p2p/discover: avoid dropping unverified nodes when table is almost empty (#21396)

This change improves discovery behavior in small networks. Very small
networks would often fail to bootstrap because all member nodes were
dropping table content due to findnode failure. The check is now changed
to avoid dropping nodes on findnode failure when their bucket is almost
empty. It also relaxes the liveness check requirement for FINDNODE/v4
response nodes, returning unverified nodes as results when there aren't
any verified nodes yet.

The "findnode failed" log now reports whether the node was dropped
instead of the number of results. The value of the "results" was
always zero by definition.

Co-authored-by: Felix Lange <fjl@twurst.com>

p2p/discover/lookup.go

@@ -104,9 +104,7 @@ func (it *lookup) startQueries() bool {
 
 	// The first query returns nodes from the local table.
 	if it.queries == -1 {
-		it.tab.mutex.Lock()
-		closest := it.tab.closest(it.result.target, bucketSize, false)
-		it.tab.mutex.Unlock()
+		closest := it.tab.findnodeByID(it.result.target, bucketSize, false)
 		// Avoid finishing the lookup too quickly if table is empty. It'd be better to wait
 		// for the table to fill in this case, but there is no good mechanism for that
 		// yet.
@@ -150,11 +148,14 @@ func (it *lookup) query(n *node, reply chan<- []*node) {
 	} else if len(r) == 0 {
 		fails++
 		it.tab.db.UpdateFindFails(n.ID(), n.IP(), fails)
-		it.tab.log.Trace("Findnode failed", "id", n.ID(), "failcount", fails, "results", len(r), "err", err)
-		if fails >= maxFindnodeFailures {
-			it.tab.log.Trace("Too many findnode failures, dropping", "id", n.ID(), "failcount", fails)
+		// Remove the node from the local table if it fails to return anything useful too
+		// many times, but only if there are enough other nodes in the bucket.
+		dropped := false
+		if fails >= maxFindnodeFailures && it.tab.bucketLen(n.ID()) >= bucketSize/2 {
+			dropped = true
 			it.tab.delete(n)
 		}
+		it.tab.log.Trace("FINDNODE failed", "id", n.ID(), "failcount", fails, "dropped", dropped, "err", err)
 	} else if fails > 0 {
 		// Reset failure counter because it counts _consecutive_ failures.
 		it.tab.db.UpdateFindFails(n.ID(), n.IP(), 0)

p2p/discover/table.go

@@ -392,22 +392,35 @@ func (tab *Table) copyLiveNodes() {
 	}
 }
 
-// closest returns the n nodes in the table that are closest to the
-// given id. The caller must hold tab.mutex.
-func (tab *Table) closest(target enode.ID, nresults int, checklive bool) *nodesByDistance {
-	// This is a very wasteful way to find the closest nodes but
-	// obviously correct. I believe that tree-based buckets would make
-	// this easier to implement efficiently.
-	close := &nodesByDistance{target: target}
+// findnodeByID returns the n nodes in the table that are closest to the given id.
+// This is used by the FINDNODE/v4 handler.
+//
+// The preferLive parameter says whether the caller wants liveness-checked results. If
+// preferLive is true and the table contains any verified nodes, the result will not
+// contain unverified nodes. However, if there are no verified nodes at all, the result
+// will contain unverified nodes.
+func (tab *Table) findnodeByID(target enode.ID, nresults int, preferLive bool) *nodesByDistance {
+	tab.mutex.Lock()
+	defer tab.mutex.Unlock()
+
+	// Scan all buckets. There might be a better way to do this, but there aren't that many
+	// buckets, so this solution should be fine. The worst-case complexity of this loop
+	// is O(tab.len() * nresults).
+	nodes := &nodesByDistance{target: target}
+	liveNodes := &nodesByDistance{target: target}
 	for _, b := range &tab.buckets {
 		for _, n := range b.entries {
-			if checklive && n.livenessChecks == 0 {
-				continue
+			nodes.push(n, nresults)
+			if preferLive && n.livenessChecks > 0 {
+				liveNodes.push(n, nresults)
 			}
-			close.push(n, nresults)
 		}
 	}
-	return close
+
+	if preferLive && len(liveNodes.entries) > 0 {
+		return liveNodes
+	}
+	return nodes
 }
 
 // len returns the number of nodes in the table.
@@ -421,6 +434,14 @@ func (tab *Table) len() (n int) {
 	return n
 }
 
+// bucketLen returns the number of nodes in the bucket for the given ID.
+func (tab *Table) bucketLen(id enode.ID) int {
+	tab.mutex.Lock()
+	defer tab.mutex.Unlock()
+
+	return len(tab.bucket(id).entries)
+}
+
 // bucket returns the bucket for the given node ID hash.
 func (tab *Table) bucket(id enode.ID) *bucket {
 	d := enode.LogDist(tab.self().ID(), id)

p2p/discover/table_test.go

@@ -190,7 +190,7 @@ func checkIPLimitInvariant(t *testing.T, tab *Table) {
 	}
 }
 
-func TestTable_closest(t *testing.T) {
+func TestTable_findnodeByID(t *testing.T) {
 	t.Parallel()
 
 	test := func(test *closeTest) bool {
@@ -202,7 +202,7 @@ func TestTable_closest(t *testing.T) {
 		fillTable(tab, test.All)
 
 		// check that closest(Target, N) returns nodes
-		result := tab.closest(test.Target, test.N, false).entries
+		result := tab.findnodeByID(test.Target, test.N, false).entries
 		if hasDuplicates(result) {
 			t.Errorf("result contains duplicates")
 			return false

p2p/discover/v4_udp.go

@@ -324,7 +324,16 @@ func (t *UDPv4) findnode(toid enode.ID, toaddr *net.UDPAddr, target v4wire.Pubke
 		Target:     target,
 		Expiration: uint64(time.Now().Add(expiration).Unix()),
 	})
-	return nodes, <-rm.errc
+	// Ensure that callers don't see a timeout if the node actually responded. Since
+	// findnode can receive more than one neighbors response, the reply matcher will be
+	// active until the remote node sends enough nodes. If the remote end doesn't have
+	// enough nodes the reply matcher will time out waiting for the second reply, but
+	// there's no need for an error in that case.
+	err := <-rm.errc
+	if err == errTimeout && rm.reply != nil {
+		err = nil
+	}
+	return nodes, err
 }
 
 // RequestENR sends enrRequest to the given node and waits for a response.
@@ -453,9 +462,9 @@ func (t *UDPv4) loop() {
 				if p.from == r.from && p.ptype == r.data.Kind() && p.ip.Equal(r.ip) {
 					ok, requestDone := p.callback(r.data)
 					matched = matched || ok
+					p.reply = r.data
 					// Remove the matcher if callback indicates that all replies have been received.
 					if requestDone {
-						p.reply = r.data
 						p.errc <- nil
 						plist.Remove(el)
 					}
@@ -715,9 +724,7 @@ func (t *UDPv4) handleFindnode(h *packetHandlerV4, from *net.UDPAddr, fromID eno
 
 	// Determine closest nodes.
 	target := enode.ID(crypto.Keccak256Hash(req.Target[:]))
-	t.tab.mutex.Lock()
-	closest := t.tab.closest(target, bucketSize, true).entries
-	t.tab.mutex.Unlock()
+	closest := t.tab.findnodeByID(target, bucketSize, true).entries
 
 	// Send neighbors in chunks with at most maxNeighbors per packet
 	// to stay below the packet size limit.

p2p/discover/v4_udp_test.go

@@ -22,6 +22,7 @@ import (
 	crand "crypto/rand"
 	"encoding/binary"
 	"errors"
+	"fmt"
 	"io"
 	"math/rand"
 	"net"
@@ -277,7 +278,7 @@ func TestUDPv4_findnode(t *testing.T) {
 	test.table.db.UpdateLastPongReceived(remoteID, test.remoteaddr.IP, time.Now())
 
 	// check that closest neighbors are returned.
-	expected := test.table.closest(testTarget.ID(), bucketSize, true)
+	expected := test.table.findnodeByID(testTarget.ID(), bucketSize, true)
 	test.packetIn(nil, &v4wire.Findnode{Target: testTarget, Expiration: futureExp})
 	waitNeighbors := func(want []*node) {
 		test.waitPacketOut(func(p *v4wire.Neighbors, to *net.UDPAddr, hash []byte) {
@@ -493,6 +494,91 @@ func TestUDPv4_EIP868(t *testing.T) {
 	})
 }
 
+// This test verifies that a small network of nodes can boot up into a healthy state.
+func TestUDPv4_smallNetConvergence(t *testing.T) {
+	t.Parallel()
+
+	// Start the network.
+	nodes := make([]*UDPv4, 4)
+	for i := range nodes {
+		var cfg Config
+		if i > 0 {
+			bn := nodes[0].Self()
+			cfg.Bootnodes = []*enode.Node{bn}
+		}
+		nodes[i] = startLocalhostV4(t, cfg)
+		defer nodes[i].Close()
+	}
+
+	// Run through the iterator on all nodes until
+	// they have all found each other.
+	status := make(chan error, len(nodes))
+	for i := range nodes {
+		node := nodes[i]
+		go func() {
+			found := make(map[enode.ID]bool, len(nodes))
+			it := node.RandomNodes()
+			for it.Next() {
+				found[it.Node().ID()] = true
+				if len(found) == len(nodes) {
+					status <- nil
+					return
+				}
+			}
+			status <- fmt.Errorf("node %s didn't find all nodes", node.Self().ID().TerminalString())
+		}()
+	}
+
+	// Wait for all status reports.
+	timeout := time.NewTimer(30 * time.Second)
+	defer timeout.Stop()
+	for received := 0; received < len(nodes); {
+		select {
+		case <-timeout.C:
+			for _, node := range nodes {
+				node.Close()
+			}
+		case err := <-status:
+			received++
+			if err != nil {
+				t.Error("ERROR:", err)
+				return
+			}
+		}
+	}
+}
+
+func startLocalhostV4(t *testing.T, cfg Config) *UDPv4 {
+	t.Helper()
+
+	cfg.PrivateKey = newkey()
+	db, _ := enode.OpenDB("")
+	ln := enode.NewLocalNode(db, cfg.PrivateKey)
+
+	// Prefix logs with node ID.
+	lprefix := fmt.Sprintf("(%s)", ln.ID().TerminalString())
+	lfmt := log.TerminalFormat(false)
+	cfg.Log = testlog.Logger(t, log.LvlTrace)
+	cfg.Log.SetHandler(log.FuncHandler(func(r *log.Record) error {
+		t.Logf("%s %s", lprefix, lfmt.Format(r))
+		return nil
+	}))
+
+	// Listen.
+	socket, err := net.ListenUDP("udp4", &net.UDPAddr{IP: net.IP{127, 0, 0, 1}})
+	if err != nil {
+		t.Fatal(err)
+	}
+	realaddr := socket.LocalAddr().(*net.UDPAddr)
+	ln.SetStaticIP(realaddr.IP)
+	ln.SetFallbackUDP(realaddr.Port)
+	udp, err := ListenV4(socket, ln, cfg)
+	if err != nil {
+		t.Fatal(err)
+	}
+	return udp
+}
+
 // dgramPipe is a fake UDP socket. It queues all sent datagrams.
 type dgramPipe struct {
 	mu      *sync.Mutex