it
2019-02-13 15:03:23 +03:00
return err
})
if result.Error != nil {
b.Fatal(result.Error)
2018-06-20 15:06:27 +03:00
}
}