This fixes a regression introduced recently. Without this fix, it's not
possible to use statetests without `.json` suffix. This is problematic for
goevmlab `minimizer`, which appends the suffix `.min` during processing.
This PR implements EIP-7702: "Set EOA account code".
Specification: https://eips.ethereum.org/EIPS/eip-7702
> Add a new transaction type that adds a list of `[chain_id, address,
nonce, y_parity, r, s]` authorization tuples. For each tuple, write a
delegation designator `(0xef0100 ++ address)` to the signing account’s
code. All code reading operations must load the code pointed to by the
designator.
---------
Co-authored-by: Mario Vega <marioevz@gmail.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR attempts to clean up some ambiguities and quirks from recent
changes to evm flag handling.
This PR mainly focuses on `evm run` subcommand, to use the same flags
for configuring tracing/output options as `statetest/blocktest` does.
Additionally, it adds quite a lot of tests for expected outputs of the
various subcommands, to avoid accidental changes.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR refactors the structlog a bit, making it so that it can be used
in a streaming mode.
-------------
OBS: this PR makes a change in the input `config` config, the third
input-parem field to `debug.traceCall`. Previously, seteting it to e.g.
` {"enableMemory": true, "limit": 1024}` would mean that the response
was limited to `1024` items. Since an 'item' may include both memory and
storage, the actual size of the response was undertermined.
After this change, the response will be limited to `1024` __`bytes`__
(or thereabouts).
-----------
The commandline usage of structlog now uses the streaming mode, leaving
the non-streaming mode of operation for the eth_Call.
There are two benefits of streaming mode
1. Not have to maintain a long list of operations,
2. Not have to duplicate / n-plicate data, e.g. memory / stack /
returndata so that each entry has their own private slice.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
* unify `staterunner` and `blockrunner` CLI flags, especially around
tracing
* added support for struct logger or json logging (although having issue
#30658)
* new --cross-check flag to validate the stateless witness collection
/ execution matches stateful
* adds support for tracing the stateless execution when a tracer is set
(to more easily debug differences)
* --human for more readable test summary
* directory or file input, so if you pass tests/spec-tests/fixtures/blockchain_tests it will execute all
blockchain tests
This change relocates the EVM tx context switching to the ApplyMessage function.
With this change, we can remove a lot of EVM.SetTxContext calls before
message execution.
### Tracing API changes
- This PR replaces the `GasPrice` field of the `VMContext` struct with
`BaseFee`. Users may instead take the effective gas price from
`tx.EffectiveGasTipValue(env.BaseFee)`.
---------
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
Reusing state between benchmark iterations resulted in inconsistent
results across runs, which surfaced in https://github.com/ethereum/go-ethereum/issues/30778 .
If these errors are triggered again, they will now trigger panic.
---------
Co-authored-by: Martin HS <martin@swende.se>
This pull request refactors the EVM constructor by removing the
TxContext parameter.
The EVM object is frequently overused. Ideally, only a single EVM
instance should be created and reused throughout the entire state
transition of a block, with the transaction context switched as needed
by calling evm.SetTxContext.
Unfortunately, in some parts of the code, the EVM object is repeatedly
created, resulting in unnecessary complexity. This pull request is the
first step towards gradually improving and simplifying this setup.
---------
Co-authored-by: Martin Holst Swende <martin@swende.se>
When `evm statetest --bench` is specified, benchmark the execution
similarly to `evm run`.
Also adds the ability to filter tests by name, index and fork.
---------
Co-authored-by: Martin Holst Swende <martin@swende.se>
Breaking changes:
- The ChainConfig was exposed to tracers via VMContext passed in
`OnTxStart`. This is unnecessary specially looking through the lens of
live tracers as chain config remains the same throughout the lifetime of
the program. It was there so that native API-invoked tracers could
access it. So instead we moved it to the constructor of API tracers.
Non-breaking:
- Change the default config of the tracers to be `{}` instead of nil.
This way an extra nil check can be avoided.
Refactoring:
- Rename `supply` struct to `supplyTracer`.
- Un-export some hook definitions.
Changelog: https://golangci-lint.run/product/changelog/#1610
Removes `exportloopref` (no longer needed), replaces it with
`copyloopvar` which is basically the opposite.
Also adds:
- `durationcheck`
- `gocheckcompilerdirectives`
- `reassign`
- `mirror`
- `tenv`
---------
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
This fixes a few issues missed in #29052:
* `requests` must be hex encoded, so added a helper to marshal.
* The statedb was committed too early and so the result of the system
calls was lost.
* For devnet-4 we need to pull off the type byte prefix from the request
data.
This is a redo of #29052 based on newer specs. Here we implement EIPs
scheduled for the Prague fork:
- EIP-7002: Execution layer triggerable withdrawals
- EIP-7251: Increase the MAX_EFFECTIVE_BALANCE
Co-authored-by: lightclient <lightclient@protonmail.com>
This implements recent changes to EIP-7685, EIP-6110, and
execution-apis.
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
Co-authored-by: Shude Li <islishude@gmail.com>
The bulk of this PR is authored by @lightclient , in the original
EOF-work. More recently, the code has been picked up and reworked for the new EOF
specification, by @MariusVanDerWijden , in https://github.com/ethereum/go-ethereum/pull/29518, and also @shemnon has contributed with fixes.
This PR is an attempt to start eating the elephant one small bite at a
time, by selecting only the eof-validation as a standalone piece which
can be merged without interfering too much in the core stuff.
In this PR:
- [x] Validation of eof containers, lifted from #29518, along with
test-vectors from consensus-tests and fuzzing, to ensure that the move
did not lose any functionality.
- [x] Definition of eof opcodes, which is a prerequisite for validation
- [x] Addition of `undefined` to a jumptable entry item. I'm not
super-happy with this, but for the moment it seems the least invasive
way to do it. A better way might be to go back and allowing nil-items or
nil execute-functions to denote "undefined".
- [x] benchmarks of eof validation speed
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Co-authored-by: Danno Ferrin <danno.ferrin@shemnon.com>
This pull request introduces a state.Reader interface for state
accessing.
The interface could be implemented in various ways. It can be pure trie
only reader, or the combination of trie and state snapshot. What's more,
this interface allows us to have more flexibility in the future, e.g.
the
archive reader (for accessing archive state).
Additionally, this pull request removes the following metrics
- `chain/snapshot/account/reads`
- `chain/snapshot/storage/reads`
Fixes#30254
It seems like the removed CreateAccount call is very old and not needed anymore.
After removing it, setting a sender that does not exist in the state doesn't seem to cause
an issue.
* all: add stateless verifications
* all: simplify witness and integrate it into live geth
---------
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
* all: refactor so NewBlock(..) and WithBody(..) take a types.Body
* core: fixup comments, remove txs != receipts panic
* core/types: add empty withdrawls to body if len == 0
Adds a flag `--trace.callframes` to t8n which will log info when entering or exiting a call frame in addition to the execution steps.
---------
Co-authored-by: Mario Vega <marioevz@gmail.com>
Here we add a Go API for running tracing plugins within the main block import process.
As an advanced user of geth, you can now create a Go file in eth/tracers/live/, and within
that file register your custom tracer implementation. Then recompile geth and select your tracer
on the command line. Hooks defined in the tracer will run whenever a block is processed.
The hook system is defined in package core/tracing. It uses a struct with callbacks, instead of
requiring an interface, for several reasons:
- We plan to keep this API stable long-term. The core/tracing hook API does not depend on
on deep geth internals.
- There are a lot of hooks, and tracers will only need some of them. Using a struct allows you
to implement only the hooks you want to actually use.
All existing tracers in eth/tracers/native have been rewritten to use the new hook system.
This change breaks compatibility with the vm.EVMLogger interface that we used to have.
If you are a user of vm.EVMLogger, please migrate to core/tracing, and sorry for breaking
your stuff. But we just couldn't have both the old and new tracing APIs coexist in the EVM.
---------
Co-authored-by: Matthieu Vachon <matthieu.o.vachon@gmail.com>
Co-authored-by: Delweng <delweng@gmail.com>
Co-authored-by: Martin HS <martin@swende.se>
This changes makes it so that when `evm statetest` executes, regardless of whether `--json` is specified or not, the stateroot is printed on `stderr` as a `jsonl` line. This enables speedier execution of testcases in goevmlab, in cases where full execution op-by-op is not required.
Package filepath implements utility routines for manipulating filename paths in a way compatible with the target operating system-defined file paths.
Package path implements utility routines for manipulating slash-separated paths.
The path package should only be used for paths separated by forward slashes, such as the paths in URLs
This change makes use of uin256 to represent balance in state. It touches primarily upon statedb, stateobject and state processing, trying to avoid changes in transaction pools, core types, rpc and tracers.
