go-ethereum/swarm/network/networkid_test.go
Felix Lange 30cd5c1854
all: new p2p node representation (#17643)
Package p2p/enode provides a generalized representation of p2p nodes
which can contain arbitrary information in key/value pairs. It is also
the new home for the node database. The "v4" identity scheme is also
moved here from p2p/enr to remove the dependency on Ethereum crypto from
that package.

Record signature handling is changed significantly. The identity scheme
registry is removed and acceptable schemes must be passed to any method
that needs identity. This means records must now be validated explicitly
after decoding.

The enode API is designed to make signature handling easy and safe: most
APIs around the codebase work with enode.Node, which is a wrapper around
a valid record. Going from enr.Record to enode.Node requires a valid
signature.

* p2p/discover: port to p2p/enode

This ports the discovery code to the new node representation in
p2p/enode. The wire protocol is unchanged, this can be considered a
refactoring change. The Kademlia table can now deal with nodes using an
arbitrary identity scheme. This requires a few incompatible API changes:

  - Table.Lookup is not available anymore. It used to take a public key
    as argument because v4 protocol requires one. Its replacement is
    LookupRandom.
  - Table.Resolve takes *enode.Node instead of NodeID. This is also for
    v4 protocol compatibility because nodes cannot be looked up by ID
    alone.
  - Types Node and NodeID are gone. Further commits in the series will be
    fixes all over the the codebase to deal with those removals.

* p2p: port to p2p/enode and discovery changes

This adapts package p2p to the changes in p2p/discover. All uses of
discover.Node and discover.NodeID are replaced by their equivalents from
p2p/enode.

New API is added to retrieve the enode.Node instance of a peer. The
behavior of Server.Self with discovery disabled is improved. It now
tries much harder to report a working IP address, falling back to
127.0.0.1 if no suitable address can be determined through other means.
These changes were needed for tests of other packages later in the
series.

* p2p/simulations, p2p/testing: port to p2p/enode

No surprises here, mostly replacements of discover.Node, discover.NodeID
with their new equivalents. The 'interesting' API changes are:

 - testing.ProtocolSession tracks complete nodes, not just their IDs.
 - adapters.NodeConfig has a new method to create a complete node.

These changes were needed to make swarm tests work.

Note that the NodeID change makes the code incompatible with old
simulation snapshots.

* whisper/whisperv5, whisper/whisperv6: port to p2p/enode

This port was easy because whisper uses []byte for node IDs and
URL strings in the API.

* eth: port to p2p/enode

Again, easy to port because eth uses strings for node IDs and doesn't
care about node information in any way.

* les: port to p2p/enode

Apart from replacing discover.NodeID with enode.ID, most changes are in
the server pool code. It now deals with complete nodes instead
of (Pubkey, IP, Port) triples. The database format is unchanged for now,
but we should probably change it to use the node database later.

* node: port to p2p/enode

This change simply replaces discover.Node and discover.NodeID with their
new equivalents.

* swarm/network: port to p2p/enode

Swarm has its own node address representation, BzzAddr, containing both
an overlay address (the hash of a secp256k1 public key) and an underlay
address (enode:// URL).

There are no changes to the BzzAddr format in this commit, but certain
operations such as creating a BzzAddr from a node ID are now impossible
because node IDs aren't public keys anymore.

Most swarm-related changes in the series remove uses of
NewAddrFromNodeID, replacing it with NewAddr which takes a complete node
as argument. ToOverlayAddr is removed because we can just use the node
ID directly.
2018-09-25 00:59:00 +02:00

266 lines
7.9 KiB
Go

// Copyright 2018 The go-ethereum Authors
// This file is part of the go-ethereum library.
//
// The go-ethereum library is free software: you can redistribute it and/or modify
// it under the terms of the GNU Lesser General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// The go-ethereum library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU Lesser General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public License
// along with the go-ethereum library. If not, see <http://www.gnu.org/licenses/>.
package network
import (
"bytes"
"context"
"flag"
"fmt"
"math/rand"
"strings"
"testing"
"time"
"github.com/ethereum/go-ethereum/log"
"github.com/ethereum/go-ethereum/node"
"github.com/ethereum/go-ethereum/p2p"
"github.com/ethereum/go-ethereum/p2p/enode"
"github.com/ethereum/go-ethereum/p2p/simulations"
"github.com/ethereum/go-ethereum/p2p/simulations/adapters"
"github.com/ethereum/go-ethereum/rpc"
)
var (
currentNetworkID int
cnt int
nodeMap map[int][]enode.ID
kademlias map[enode.ID]*Kademlia
)
const (
NumberOfNets = 4
MaxTimeout = 6
)
func init() {
flag.Parse()
rand.Seed(time.Now().Unix())
}
/*
Run the network ID test.
The test creates one simulations.Network instance,
a number of nodes, then connects nodes with each other in this network.
Each node gets a network ID assigned according to the number of networks.
Having more network IDs is just arbitrary in order to exclude
false positives.
Nodes should only connect with other nodes with the same network ID.
After the setup phase, the test checks on each node if it has the
expected node connections (excluding those not sharing the network ID).
*/
func TestNetworkID(t *testing.T) {
log.Debug("Start test")
//arbitrarily set the number of nodes. It could be any number
numNodes := 24
//the nodeMap maps all nodes (slice value) with the same network ID (key)
nodeMap = make(map[int][]enode.ID)
//set up the network and connect nodes
net, err := setupNetwork(numNodes)
if err != nil {
t.Fatalf("Error setting up network: %v", err)
}
defer func() {
//shutdown the snapshot network
log.Trace("Shutting down network")
net.Shutdown()
}()
//let's sleep to ensure all nodes are connected
time.Sleep(1 * time.Second)
//for each group sharing the same network ID...
for _, netIDGroup := range nodeMap {
log.Trace("netIDGroup size", "size", len(netIDGroup))
//...check that their size of the kademlia is of the expected size
//the assumption is that it should be the size of the group minus 1 (the node itself)
for _, node := range netIDGroup {
if kademlias[node].addrs.Size() != len(netIDGroup)-1 {
t.Fatalf("Kademlia size has not expected peer size. Kademlia size: %d, expected size: %d", kademlias[node].addrs.Size(), len(netIDGroup)-1)
}
kademlias[node].EachAddr(nil, 0, func(addr *BzzAddr, _ int, _ bool) bool {
found := false
for _, nd := range netIDGroup {
p := nd.Bytes()
if bytes.Equal(p, addr.Address()) {
found = true
}
}
if !found {
t.Fatalf("Expected node not found for node %s", node.String())
}
return true
})
}
}
log.Info("Test terminated successfully")
}
// setup simulated network with bzz/discovery and pss services.
// connects nodes in a circle
// if allowRaw is set, omission of builtin pss encryption is enabled (see PssParams)
func setupNetwork(numnodes int) (net *simulations.Network, err error) {
log.Debug("Setting up network")
quitC := make(chan struct{})
errc := make(chan error)
nodes := make([]*simulations.Node, numnodes)
if numnodes < 16 {
return nil, fmt.Errorf("Minimum sixteen nodes in network")
}
adapter := adapters.NewSimAdapter(newServices())
//create the network
net = simulations.NewNetwork(adapter, &simulations.NetworkConfig{
ID: "NetworkIdTestNet",
DefaultService: "bzz",
})
log.Debug("Creating networks and nodes")
var connCount int
//create nodes and connect them to each other
for i := 0; i < numnodes; i++ {
log.Trace("iteration: ", "i", i)
nodeconf := adapters.RandomNodeConfig()
nodes[i], err = net.NewNodeWithConfig(nodeconf)
if err != nil {
return nil, fmt.Errorf("error creating node %d: %v", i, err)
}
err = net.Start(nodes[i].ID())
if err != nil {
return nil, fmt.Errorf("error starting node %d: %v", i, err)
}
client, err := nodes[i].Client()
if err != nil {
return nil, fmt.Errorf("create node %d rpc client fail: %v", i, err)
}
//now setup and start event watching in order to know when we can upload
ctx, watchCancel := context.WithTimeout(context.Background(), MaxTimeout*time.Second)
defer watchCancel()
watchSubscriptionEvents(ctx, nodes[i].ID(), client, errc, quitC)
//on every iteration we connect to all previous ones
for k := i - 1; k >= 0; k-- {
connCount++
log.Debug(fmt.Sprintf("Connecting node %d with node %d; connection count is %d", i, k, connCount))
err = net.Connect(nodes[i].ID(), nodes[k].ID())
if err != nil {
if !strings.Contains(err.Error(), "already connected") {
return nil, fmt.Errorf("error connecting nodes: %v", err)
}
}
}
}
//now wait until the number of expected subscriptions has been finished
//`watchSubscriptionEvents` will write with a `nil` value to errc
for err := range errc {
if err != nil {
return nil, err
}
//`nil` received, decrement count
connCount--
log.Trace("count down", "cnt", connCount)
//all subscriptions received
if connCount == 0 {
close(quitC)
break
}
}
log.Debug("Network setup phase terminated")
return net, nil
}
func newServices() adapters.Services {
kademlias = make(map[enode.ID]*Kademlia)
kademlia := func(id enode.ID) *Kademlia {
if k, ok := kademlias[id]; ok {
return k
}
params := NewKadParams()
params.MinProxBinSize = 2
params.MaxBinSize = 3
params.MinBinSize = 1
params.MaxRetries = 1000
params.RetryExponent = 2
params.RetryInterval = 1000000
kademlias[id] = NewKademlia(id[:], params)
return kademlias[id]
}
return adapters.Services{
"bzz": func(ctx *adapters.ServiceContext) (node.Service, error) {
addr := NewAddr(ctx.Config.Node())
hp := NewHiveParams()
hp.Discovery = false
cnt++
//assign the network ID
currentNetworkID = cnt % NumberOfNets
if ok := nodeMap[currentNetworkID]; ok == nil {
nodeMap[currentNetworkID] = make([]enode.ID, 0)
}
//add this node to the group sharing the same network ID
nodeMap[currentNetworkID] = append(nodeMap[currentNetworkID], ctx.Config.ID)
log.Debug("current network ID:", "id", currentNetworkID)
config := &BzzConfig{
OverlayAddr: addr.Over(),
UnderlayAddr: addr.Under(),
HiveParams: hp,
NetworkID: uint64(currentNetworkID),
}
return NewBzz(config, kademlia(ctx.Config.ID), nil, nil, nil), nil
},
}
}
func watchSubscriptionEvents(ctx context.Context, id enode.ID, client *rpc.Client, errc chan error, quitC chan struct{}) {
events := make(chan *p2p.PeerEvent)
sub, err := client.Subscribe(context.Background(), "admin", events, "peerEvents")
if err != nil {
log.Error(err.Error())
errc <- fmt.Errorf("error getting peer events for node %v: %s", id, err)
return
}
go func() {
defer func() {
sub.Unsubscribe()
log.Trace("watch subscription events: unsubscribe", "id", id)
}()
for {
select {
case <-quitC:
return
case <-ctx.Done():
select {
case errc <- ctx.Err():
case <-quitC:
}
return
case e := <-events:
if e.Type == p2p.PeerEventTypeAdd {
errc <- nil
}
case err := <-sub.Err():
if err != nil {
select {
case errc <- fmt.Errorf("error getting peer events for node %v: %v", id, err):
case <-quitC:
}
return
}
}
}
}()
}