tokenbridge/oracle

POA TokenBridge / Oracle

Oracle responsible for listening to bridge related events and authorizing asset transfers.

Overview

Please refer to the POA TokenBridge overview first of all.

The Oracle is deployed on specified validator nodes (only nodes whose private keys correspond to addresses specified in the smart contracts) in the network. It connects to two chains via a Remote Procedure Call (RPC) and is responsible for:

• listening to events related to bridge contracts
• sending transactions to authorize asset transfers

Architecture

Native-to-ERC20 and Arbitrary-Message

ERC20-to-ERC20 and ERC20-to-Native

Watcher

A watcher listens for a certain event and creates proper jobs in the queue. These jobs contain the transaction data (without the nonce) and the transaction hash for the related event. The watcher runs on a given frequency, keeping track of the last processed block.

If the watcher observes that the transaction data cannot be prepared, which generally means that the corresponding method of the bridge contract cannot be invoked, it inspects the contract state to identify the potential reason for failure and records this in the logs.

There are three Watchers:

• Signature Request Watcher: Listens to UserRequestForSignature events on the Home network.
• Collected Signatures Watcher: Listens to CollectedSignatures events on the Home network.
• Affirmation Request Watcher: Depends on the bridge mode.
  • Native-to-ERC20 and Arbitrary-Message: Listens to UserRequestForAffirmation raised by the bridge contract.
  • ERC20-to-ERC20 and ERC20-to-Native: Listens to Transfer events raised by the token contract.

Sender

A sender subscribes to the queue and keeps track of the nonce. It takes jobs from the queue, extracts transaction data, adds the proper nonce, and sends it to the network.

There are two Senders:

• Home Sender: Sends a transaction to the Home network.
• Foreign Sender: Sends a transaction to the Foreign network.

RabbitMQ

RabbitMQ is used to transmit jobs from watchers to senders.

Redis DB

Redis is used to store the number of blocks that were already inspected by watchers, and the NOnce (Number of Operation) which was used previously by the sender to send a transaction.

For more information on the Redis/RabbitMQ requirements, see #90. We also provide useful commands for development.

How to Use

Deploy the Bridge Contracts

Note: The following steps detail the bridge deployment process for development and testing. For deployment in a production environment we recommend using the Bridge Deployment Playbooks.

1. Deploy the bridge contracts

2. Open bridgeDeploymentResults.json or copy the JSON output generated by the bridge contract deployment process.

Output examples

Native-to-ERC20 mode example:

{
    "homeBridge": {
        "address": "0xc60daff55ec5b5ce5c3d2105a77e287ff638c35e",
        "deployedBlockNumber": 123321
    },
    "foreignBridge": {
        "address": "0x3f5ce5fbfe3e9af3971dd833d26ba9b5c936f0be",
        "deployedBlockNumber": 456654,
        "erc677": {
            "address": "0x41a29780309dc2582f080f6af89953be3435679a"
        }
    }
}

ERC20-to-ERC20 mode example:

{
    "homeBridge": {
        "address": "0x765a0d90e5a5773deacbd94b2dc941cbb163bdab",
        "deployedBlockNumber": 789987,
        "erc677": {
            "address": "0x269f57f5ae5421d084686f9e353f5b7ee6af54c2"
        }
    },
    "foreignBridge": {
        "address": "0x7ae703ea88b0545eef1f0bf8f91d5276e39be2f7",
        "deployedBlockNumber": 567765
    }
}

Install and configure the Oracle

1. Initialize the monorepository.

2. Go to the oracle sub-repository:

cd oracle

3. Create a .env file:

cp .env.example .env

2. Fill in the required information using the JSON output data. Check Configuration to see their explanation.

Run the Processes

There are two options to run the TokenBridge processes:

1. Docker containers. This requires Docker and Docker Compose. If you are on Linux, it's also recommended that you create a docker group and add your user to it, so that you can use the CLI without sudo.
2. Yarn Package Manager.

Docker

• While running the bridge containers for the first time use

  env ORACLE_VALIDATOR_ADDRESS=<validator address> \
    env ORACLE_VALIDATOR_ADDRESS_PRIVATE_KEY=<validator address private key> \
    docker-compose -f docker-compose-build.yml -f docker-compose.yml up -d --build
  

• For further launches (or in case of usage an official docker image) use

  env ORACLE_VALIDATOR_ADDRESS=<validator address> \
    env ORACLE_VALIDATOR_ADDRESS_PRIVATE_KEY=<validator address private key> \
    docker-compose up --d
  

All watcher & sender services launch when docker-compose is called.

Redis and RabbitMQ data are placed in ~/bridge_data directory. In case you need to reset your bridge or setup a new one (with different configuration) you must delete this directory to prevent old data from being read.

Note: To view the Docker logs:

• chdir to the directory containing the docker-compose.yml file used to run the bridge instance
• View the logs : docker-compose logs

Yarn

• redis-server starts Redis. redis-cli ping will return a pong if Redis is running.
• rabbitmq-server starts RabbitMQ. Use rabbitmqctl status to check if RabbitMQ is running.
• yarn watcher:signature-request
• yarn watcher:collected-signatures
• yarn watcher:affirmation-request
• yarn sender:home
• yarn sender:foreign

Bridge UI

See the UI instructions to configure and use the optional Bridge UI.

Build the image without running the oracle

To build the image change the directory:

cd oracle

And run the docker composer:

docker-compose -f docker-compose-build.yml build

Rollback the Last Processed Block in Redis

If the bridge does not handle an event properly (i.e. a transaction stalls due to a low gas price), the Redis DB can be rolled back. You must identify which watcher needs to re-run. For example, if the validator signatures were collected but the transaction with signatures was not sent to the Foreign network, the collected-signatures watcher must look at the block where the corresponding CollectedSignatures event was raised.

Execute this command in the bridge root directory:

for local installation:

bash ./reset-lastBlock.sh <watcher> <block num>

for Docker installation:

docker-compose exec bridge_affirmation bash ./reset-lastBlock.sh <watcher> <block num>

where the watcher could be one of:

• signature-request
• collected-signatures
• affirmation-request

Configuration parameters

Please refer to Configuration.

Useful Commands for Development

RabbitMQ

Command	Description
rabbitmqctl list_queues	List all queues
rabbitmqctl purge_queue home	Remove all messages from home queue
rabbitmqctl status	check if rabbitmq server is currently running
rabbitmq-server	start rabbitMQ server

Redis

Use redis-cli

Command	Description
KEYS *	Returns all keys
SET signature-request:lastProcessedBlock 1234	Set key to hold the string value.
GET signature-request:lastProcessedBlock	Get the key value.
DEL signature-request:lastProcessedBlock	Removes the specified key.
FLUSHALL	Delete all the keys in all existing databases.
redis-cli ping	check if redis is running.
redis-server	start redis server.

Testing

yarn test

E2E tests

See the E2E README for instructions.

Notice: for docker-based installations do not forget to add docker-compose exec bridge_affirmation before the test commands listed below.

Native-to-ERC20 Mode Testing

When running the processes, the following commands can be used to test functionality.

• To send deposits to a home contract run node scripts/native_to_erc20/sendHome.js <tx num>, where <tx num> is how many tx will be sent out to deposit.

• To send withdrawals to a foreign contract run node scripts/native_to_erc20/sendForeign.js <tx num>, where <tx num> is how many tx will be sent out to withdraw.

ERC20-to-ERC20 Mode Testing

• To deposit from a Foreign to a Home contract run node scripts/erc20_to_erc20/sendForeign.js <tx num>.

• To make withdrawal to Home from a Foreign contract run node scripts/erc20_to_erc20/sendHome.js <tx num>.

ERC20-to-Native Mode Testing

• To deposit from a Foreign to a Home contract run node scripts/erc20_to_native/sendForeign.js <tx num>.

• To make withdrawal to Home from a Foreign contract run node scripts/erc20_to_native/sendHome.js <tx num>.

Configuration parameters for testing

Variable	Description
COMMON_HOME_RPC_URL	The HTTPS URL(s) used to communicate to the RPC nodes in the Home network.
COMMON_FOREIGN_RPC_URL	The HTTPS URL(s) used to communicate to the RPC nodes in the Foreign network.
USER_ADDRESS	An account - the current owner of coins/tokens.
USER_ADDRESS_PRIVATE_KEY	A private key belonging to the account.
COMMON_HOME_BRIDGE_ADDRESS	Address of the bridge in the Home network to send transactions.
HOME_MIN_AMOUNT_PER_TX	Value (in eth or tokens) to be sent in one transaction for the Home network. This should be greater than or equal to the value specified in the tokenbridge-contracts/deploy/.env file. The default value in that file is 500000000000000000, which is equivalent to 0.5.
HOME_TEST_TX_GAS_PRICE	The gas price (in Wei) that is used to send transactions in the Home network .
COMMON_FOREIGN_BRIDGE_ADDRESS	Address of the bridge in the Foreign network to send transactions.
FOREIGN_MIN_AMOUNT_PER_TX	Value (in eth or tokens) to be sent in one transaction for the Foreign network. This should be greater than or equal to the value specified in the tokenbridge-contracts/deploy/.env file. The default value in that file is 500000000000000000, which is equivalent to 0.5.
FOREIGN_TEST_TX_GAS_PRICE	The gas price (in Wei) that is used to send transactions in the Foreign network .

Contributing

See the CONTRIBUTING document for contribution, testing and pull request protocol.

License

This project is licensed under the GNU Lesser General Public License v3.0. See the LICENSE file for details.