In few tests the returned error from `SendTransaction` is not being
checked. This PR checks the returned err in tests.
Returning errors also revealed tx in `TestCommitReturnValue` is not
actually being sent, and returns err ` only replay-protected (EIP-155)
transactions allowed over RPC`. Fixed the transaction by using the
`testTx` function.
`WriteToUDP` was never called, since `meteredUdpConn` exposed directly
all the methods from the underlying `UDPConn` interface.
This fixes the `discover/egress` metric never being updated.
This pull request adds a few more performance metrics, specifically:
- The average time cost of an account read
- The average time cost of a storage read
- The rate of account reads
- The rate of storage reads
Make tracers more robust by handling `nil` receipt as input.
Also pass in a receipt with gas used in the state test runner.
Closes https://github.com/ethereum/go-ethereum/issues/30117.
---------
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
This is a performance improvement on the account-creation rollback code
required for the archive node to support verkle. It uses the utility
function `DeleteAtStem` to remove code and account data per-group
instead of doing it leaf by leaf.
It also fixes an index bug, as code is chunked in 31-byte chunks, so
comparing with the code size should use 31 as its stride.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR adds the `dns:read` and `dns:edit` permissions to the required
set of permissions checked before deploying an ENR tree to Cloudflare.
These permissions are necessary for a successful publish.
**Background**:
The current logic for `devp2p dns to-cloudflare` checks for `zone:edit`
and `zone:read` permissions. However, when running the command with only
these two permissions, the following error occurs:
```
wrong permissions on zone REMOVED-ZONE: map[#zone:edit:false #zone:read:true]
```
Adding `zone:read` and `zone:edit` to the API token led to a different
error:
```
INFO [08-19|14:06:16.782] Retrieving existing TXT records on pos-nodes.hardfork.dev
Authentication error (10000)
```
This suggested that additional permissions were required. I added
`dns:read`, but encountered another error:
```
INFO [08-19|14:11:42.342] Retrieving existing TXT records on pos-nodes.hardfork.dev
INFO [08-19|14:11:42.851] Updating DNS entries
failed to publish REMOVED.pos-nodes.hardfork.dev: Authentication error (10000)
```
Finally, after adding both `dns:read` and `dns:edit` permissions, the
command executed successfully with the following output:
```
INFO [08-19|14:13:07.677] Checking Permissions on zone REMOVED-ZONE
INFO [08-19|14:13:08.014] Retrieving existing TXT records on pos-nodes.hardfork.dev
INFO [08-19|14:13:08.440] Updating DNS entries
INFO [08-19|14:13:08.440] "Updating pos-nodes.hardfork.dev from \"enrtree-root:v1 e=FSED3EDKEKRDDFMCLP746QY6CY l=FDXN3SN67NA5DKA4J2GOK7BVQI seq=1 sig=Glja2c9RviRqOpaaHR0MnHsQwU76nJXadJwFeiXpp8MRTVIhvL0LIireT0yE3ETZArGEmY5Ywz3FVHZ3LR5JTAE\" to \"enrtree-root:v1 e=AB66M4ULYD5OYN4XFFCPVZRLUM l=FDXN3SN67NA5DKA4J2GOK7BVQI seq=1 sig=H8cqDzu0FAzBplK4g3yudhSaNtszIebc2aj4oDm5a5ZE5PAg-xpCnQgVE_53CsgsqQpalD9byafx_FrUT61sagA\""
INFO [08-19|14:13:16.932] Updated DNS entries new=32 updated=1 untouched=100
INFO [08-19|14:13:16.932] Deleting stale DNS entries
INFO [08-19|14:13:24.663] Deleted stale DNS entries count=31
```
With this PR, the required permissions for deploying an ENR tree to
Cloudflare now include `zone:read`, `zone:edit`, `dns:read`, and
`dns:edit`. The initial check now includes all of the necessary
permissions and indicates in the error message which permissions are
missing:
```
INFO [08-19|14:17:20.339] Checking Permissions on zone REMOVED-ZONE
wrong permissions on zone REMOVED-ZONE: map[#dns_records:edit:false #dns_records:read:false #zone:edit:false #zone:read:true]
```
This PR updates the version of go used in builds and docker to
1.23.0. Release notes: https://go.dev/doc/go1.23
More importantly, following our policy of maintaining the last two
versions (which now becomes 1.23 and 1.22), we can now make use of
the things that were introduced in 1.22: https://go.dev/doc/go1.22
Go 1.22 makes two changes to “for” loops.
- each iteration creates new variables,
- for loops may range over integers
Other than that, some interesting library changes and other stuff.
This PR implements the conclusions from
https://github.com/ethereum/go-ethereum/issues/28987#issuecomment-2296075028,
that is:
Building with `--strip-all` as a ld-flag to the cgo linker, to remove
symbols. Without that, some spurious reference to a temporary file is
included into the kzg-related library.
Building with `--build-id=none`, to avoid putting a `build id` into the file.
closes#29475, replaces #29657, #30104
Fixes two issues. First is a deadlock where the txpool attempts to reorg, but can't complete because there are no readers left for the new txs subscription. Second, resolves a problem with on demand mode where txs may be left pending when there are more pending txs than block space.
Co-authored-by: Martin Holst Swende <martin@swende.se>
Our `WriteArchive`, used by ci builder, creates files in the repo root,in order to upload. After we've built the amd64-builds, we create the uploads, and cause the repo to be flagged as dirty for the remaining builds.
This change fixes it by adding the artefacts to gitignore. Closes#30324
When we are building in detached head, we cannot easily obtain the same information as we can if we're in non-detached head.
However, one thing we _can_ obtain is the git-hash and git-date. Currently, we omit to include the git-date into the build-info, which causes problem for reproducable builds which are on a detached head.
This change fixes it to include the date-info always.
To allow all error paths in `vm.EVM.create()` to consume the necessary
gas, there is currently a pattern of gating code on `if err == nil`
instead of returning as soon as the error occurs. The same behaviour can
be achieved by abstracting the gated code into a method that returns
immediately on error, improving readability and thus making it easier to
understand and maintain.
Here I am adding a discv5 nodes source into the p2p dial iterator. It's
an improved version of #29533.
Unlike discv4, the discv5 random nodes iterator will always provide full
ENRs. This means we can apply filtering to the results and will only try
dialing nodes which explictly opt into the eth protocol with a matching
chain.
I have also removed the dial iterator from snap. We don't have an
official DNS list for snap anymore, and I doubt anyone else is running
one. While we could potentially filter for snap on discv5, there will be
very few nodes announcing it, and the extra iterator would just stall
the dialer.
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
Add coinbase address to javascript tracer context.
This PR adds the `coinbase` address to `jsTracer.ctx`, allowing access
to the coinbase address (fee receipient) in custom JavaScript tracers.
Example usage:
```javascript
result: function(ctx) {
return toAddress(ctx.coinbase);
}
```
This change enables custom tracers to access coinbase address,
previously unavailable, enhancing their capabilities to match built-in
tracers.
This pull request drops the legacy transaction retrieval support from before
eth68, adding the restrictions that transaction metadata must be provided
along with the transaction announment.
This PR refactors the genesis initialization a bit, s.th. we only
compute the blockhash once instead of twice as before (during hashAlloc
and flushAlloc)
This will significantly reduce the amount of memory allocated during
genesis init
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This pull request fixes#30229.
During snap sync, large storage will be split into several pieces and
synchronized concurrently. Unfortunately, the tradeoff is that the respective
merkle trie of each storage chunk will be incomplete due to the incomplete
boundaries. The trie nodes on these boundaries will be discarded, and any
dangling nodes on disk will also be removed if they fall on these paths,
ensuring the state healer won't be blocked.
However, the dangling account trie nodes on the path from the root to the
associated account are left untouched. This means the dangling account trie
nodes could potentially stop the state healing and break the assumption that the
entire subtrie should exist if the subtrie root exists. We should consider the
account trie node as the ancestor of the corresponding storage trie node.
In the scenarios described in the above ticket, the state corruption could occur
if there is a dangling account trie node while some storage trie nodes are
removed due to synchronization redo.
The fixing idea is pretty straightforward, the trie nodes on the path from root
to account should all be explicitly removed if an incomplete storage trie
occurs. Therefore, a `delete` operation has been added into `gentrie` to
explicitly clear the account along with all nodes on this path. The special
thing is that it's a cross-trie clearing. In theory, there may be a dangling
node at any position on this account key and we have to clear all of them.
Co-authored-by: Felix Lange <fjl@twurst.com>
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Co-authored-by: lightclient <lightclient@protonmail.com>
