This PR will allow a previously underpriced transaction back in after a timeout
of 5 minutes. This will block most transaction spam but allow for transactions to
be re-broadcasted on networks with less transaction flow.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR makes EIP-4788 work in the engine API and miner. It also fixes some bugs related to
EIP-4844 block processing and mining. Changes in detail:
- Header.BeaconRoot has been renamed to ParentBeaconRoot.
- The engine API now implements forkchoiceUpdatedV3
- newPayloadV3 method has been updated with the parentBeaconBlockRoot parameter
- beacon root is now applied to new blocks in miner
- For EIP-4844, block creation now updates the blobGasUsed field of the header
ReadSkeletonHeader can return nil if the header is missing, so we should
not access fields on it. Note that calling .Hash() on a nil header is fine, so there
is no need to actually check for nil.
Co-authored-by: Martin Holst Swende <martin@swende.se>
This changes the forkID calculation to ignore time-based forks that occurred before the
genesis block. It's supposed to be done this way because the spec says:
> If a chain is configured to start with a non-Frontier ruleset already in its genesis, that is NOT considered a fork.
This PR removes the newly added txpool.Transaction wrapper type, and instead adds a way
of keeping the blob sidecar within types.Transaction. It's better this way because most
code in go-ethereum does not care about blob transactions, and probably never will. This
will start mattering especially on the client side of RPC, where all APIs are based on
types.Transaction. Users need to be able to use the same signing flows they already
have.
However, since blobs are only allowed in some places but not others, we will now need to
add checks to avoid creating invalid blocks. I'm still trying to figure out the best place
to do some of these. The way I have it currently is as follows:
- In block validation (import), txs are verified not to have a blob sidecar.
- In miner, we strip off the sidecar when committing the transaction into the block.
- In TxPool validation, txs must have a sidecar to be added into the blobpool.
- Note there is a special case here: when transactions are re-added because of a chain
reorg, we cannot use the transactions gathered from the old chain blocks as-is,
because they will be missing their blobs. This was previously handled by storing the
blobs into the 'blobpool limbo'. The code has now changed to store the full
transaction in the limbo instead, but it might be confusing for code readers why we're
not simply adding the types.Transaction we already have.
Code changes summary:
- txpool.Transaction removed and all uses replaced by types.Transaction again
- blobpool now stores types.Transaction instead of defining its own blobTx format for storage
- the blobpool limbo now stores types.Transaction instead of storing only the blobs
- checks to validate the presence/absence of the blob sidecar added in certain critical places
The Go authors updated golang/x/ext to change the function signature of the slices sort method.
It's an entire shitshow now because x/ext is not tagged, so everyone's codebase just
picked a new version that some other dep depends on, causing our code to fail building.
This PR updates the dep on our code too and does all the refactorings to follow upstream...
This change removes a chainconfig parameter passed into rawdb.ReadLogs, which is not used nor needed.
It also modifies the filter loop slightly, avoiding a labeled break and instead using a method.
This change does not modify any behaviour.
* core/blobpool: implement txpool for blob txs
* core/txpool: track address reservations to notice any weird bugs
* core/txpool/blobpool: add support for in-memory operation for tests
* core/txpool/blobpool: fix heap updating after SetGasTip if account is evicted
* core/txpool/blobpool: fix eviction order if cheap leading txs are included
* core/txpool/blobpool: add note as to why the eviction fields are not inited in reinject
* go.mod: pull in inmem billy form upstream
* core/txpool/blobpool: fix review commens
* core/txpool/blobpool: make heap and heap test deterministic
* core/txpool/blobpool: luv u linter
* core/txpool: limit blob transactions to 16 per account
* core/txpool/blobpool: fix rebase errors
* core/txpool/blobpool: luv you linter
* go.mod: revert some strange crypto package dep updates
This is a spin-out from the EIP-4844 devnet branch, containing just the Engine API modifications
and nothing else. The newPayloadV3 endpoint won't really work in this version, but we need the
data structures for testing so I'd like to get this in early.
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
This change removes PoW header syncing related code from LES and also deletes
duplicated packages les/catalyst, les/downloader and les/fetcher. These package copies
were created because people wanted to make changes in their eth/ counterparts, but weren't
able to adapt LES code to the API changes.
The struct logger (or opcode tracer) was missing the return data field even
if this was explicitly enabled by user via `"enableReturnData": true` in the config.
This PR fixes this issue.
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
This change makes the StateDB track the state key value diff of a block transition.
We already tracked current account and storage values for the purpose of updating
the state snapshot. With this PR, we now also track the original (pre-transition) values
of accounts and storage slots.
This change adds back the 'geth --dev' mode of operation, using a cl-mocker.
---------
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
Co-authored-by: lightclient <14004106+lightclient@users.noreply.github.com>
The clean trie cache is persisted periodically, therefore Geth can
quickly warmup the cache in next restart.
However it will reduce the robustness of system. The assumption is
held in Geth that if the parent trie node is present, then the entire
sub-trie associated with the parent are all prensent.
Imagine the scenario that Geth rewinds itself to a past block and
restart, but Geth finds the root node of "future state" in clean
cache then regard this state is present in disk, while is not in fact.
Another example is offline pruning tool. Whenever an offline pruning
is performed, the clean cache file has to be removed to aviod hitting
the root node of "deleted states" in clean cache.
All in all, compare with the minor performance gain, system robustness
is something we care more.
The state availability is checked during the creation of a state reader.
- In hash-based database, if the specified root node does not exist on disk disk, then
the state reader won't be created and an error will be returned.
- In path-based database, if the specified state layer is not available, then the
state reader won't be created and an error will be returned.
This change also contains a stricter semantics regarding the `Commit` operation: once it has been performed, the trie is no longer usable, and certain operations will return an error.
This removes the feature where top nodes of the proof can be elided.
It was intended to be used by the LES server, to save bandwidth
when the client had already fetched parts of the state and only needed
some extra nodes to complete the proof. Alas, it never got implemented
in the client.
* all: move main transaction pool into a subpool
* go.mod: remove superfluous updates
* core/txpool: review fixes, handle txs rejected by all subpools
* core/txpool: typos
We had to do this workaround because it wasn't possible to export typed arrays from
JS to []byte. This was added in dop251/goja@2352993, so we can use the better way now.
* core/txpool: abstraction prep work for secondary pools (blob pool)
* core/txpool: leave subpool concepts to a followup pr
* les: fix tests using hard coded errors
* core/txpool: use bitmaps instead of maps for tx type filtering
Drop the notions of uncles, and disables activities while syncing
- Disable activities (e.g. generate pending state) while node is syncing,
- Disable empty block submission (but empty block is still kept for payload building),
- Drop uncle notion since (ethash is already deprecated)
eth: make StorageRangeAt take a block hash or number
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
This change implements async log retrievals via feeding logs in channels, instead of returning slices. This is a first step to implement #15063.
---------
Signed-off-by: jsvisa <delweng@gmail.com>
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Sina Mahmoodi <1591639+s1na@users.noreply.github.com>
ethclient accepts certain negative block number values as specifiers for the "pending",
"safe" and "finalized" block. In case of "pending", the value accepted by ethclient (-1)
did not match rpc.PendingBlockNumber (-2).
This wasn't really a problem, but other values accepted by ethclient did match the
definitions in package rpc, and it's weird to have this one special case where they don't.
To fix it, we decided to change the values of the constants rather than changing ethclient.
The constant values are not otherwise significant. This is a breaking API change, but we
believe not a dangerous one.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR modifies the interface for the results of `debug_traceBlock` and `debug_traceCall` by adding the `txHash`, allowing users to identify which transaction's trace result corresponds to.
---------
Co-authored-by: Martin Holst Swende <martin@swende.se>
Adds an optional config parameter to eth_call which allows users to override block context fields (same functionality that was added to traceCall in #24871)
---------
Co-authored-by: Martin Holst Swende <martin@swende.se>
* all: remove notion of trusted checkpoints in the post-merge world
* light: remove unused function
* eth/ethconfig, les: remove unused config option
* les: make linter happy
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
In this PR, all TryXXX(e.g. TryGet) APIs of trie are renamed to XXX(e.g. Get) with an error returned.
The original XXX(e.g. Get) APIs are renamed to MustXXX(e.g. MustGet) and does not return any error -- they print a log output. A future PR will change the behaviour to panic on errorrs.
The EIP150Hash was an idea where, after the fork, we hardcoded the forked hash as an extra defensive mechanism. It wasn't really used, since forks weren't contentious and for all the various testnets and private networks it's been a hassle to have around.
This change removes that config field.
---------
Signed-off-by: jsvisa <delweng@gmail.com>
Use the new atomic types in package eth/tracers
---------
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
This PR removes the Debug field from vmconfig, making it so that if a tracer is set, debug=true is implied.
---------
Co-authored-by: 0xTylerHolmes <tyler@ethereum.org>
Co-authored-by: Sina Mahmoodi <1591639+s1na@users.noreply.github.com>
This includes a semantic change to the `callTracer` as well as `flatCallTracer`.
The value of field `gas` in the **first** call frame will change as follows:
- It previously contained gas available after initial deductions (i.e. tx costs)
- It will now contain the full tx gasLimit value
Signed-off-by: jsvisa <delweng@gmail.com>
This PR fixes OOM panic in the callTracer as well as panicing on
opcode validation errors (e.g. stack underflow) in callTracer and
prestateTracer.
Co-authored-by: Martin Holst Swende <martin@swende.se>
This change renames StateTrie methods to remove the Try* prefix.
We added the Trie methods with prefix 'Try' a long time ago, working
around the problem that most existing methods of Trie did not return the
database error. This weird naming convention has persisted until now.
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Here, the core.Message interface turns into a plain struct and
types.Message gets removed.
This is a breaking change to packages core and core/types. While we do
not promise API stability for package core, we do for core/types. An
exception can be made for types.Message, since it doesn't have any
purpose apart from invoking the state transition in package core.
types.Message was also marked deprecated by the same commit it
got added in, 4dca5d4db7 (November 2016).
The core.Message interface was added in December 2014, in commit
db494170dc, for the purpose of 'testing' state transitions. It's the
same change that made transaction struct fields private. Before that,
the state transition used *types.Transaction directly.
Over time, multiple implementations of the interface accrued across
different packages, since constructing a Message is required whenever
one wants to invoke the state transition. These implementations all
looked very similar, a struct with private fields exposing the fields
as accessor methods.
By changing Message into a struct with public fields we can remove all
these useless interface implementations. It will also hopefully
simplify future changes to the type with less updates to apply across
all of go-ethereum when a field is added to Message.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
This ensures the "withdrawals" field will always be present in responses
to getPayloadBodiesByRangeV1 and getPayloadBodiesByHashV1.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
Fixes a race in TestNewPayloadOnInvalidTerminalBlock where setting the TTD raced with
the miner. Solution: set the TTD on the blockchain config not the genesis config.
Also fixes a race in CopyHeader which resulted in race reports all over the place.
Adds support for a native call tracer with the Parity format, which outputs call frames
in a flat array. This tracer accepts the following options:
- `convertParityErrors: true` will convert error messages to match those of Parity
- `includePrecompiles: true` will report all calls to precompiles. The default
matches Parity's behavior where CALL and STATICCALLs to precompiles are excluded
Incompatibilities with Parity include:
- Parity removes the result object in case of failure. This behavior is maintained
with the exception of reverts. Revert output usually contains useful information,
i.e. Solidity revert reason.
- The `gasUsed` field accounts for intrinsic gas (e.g. 21000 for simple transfers)
and refunds unlike Parity
- Block rewards are not reported
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
The EmptyRootHash and EmptyCodeHash are defined everywhere in the codebase, this PR replaces all of them with unified one defined in core/types package, and also defines constants for TxRoot, WithdrawalsRoot and UncleRoot
The method `GetPayloadBodiesByRangeV1` now returns "-38004: Too large request" error if the requested range is too large, according to spec
Co-authored-by: Martin Holst Swende <martin@swende.se>
This PR relaxes the block body ingress handling a bit: if block body withdrawals are missing (but expected to be empty), the body withdrawals are set to 'empty list' before being passed to upper layers.
This fixes an issue where a block passed from EthereumJS to geth was deemed invalid.
Logs stored on disk have minimal information. Contextual information such as block
number, index of log in block, index of transaction in block are filled in upon request.
We can fill in all these fields only having the block header and list of receipts.
But determining the transaction hash of a log requires the block body.
The goal of this PR is postponing this retrieval until we are sure we the transaction hash.
It happens often that the header bloom filter signals there might be matches in a block,
but after actually checking them reveals the logs do not match. We want to avoid fetching
the body in this case.
Note that this changes the semantics of Backend.GetLogs. Downstream callers of
GetLogs now assume log context fields have not been derived, and need to call
DeriveFields on the logs if necessary.
This is a breaking change in the tracing hooks API as well as semantics of the callTracer:
- CaptureEnter hook provided a nil value argument in case of DELEGATECALL. However to stay consistent with how delegate calls behave in EVM this hook is changed to pass in the value of the parent call.
- callTracer will return parent call's value for DELEGATECALL frames.
---------
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
* common, core, eth, les, trie: make prque generic
* les/vflux/server: fixed issues in priorityPool
* common, core, eth, les, trie: make priority also generic in prque
* les/flowcontrol: add test case for priority accumulator overflow
* les/flowcontrol: avoid priority value overflow
* common/prque: use int priority in some tests
No need to convert to int64 when we can just change the type used by the
queue.
* common/prque: remove comment about int64 range
---------
Co-authored-by: Zsolt Felfoldi <zsfelfoldi@gmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
This change ports some changes from the main PBSS PR:
- get rid of callback function in `trie.Database.Commit` which is not required anymore
- rework the `nodeResolver` in `trie.Iterator` to make it compatible with multiple state scheme
- some other shallow changes in tests and typo-fixes
According to the spec the payloadID needs to be random or dependent on all arguments, to prevent two payloads from clashing. This change adds withdrawals into the payload derivation.
---------
Co-authored-by: lightclient@protonmail.com <lightclient@protonmail.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR moves core/beacon to beacon/engine so that beacon-chain related code has its own top level package which also can house the the beacon lightclient-code.
This PR moves some trie-related db accessor methods to a different file, and also removes the schema type. Instead of the schema type, a string is used to distinguish between hashbased/pathbased db accessors.
This also moves some code from trie package to rawdb package.
This PR is intended to be a no-functionality-change prep PR for #25963 .
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This change implements withdrawals as specified in EIP-4895.
Co-authored-by: lightclient@protonmail.com <lightclient@protonmail.com>
Co-authored-by: marioevz <marioevz@gmail.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR changes the API so that uint64 is used for fork timestamps.
It's a good choice because types.Header also uses uint64 for time.
Co-authored-by: Felix Lange <fjl@twurst.com>
This change introduces a breaking change to miner.etherbase is configured.
Previously, users did not need to explicitly set the etherbase address via flag, since 'first' local account was used as etherbase automatically. This change removes the "default first account" feature.
In Proof-of-stake world, the fee recipient address is provided by CL, and not configured in Geth any more - meaning that miner.etherbase is mostly for legacy networks(pow, clique networks etc).
In legacy (pre-merge) sync mode, headers were contiguously downloaded from the network and when no more headers were available, we checked every few seconds whether there are 64 new blocks to move the pivot.
In beacon (post-merge) sync mode, we don't need to check for new skeleton headers non stop, since those re delivered one by one by the engine API. The missing code snippet from the header fetcher was to actually look at the latest head and move the pivot if it was more than 2*64-8 away. This PR adds the missing movement logic.
This makes non-JS tracers execute all block txs on a single goroutine.
In the previous implementation, we used to prepare every tx pre-state
on one goroutine, and then run the transactions again with tracing enabled.
Native tracers are usually faster, so it is faster overall to use their output as
the pre-state for tracing the next transaction.
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
This PR removes the notion of fakeStorage from the state objects, and instead, for any state modifications that are needed, it simply makes the changes.
This changes the StorageTrie method to return an error when the trie
is not available. It used to return an 'empty trie' in this case, but that's
not possible anymore under PBSS.
This PR builds on #26299, but also updates the tests to the most recent version, which includes tests regarding TheMerge.
This change adds checks to the beacon consensus engine, making it more strict in validating the pre- and post-headers, and not relying on the caller to have already correctly sanitized the headers/blocks.
This ensures that RPC method handlers will react to a timeout or
cancelled request soon after the event occurs.
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
Currently calling `debug_TraceTransaction` with a transaction hash that doesn't exist returns a confusing error: `genesis is not traceable`. This PR changes the behaviour to instead return an error message saying `transaction not found`
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
This PR makes it possible to modify the flush interval time via RPC. On one extreme, `0s`, it would act as an archive node. If set to `1h`, means that after one hour of effective block processing time, the trie would be flushed. If one block takes 200ms, this means that a flush would occur every `5*3600=18000` blocks -- however, if the memory size of the cached states grows too large, it will flush sooner.
Essentially, this makes it possible to configure the node to be more or less "archive:ish", and without restarting the node while reconfiguring it.
--syncTarget is a feature for development purpose in post-merge world. Previously
it's added into eth.Config. But it turns out that's a stupid idea.
- syncTarget is a block object, which is hard to be put in config file(large)
- syncTarget is just a dev feature, doesn't make too much sense to add it in config file
So I remove it from the eth config object. And it also fixes the #26328
This removes the 'time' field from logs, as well as from the tracer interface. This change makes the trace output deterministic. If a tracer needs the time they can measure it themselves. No need for evm to do this.
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
This PR introduces a node scheme abstraction. The interface is only implemented by `hashScheme` at the moment, but will be extended by `pathScheme` very soon.
Apart from that, a few changes are also included which is worth mentioning:
- port the changes in the stacktrie, tracking the path prefix of nodes during commit
- use ethdb.Database for constructing trie.Database. This is not necessary right now, but it is required for path-based used to open reverse diff freezer
It seems there is no fully typed library implementation of an LRU cache.
So I wrote one. Method names are the same as github.com/hashicorp/golang-lru,
and the new type can be used as a drop-in replacement.
Two reasons to do this:
- It's much easier to understand what a cache is for when the types are right there.
- Performance: the new implementation is slightly faster and performs zero memory
allocations in Add when the cache is at capacity. Overall, memory usage of the cache
is much reduced because keys are values are no longer wrapped in interface.
This PR changes the pending tx subscription to return RPCTransaction types instead of normal Transaction objects. This will fix the inconsistencies with other tx returning API methods (i.e. getTransactionByHash), and also fill in the sender value for the tx.
co-authored by @s1na
This PR now also includes a fix to the problem of mult-routines building blocks on the same input. This PR works as before with regards to stopping the work, but it just will not spin up a second routine if one is already building. So if the CL does N calls to FCU+buildblock, and N calls to GetPayload, only the first of each will do something, the other calls will be mostly no-ops.
This PR also adds printout of the payload id into the logs.
In some cases, it is desirable to capture what is triggered by each trace, when using the `callTracer`. For example: call `USDT.transfer` will trigger a `Transfer(from, to, value)` event.
This PR adds the option to capture logs to the call tracer, by specifying `{"withLog": true}` in the tracerconfig.
Any logs belonging to failed/reverted call-scopes are removed from the output, to prevent interpretation mistakes.
Signed-off-by: Delweng <delweng@gmail.com>
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
Inner call reverts will now return the reason similar to the top-level call. Separately, if top-level call is of type CREATE and it fails, its `to` field will now be cleared to `0x00...00` instead of being set to the created address.
This PR adds a parameter to startup, --synctarget. The synctarget flag is a developer-flag, that can be useful in some scenarios as a replacement for a CL node. It defines a fixed block sync target:
geth --syncmode=full --synctarget=./block_15816882.hex_rlp
The --synctarget is only made available during syncmode=full
* eth/tracers: fix gasUsed in call tracer
* fix js tracers gasUsed
* fix legacy prestate tracer
* fix restGas in test
* drop intrinsicGas field from js tracers
The prestate tracer did not report accounts that existed at a given address prior to a contract being created at that address.
Signed-off-by: Delweng <delweng@gmail.com>
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
In some cases, inner contract creation may not be successful, and an inner contract was not created. This PR fixes a crash that could occur when doing tracing in such situations.
