* ethclient/gethclient: improve time-sensitive flaky test
* eth/catalyst: fix (?) flaky test
* core: stop blockchains in tests after use
* core: fix dangling blockchain instances
* core: rm whitespace
* eth/gasprice, eth/tracers, consensus/clique: stop dangling blockchains in tests
* all: address review concerns
* core: goimports
* eth/catalyst: fix another time-sensitive test
* consensus/clique: add snapshot test run function
* core: rename stop() to stopWithoutSaving()
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR introduces a new mechanism in chain tracer for preventing creating too many trace states.
The workflow of chain tracer can be divided into several parts:
- state creator generates trace state in a thread
- state tracer retrieves the trace state and applies the tracing on top in another thread
- state collector gathers all result from state tracer and stream to users
It's basically a producer-consumer model here, while if we imagine that the state producer generates states too fast, then it will lead to accumulate lots of unused states in memory. Even worse, in path-based state scheme it will only keep the latest 128 states in memory, and the newly generated state will invalidate the oldest one by marking it as stale.
The solution for fixing it is to limit the speed of state generation. If there are over 128 states un-consumed in memory, then the creation will be paused until the states are be consumed properly.
Backwards compatibility warning: The result will from now on omit empty fields instead
of including a zero value (e.g. no more `balance: '0x'`).
The prestateTracer will now take an option `diffMode: bool`. In this mode
the tracer will output the pre state and post data for the modified parts of state.
Read-only accesses will be completely omitted. Creations (be it account or slot)
will be signified by omission in the `pre` list and inclusion in `post`. Whereas
deletion (be it account or slot) will be signified by inclusion in `pre` and omission
in `post` list.
Signed-off-by: Delweng <delweng@gmail.com>
The call tracer and prestate tracer store data JSON-encoded in memory. In order to support alternative encodings (specifically RLP), it's better to keep data a native format during tracing. This PR does marshalling at the end, using gencodec.
OBS!
This PR changes the call tracer result slightly:
- Order of type and value fields are changed (should not matter).
- Output fields are completely omitted when they're empty (no more output: "0x"). Previously, this was only _sometimes_ omitted (e.g. when call ended in a non-revert error) and otherwise 0x when the output was actually empty.
* eth/tracers: pad memory slice on oob case
* eth/tracers/js: fix testfailure due to err msg capitalization
Co-authored-by: Martin Holst Swende <martin@swende.se>
This changes the CI / release builds to use the latest Go version. It also
upgrades golangci-lint to a newer version compatible with Go 1.19.
In Go 1.19, godoc has gained official support for links and lists. The
syntax for code blocks in doc comments has changed and now requires a
leading tab character. gofmt adapts comments to the new syntax
automatically, so there are a lot of comment re-formatting changes in this
PR. We need to apply the new format in order to pass the CI lint stage with
Go 1.19.
With the linter upgrade, I have decided to disable 'gosec' - it produces
too many false-positive warnings. The 'deadcode' and 'varcheck' linters
have also been removed because golangci-lint warns about them being
unmaintained. 'unused' provides similar coverage and we already have it
enabled, so we don't lose much with this change.
This PR simplifies the logic of chain tracer and also adds the unit tests.
The most important change has been made in this PR is the state management. Whenever a tracing state is acquired there is a corresponding release function be returned as well. It must be called once the state is used up, otherwise resource leaking can happen.
And also the logic of state management has been simplified a lot. Specifically, the state provider(eth backend, les backend) should ensure the state is available and referenced. State customers can use the state according to their own needs, or build other states based on the given state. But once the release function is called, there is no guarantee of the availability of the state.
Co-authored-by: Sina Mahmoodi <1591639+s1na@users.noreply.github.com>
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
This PR allows users to pass in a config object directly to the tracers. Previously only the struct logger was configurable.
It also adds an option to the call tracer which if enabled makes it ignore any subcall and collect only information about the top-level call. See #25419 for discussion.
The tracers will silently ignore if they are passed a config they don't care about.
Adds a native tracer that returns that in case of failure returns the error message or the revert reason of a transaction.
Co-authored-by: Martin Holst Swende <martin@swende.se>
This changes the []byte <-> Uint8Array conversion to use an
ArrayBuffer, avoiding inefficient copying of the slice data in Goja.
Co-authored-by: Felix Lange <fjl@twurst.com>
This enables the following linters
- typecheck
- unused
- staticcheck
- bidichk
- durationcheck
- exportloopref
- gosec
WIth a few exceptions.
- We use a deprecated protobuf in trezor. I didn't want to mess with that, since I cannot meaningfully test any changes there.
- The deprecated TypeMux is used in a few places still, so the warning for it is silenced for now.
- Using string type in context.WithValue is apparently wrong, one should use a custom type, to prevent collisions between different places in the hierarchy of callers. That should be fixed at some point, but may require some attention.
- The warnings for using weak random generator are squashed, since we use a lot of random without need for cryptographic guarantees.
This PR adds support for block overrides when doing debug_traceCall.
- Previously, debug_traceCall against pending erroneously used a common.Hash{} stateroot when looking up the state, meaning that a totally empty state was used -- so it always failed,
- With this change, we reject executing debug_traceCall against pending.
- And we add ability to override all evm-visible header fields.
#23773 added a JS tracer which uses Goja as its engine. In this PR I remove the previous tracer which used duktape as well as remove the dependencies.
This PR also comes with 2 fixes in the Goja tracer and one small behavioural change:
I had handled errors in the native Go functions by panicing. My oversight was that Goja only handles panics with a Goja.Value as argument. The difference is panic(goja.Value) allows JS to catch the exception whereas Interrupt(error) doesn't.
There was a race in how I handled Stop.
Because of 1. some of the methods that simply return nil on error (like memory.slice) now throw an exception.
This adds a JS tracer runtime environment based on the Goja VM. The new
runtime replaces the duktape runtime, which will be removed soon.
Goja is implemented in Go and is faster for cases where the Go <-> JS
transition overhead dominates overall performance. It is faster because
duktape is written in C, and the transition cost includes the cost of using
cgo. Another reason for using Goja is that go-duktape is not maintained
anymore.
We expect the performace of JS tracing to be at least as good or better with
this change.
This change removes extraneous/unnecessary checks for equality
when comparing 2 accessList values A and B. Given that we validate that
their lengths of A and B are equal, if so and if every element in A is
in B, reflexively every element in B is already in A. If that weren't
the case and an element g existed in A but not in B, that would mean
that there is an extra element and hence a mathematical contradiction.
Fixes#24658
This adds a tools.go file to import all command packages used for
go:generate. Doing so makes it possible to execute go-based code
generators using 'go run', locking in the tool version using go.mod.
Co-authored-by: Felix Lange <fjl@twurst.com>
* eth/tracers: refactor traceTx to separate out struct logging
review fix
Update eth/tracers/api.go
Co-authored-by: Martin Holst Swende <martin@swende.se>
Mv ExecutionResult type to logger package
review fix
impl GetResult for StructLogger
make formatLogs private
confused exit and end..
account for intrinsicGas in structlogger, fix TraceCall test
Add Stop method to logger
Simplify traceTx
Fix test
rm logger from blockchain test
account for refund in structLogger
* use tx hooks in struct logger
* minor
* avoid executionResult in struct logger
* revert blockchain test changes
* core,eth: add empty tx logger hooks
* core,eth: add initial and remaining gas to tx hooks
* store tx gasLimit in js tracer
* use gasLimit to compute intrinsic cost for js tracer
* re-use rules in transitiondb
* rm logs
* rm logs
* Mv some fields from Start to TxStart
* simplify sender lookup in prestate tracer
* mv env to TxStart
* Revert "mv env to TxStart"
This reverts commit 656939634b9aff19f55a1cd167345faf8b1ec310.
* Revert "simplify sender lookup in prestate tracer"
This reverts commit ab65bce48007cab99e68232e7aac2fe008338d50.
* Revert "Mv some fields from Start to TxStart"
This reverts commit aa50d3d9b2559addc80df966111ef5fb5d0c1b6b.
* fix intrinsic gas for prestate tracer
* add comments
* refactor
* fix test case
* simplify consumedGas calc in prestate tracer
* eth/tracers: add initial native prestate tracer
* fix balance hex
* handle prestate for tx from and to
* drop created contract from prestate
* fix sender balance
* use switch instead
Co-authored-by: Martin Holst Swende <martin@swende.se>
* minor fix
* lookup create2 account
* mv code around a bit
* check stackLen for create2
* fix transfer tx for js prestate tracer
* fix create2 addr
* track extcodehash in js prestate tracer
Co-authored-by: Martin Holst Swende <martin@swende.se>
* core: implement eip-4399 random opcode
* core: make vmconfig threadsafe
* core: miner: pass vmConfig by value not reference
* all: enable 4399 by Rules
* core: remove diff (f)
* tests: set proper difficulty (f)
* smaller diff (f)
* eth/catalyst: nit
* core: make RANDOM a pointer which is only set post-merge
* cmd/evm/internal/t8ntool: fix t8n tracing of 4399
* tests: set difficulty
* cmd/evm/internal/t8ntool: check that baserules are london before applying the merge chainrules
* eth/tracers: Add support for REVERT in evmdis_tracer
* evm/tracers: Fix evmdis_tracer to use SELFDESTRUCT instead of SUICIDE
* eth/tracers: Regenerate tracer library
* core/vm: Move interpreter.ReadOnly check into the opcode implementations
Also remove the same check from the interpreter inner loop.
* core/vm: Remove obsolete operation.writes flag
* core/vm: Capture fault states in logger
Co-authored-by: Martin Holst Swende <martin@swende.se>
* core/vm: Remove panic added for testing
Co-authored-by: Martin Holst Swende <martin@swende.se>
* all: mv loggers to eth/tracers
* core/vm: minor
* eth/tracers: tmp comment out testStoreCapture
* eth/tracers: uncomment and fix logger test
* eth/tracers: simplify test
* core/vm: re-add license
* core/vm: minor
* rename LogConfig to Config
Some benchmarks in eth/filters were not good: they weren't reproducible, relying on geth chaindata to be present.
Another one was rejected because the receipt was lacking a backing transcation.
The p2p simulation benchmark had a lot of the warnings below, due to the framework calling both
Stop() and Close(). Apparently, the simulated adapter is the only implementation which has a Close(),
and there is no need to call both Stop and Close on it.
This PR fixes an issue in traceChain, where the statedb Commit operation was performed asynchronously with dereference-operations agains the underlying trie.Database instance. Due to how the reference counting works within the trie database (where parent count is recursively updated when new parents are added), doing dereferencing in the middle of Commit can cause the refcount to become wrong, leading to an inconsistent state.
This was fixed by doing Commit/Deref from the same routine.
This PR implements a new debug method, which I've talked briefly about to some other client developers. It allows the caller to obtain the intermediate state roots for a block (which might be either a canon block or a 'bad' block).
This change introduces 2 new optional methods; `enter()` and `exit()` for js tracers, and makes `step()` optiona. The two new methods are invoked when entering and exiting a call frame (but not invoked for the outermost scope, which has it's own methods). Currently these are the data fields passed to each of them:
enter: type (opcode), from, to, input, gas, value
exit: output, gasUsed, error
The PR also comes with a re-write of the callTracer. As a backup we keep the previous tracing script under the name `callTracerLegacy`. Behaviour of both tracers are equivalent for the most part, although there are some small differences (improvements), where the new tracer is more correct / has more information.
This adds a check to verify that a sender-account does not have code, which means that the codehash is either `emptyCodeHash` _OR_ not present. The latter occurs IFF the sender did not previously exist, a situation which can only occur with zero cost gasprices.
When processing a transaction with London fork rules, EIP-1559 mandates
checking that the sender must have sufficient balance to cover gas * gasFeeCap.
In the EIP's pseudocode, this check happens after the value transferred by the
transaction has already been deducted. However, in go-ethereum, the balance
has not yet been updated when the check happens, and therefore needs to be
added explicitly.
Co-authored-by: Martin Holst Swende <martin@swende.se>
* core,eth/tracers: make isPrecompiled dependent on HF
* eth/tracers: use keys when constructing chain config struct
* eth/tracers: dont initialize activePrecompiles with random value
* accounts/abi/bind: fix bounded contracts and sim backend for 1559
* accounts/abi/bind, ethclient: don't rely on chain config for gas prices
* all: enable London for all internal tests
* les: get receipt type info in les tests
* les: fix weird test
Co-authored-by: Martin Holst Swende <martin@swende.se>
* internal/ethapi: add baseFee to RPCMarshalHeader
* internal/ethapi: add FeeCap, Tip and correct GasPrice to EIP-1559 RPCTransaction results
* core,eth,les,internal: add support for tip estimation in gas price oracle
* internal/ethapi,eth/gasprice: don't suggest tip larger than fee cap
* core/types,internal: use correct eip1559 terminology for json marshalling
* eth, internal/ethapi: fix rebase problems
* internal/ethapi: fix rpc name of basefee
* internal/ethapi: address review concerns
* core, eth, internal, les: simplify gasprice oracle (#25)
* core, eth, internal, les: simplify gasprice oracle
* eth/gasprice: fix typo
* internal/ethapi: minor tweak in tx args
* internal/ethapi: calculate basefee for pending block
* internal/ethapi: fix panic
* internal/ethapi, eth/tracers: simplify txargs ToMessage
* internal/ethapi: remove unused param
* core, eth, internal: fix regressions wrt effective gas price in the evm
* eth/gasprice: drop weird debug println
* internal/jsre/deps: hack in 1559 gas conversions into embedded web3
* internal/jsre/deps: hack basFee to decimal conversion
* internal/ethapi: init feecap and tipcap for legacy txs too
* eth, graphql, internal, les: fix gas price suggestion on all combos
* internal/jsre/deps: handle decimal tipcap and feecap
* eth, internal: minor review fixes
* graphql, internal: export max fee cap RPC endpoint
* internal/ethapi: fix crash in transaction_args
* internal/ethapi: minor refactor to make the code safer
Co-authored-by: Ryan Schneider <ryanleeschneider@gmail.com>
Co-authored-by: lightclient@protonmail.com <lightclient@protonmail.com>
Co-authored-by: gary rong <garyrong0905@gmail.com>
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
There are two transaction parameter structures defined in
the codebase, although for different purposes. But most of
the parameters are shared. So it's nice to reduce the code
duplication by merging them together.
Co-authored-by: Martin Holst Swende <martin@swende.se>
This is the initial implementation of EIP-1559 in packages core/types and core.
Mining, RPC, etc. will be added in subsequent commits.
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Co-authored-by: lightclient@protonmail.com <lightclient@protonmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
Fixes the CaptureStart api to include the EVM, thus being able to set the statedb early on. This pr also exposes the struct we used internally in the interpreter to encapsulate the contract, mem, stack, rstack, so we pass it as a single struct to the tracer, and removes the error returns on the capture methods.
This adds support for EIP-2718 typed transactions as well as EIP-2930
access list transactions (tx type 1). These EIPs are scheduled for the
Berlin fork.
There very few changes to existing APIs in core/types, and several new APIs
to deal with access list transactions. In particular, there are two new
constructor functions for transactions: types.NewTx and types.SignNewTx.
Since the canonical encoding of typed transactions is not RLP-compatible,
Transaction now has new methods for encoding and decoding: MarshalBinary
and UnmarshalBinary.
The existing EIP-155 signer does not support the new transaction types.
All code dealing with transaction signatures should be updated to use the
newer EIP-2930 signer. To make this easier for future updates, we have
added new constructor functions for types.Signer: types.LatestSigner and
types.LatestSignerForChainID.
This change also adds support for the YoloV3 testnet.
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Felix Lange <fjl@twurst.com>
Co-authored-by: Ryan Schneider <ryanleeschneider@gmail.com>
* remove uneeded convertion type
* remove redundant type in composite literal
* omit explicit type where implicit
* remove unused redundant parenthesis
* remove redundant import alias duktape
Removes the yolov2 definition, adds yolov3, including EIP-2565. This PR also disables some of the erroneously generated blockchain and statetests, and adds the new genesis hash + alloc for yolov3.
This PR disables the CLI switches for yolo, since it's not complete until we merge support for 2930.
This moves the tracing RPC API implementation to package eth/tracers.
By doing so, package eth no longer depends on tracing and the duktape JS engine.
The change also enables tracing using the light client. All tracing methods work with the
light client, but it's a lot slower compared to using a full node.
* all: core: split vm.Config into BlockConfig and TxConfig
* core: core/vm: reset EVM between tx in block instead of creating new
* core/vm: added docs
* core/vm: use fixed uint256 library instead of big
* core/vm: remove intpools
* core/vm: upgrade uint256, fixes uint256.NewFromBig
* core/vm: use uint256.Int by value in Stack
* core/vm: upgrade uint256 to v1.0.0
* core/vm: don't preallocate space for 1024 stack items (only 16)
Co-authored-by: Martin Holst Swende <martin@swende.se>
* all: seperate consensus error and evm internal error
There are actually two types of error will be returned when
a tranaction/message call is executed: (a) consensus error
(b) evm internal error. The former should be converted to
a consensus issue, e.g. The sender doesn't enough asset to
purchase the gas it specifies. The latter is allowed since
evm itself is a blackbox and internal error is allowed to happen.
This PR emphasizes the difference by introducing a executionResult
structure. The evm error is embedded inside. So if any error
returned, it indicates consensus issue happens.
And also this PR improve the `EstimateGas` API to return the concrete
revert reason if the transaction always fails
* all: polish
* accounts/abi/bind/backends: add tests
* accounts/abi/bind/backends, internal: cleanup error message
* all: address comments
* core: fix lint
* accounts, core, eth, internal: address comments
* accounts, internal: resolve revert reason if possible
* accounts, internal: address comments
* core/evm, contracts: avoid copying memory for input in calls + make ecrecover not modify input buffer
* core/vm: optimize mstore a bit
* core/vm: change Get -> GetCopy in vm memory access
The precompile at 0x09 wraps the BLAKE2b F compression function:
https://tools.ietf.org/html/rfc7693#section-3.2
The precompile requires 6 inputs tightly encoded, taking exactly 213
bytes, as explained below.
- `rounds` - the number of rounds - 32-bit unsigned big-endian word
- `h` - the state vector - 8 unsigned 64-bit little-endian words
- `m` - the message block vector - 16 unsigned 64-bit little-endian words
- `t_0, t_1` - offset counters - 2 unsigned 64-bit little-endian words
- `f` - the final block indicator flag - 8-bit word
[4 bytes for rounds][64 bytes for h][128 bytes for m][8 bytes for t_0]
[8 bytes for t_1][1 byte for f]
The boolean `f` parameter is considered as `true` if set to `1`.
The boolean `f` parameter is considered as `false` if set to `0`.
All other values yield an invalid encoding of `f` error.
The precompile should compute the F function as specified in the RFC
(https://tools.ietf.org/html/rfc7693#section-3.2) and return the updated
state vector `h` with unchanged encoding (little-endian).
See EIP-152 for details.
* core/vm: remove function call for stack validation from evm runloop
* core/vm: separate gas calc into static + dynamic
* core/vm: optimize push1
* core/vm: reuse pooled bigints for ADDRESS, ORIGIN and CALLER
* core/vm: use generic error message for jump/jumpi, to avoid string interpolation
* testdata: fix tests for new error message
* core/vm: use 64-bit memory calculations
* core/vm: fix error in memory calculation
* core/vm: address review concerns
* core/vm: avoid unnecessary use of big.Int:BitLen()
This adds the global accumulated refund counter to the standard
json output as a numeric json value. Previously this was not very
interesting since it was not used much, but with the new sstore
gas changes the value is a lot more interesting from a consensus
investigation perspective.
Makes Interface interface a bit more stateless and abstract.
Obviously this change is dictated by EVMC design. The EVMC tries to keep the responsibility for EVM features totally inside the VMs, if feasible. This makes VM "stateless" because VM does not need to pass any information between executions, all information is included in parameters of the execute function.
* core/types, core/vm, eth, tests: regenerate gencodec files
* Makefile: update devtools target
Install protoc-gen-go and print reminders about npm, solc and protoc.
Also switch to github.com/kevinburke/go-bindata because it's more
maintained.
* contracts/ens: update contracts and regenerate with solidity v0.4.19
The newer upstream version of the FIFSRegistrar contract doesn't set the
resolver anymore. The resolver is now deployed separately.
* contracts/release: regenerate with solidity v0.4.19
* contracts/chequebook: fix fallback and regenerate with solidity v0.4.19
The contract didn't have a fallback function, payments would be rejected
when compiled with newer solidity. References to 'mortal' and 'owned'
use the local file system so we can compile without network access.
* p2p/discv5: regenerate with recent stringer
* cmd/faucet: regenerate
* dashboard: regenerate
* eth/tracers: regenerate
* internal/jsre/deps: regenerate
* dashboard: avoid sed -i because it's not portable
* accounts/usbwallet/internal/trezor: fix go generate warnings
