* all: work for eth1/2 transtition
* consensus/beacon, eth: change beacon difficulty to 0
* eth: updates
* all: add terminalBlockDifficulty config, fix rebasing issues
* eth: implemented merge interop spec
* internal/ethapi: update to v1.0.0.alpha.2
This commit updates the code to the new spec, moving payloadId into
it's own object. It also fixes an issue with finalizing an empty blockhash.
It also properly sets the basefee
* all: sync polishes, other fixes + refactors
* core, eth: correct semantics for LeavePoW, EnterPoS
* core: fixed rebasing artifacts
* core: light: performance improvements
* core: use keyed field (f)
* core: eth: fix compilation issues + tests
* eth/catalyst: dbetter error codes
* all: move Merger to consensus/, remove reliance on it in bc
* all: renamed EnterPoS and LeavePoW to ReachTDD and FinalizePoS
* core: make mergelogs a function
* core: use InsertChain instead of InsertBlock
* les: drop merger from lightchain object
* consensus: add merger
* core: recoverAncestors in catalyst mode
* core: fix nitpick
* all: removed merger from beacon, use TTD, nitpicks
* consensus: eth: add docstring, removed unnecessary code duplication
* consensus/beacon: better comment
* all: easy to fix nitpicks by karalabe
* consensus/beacon: verify known headers to be sure
* core: comments
* core: eth: don't drop peers who advertise blocks, nitpicks
* core: never add beacon blocks to the future queue
* core: fixed nitpicks
* consensus/beacon: simplify IsTTDReached check
* consensus/beacon: correct IsTTDReached check
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
* cmd, core: add flag --dev.gaslimit to allow configuring initial block gas limit in dev mode
* core: use provided gaslimit
Co-authored-by: Martin Holst Swende <martin@swende.se>
* core: write test showing that TD is not stored properly at genesis
The ToBlock method applies a default value for an empty
difficulty value. This default is not carried over through the Commit
method because the TotalDifficulty database write writes the
original difficulty value (nil) instead of the defaulty value
present on the genesis Block.
Date: 2021-10-22 08:25:32-07:00
Signed-off-by: meows <b5c6@protonmail.com>
* core: write TD value from Block, not original genesis value
This an issue where a default TD value was not written to
the database, resulting in a 0 value TD at genesis.
A test for this issue was provided at 90e3ffd393
Date: 2021-10-22 08:28:00-07:00
Signed-off-by: meows <b5c6@protonmail.com>
* core: fix tests by adding GenesisDifficulty to expected result
See prior two commits.
Date: 2021-10-22 09:16:01-07:00
Signed-off-by: meows <b5c6@protonmail.com>
* les: fix test with genesis change
Co-authored-by: Martin Holst Swende <martin@swende.se>
Copy the CliqueConfig instead of reusing the pointer.
This makes DeveloperGenesisBlock thread safe and prevents it from
changing params.AllCliqueProtocolChanges.Clique.Epoch.
* accounts/abi/bind: fix bounded contracts and sim backend for 1559
* accounts/abi/bind, ethclient: don't rely on chain config for gas prices
* all: enable London for all internal tests
* les: get receipt type info in les tests
* les: fix weird test
Co-authored-by: Martin Holst Swende <martin@swende.se>
This is the initial implementation of EIP-1559 in packages core/types and core.
Mining, RPC, etc. will be added in subsequent commits.
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Co-authored-by: lightclient@protonmail.com <lightclient@protonmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
This adds support for EIP-2718 typed transactions as well as EIP-2930
access list transactions (tx type 1). These EIPs are scheduled for the
Berlin fork.
There very few changes to existing APIs in core/types, and several new APIs
to deal with access list transactions. In particular, there are two new
constructor functions for transactions: types.NewTx and types.SignNewTx.
Since the canonical encoding of typed transactions is not RLP-compatible,
Transaction now has new methods for encoding and decoding: MarshalBinary
and UnmarshalBinary.
The existing EIP-155 signer does not support the new transaction types.
All code dealing with transaction signatures should be updated to use the
newer EIP-2930 signer. To make this easier for future updates, we have
added new constructor functions for types.Signer: types.LatestSigner and
types.LatestSignerForChainID.
This change also adds support for the YoloV3 testnet.
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Felix Lange <fjl@twurst.com>
Co-authored-by: Ryan Schneider <ryanleeschneider@gmail.com>
The PR makes use of the stacktrie, which is is more lenient on resource consumption, than the regular trie, in cases where we only need it for DeriveSha
Removes the yolov2 definition, adds yolov3, including EIP-2565. This PR also disables some of the erroneously generated blockchain and statetests, and adds the new genesis hash + alloc for yolov3.
This PR disables the CLI switches for yolo, since it's not complete until we merge support for 2930.
This change introduces garbage collection for the light client. Historical
chain data is deleted periodically. If you want to disable the GC, use
the --light.nopruning flag.
* cmd/utils: make goerli the default testnet
* cmd/geth: explicitly rename testnet to ropsten
* core: explicitly rename testnet to ropsten
* params: explicitly rename testnet to ropsten
* cmd: explicitly rename testnet to ropsten
* miner: explicitly rename testnet to ropsten
* mobile: allow for returning the goerli spec
* tests: explicitly rename testnet to ropsten
* docs: update readme to reflect changes to the default testnet
* mobile: allow for configuring goerli and rinkeby nodes
* cmd/geth: revert --testnet back to ropsten and mark as legacy
* cmd/util: mark --testnet flag as deprecated
* docs: update readme to properly reflect the 3 testnets
* cmd/utils: add an explicit deprecation warning on startup
* cmd/utils: swap goerli and ropsten in usage
* cmd/geth: swap goerli and ropsten in usage
* cmd/geth: if running a known preset, log it for convenience
* docs: improve readme on usage of ropsten's testnet datadir
* cmd/utils: check if legacy `testnet` datadir exists for ropsten
* cmd/geth: check for legacy testnet path in console command
* cmd/geth: use switch statement for complex conditions in main
* cmd/geth: move known preset log statement to the very top
* cmd/utils: create new ropsten configurations in the ropsten datadir
* cmd/utils: makedatadir should check for existing testnet dir
* cmd/geth: add legacy testnet flag to the copy db command
* cmd/geth: add legacy testnet flag to the inspect command
* core, eth: some fixes for freezer
* vendor, core/rawdb, cmd/geth: add db inspector
* core, cmd/utils: check ancient store path forceily
* cmd/geth, common, core/rawdb: a few fixes
* cmd/geth: support windows file rename and fix rename error
* core: support ancient plugin
* core, cmd: streaming file copy
* cmd, consensus, core, tests: keep genesis in leveldb
* core: write txlookup during ancient init
* core: bump database version
This PR adds a new fork which disables EIP-1283. Internally it's called Petersburg,
but the genesis/config field is ConstantinopleFix.
The block numbers are:
7280000 for Constantinople on Mainnet
7280000 for ConstantinopleFix on Mainnet
4939394 for ConstantinopleFix on Ropsten
9999999 for ConstantinopleFix on Rinkeby (real number decided later)
This PR also defaults to using the same ConstantinopleFix number as whatever
Constantinople is set to. That is, it will default to mainnet behaviour if ConstantinopleFix
is not set.This means that for private networks which have already transitioned
to Constantinople, this PR will break the network unless ConstantinopleFix is
explicitly set!
* geth/core/eth: implement constantinople override flag
* les: implemnent constantinople override flag for les clients
* cmd/geth, eth, les: fix typo, move flag to experimentals
* cmd, consensus, core, miner: instatx clique for --dev
* cmd, consensus, clique: support configurable --dev block times
* cmd, core: allow --dev to use persistent storage too
Tests are now included as a submodule. This should make updating easier
and removes ~60MB of JSON data from the working copy.
State tests are replaced by General State Tests, which run the same test
with multiple fork configurations.
With the new test runner, consensus tests are run as subtests by walking
json files. Many hex issues have been fixed upstream since the last
update and most custom parsing code is replaced by existing JSON hex
types. Tests can now be marked as 'expected failures', ensuring that
fixes for those tests will trigger an update to test configuration. The
new test runner also supports parallel execution and the -short flag.
With this commit, core/state's access to the underlying key/value database is
mediated through an interface. Database errors are tracked in StateDB and
returned by CommitTo or the new Error method.
Motivation for this change: We can remove the light client's duplicated copy of
core/state. The light client now supports node iteration, so tracing and storage
enumeration can work with the light client (not implemented in this commit).
This commit solves several issues concerning the genesis block:
* Genesis/ChainConfig loading was handled by cmd/geth code. This left
library users in the cold. They could specify a JSON-encoded
string and overwrite the config, but didn't get any of the additional
checks performed by geth.
* Decoding and writing of genesis JSON was conflated in
WriteGenesisBlock. This made it a lot harder to embed the genesis
block into the forthcoming config file loader. This commit changes
things so there is a single Genesis type that represents genesis
blocks. All uses of Write*Genesis* are changed to use the new type
instead.
* If the chain config supplied by the user was incompatible with the
current chain (i.e. the chain had already advanced beyond a scheduled
fork), it got overwritten. This is not an issue in practice because
previous forks have always had the highest total difficulty. It might
matter in the future though. The new code reverts the local chain to
the point of the fork when upgrading configuration.
The change to genesis block data removes compression library
dependencies from package core.
* common: remove CurrencyToString
Move denomination values to params instead.
* common: delete dead code
* common: move big integer operations to common/math
This commit consolidates all big integer operations into common/math and
adds tests and documentation.
There should be no change in semantics for BigPow, BigMin, BigMax, S256,
U256, Exp and their behaviour is now locked in by tests.
The BigD, BytesToBig and Bytes2Big functions don't provide additional
value, all uses are replaced by new(big.Int).SetBytes().
BigToBytes is now called PaddedBigBytes, its minimum output size
parameter is now specified as the number of bytes instead of bits. The
single use of this function is in the EVM's MSTORE instruction.
Big and String2Big are replaced by ParseBig, which is slightly stricter.
It previously accepted leading zeros for hexadecimal inputs but treated
decimal inputs as octal if a leading zero digit was present.
ParseUint64 is used in places where String2Big was used to decode a
uint64.
The new functions MustParseBig and MustParseUint64 are now used in many
places where parsing errors were previously ignored.
* common: delete unused big integer variables
* accounts/abi: replace uses of BytesToBig with use of encoding/binary
* common: remove BytesToBig
* common: remove Bytes2Big
* common: remove BigTrue
* cmd/utils: add BigFlag and use it for error-checked integer flags
While here, remove environment variable processing for DirectoryFlag
because we don't use it.
* core: add missing error checks in genesis block parser
* common: remove String2Big
* cmd/evm: use utils.BigFlag
* common/math: check for 256 bit overflow in ParseBig
This is supposed to prevent silent overflow/truncation of values in the
genesis block JSON. Without this check, a genesis block that set a
balance larger than 256 bits would lead to weird behaviour in the VM.
* cmd/utils: fixup import
This commit implements EIP158 part 1, 2, 3 & 4
1. If an account is empty it's no longer written to the trie. An empty
account is defined as (balance=0, nonce=0, storage=0, code=0).
2. Delete an empty account if it's touched
3. An empty account is redefined as either non-existent or empty.
4. Zero value calls and zero value suicides no longer consume the 25k
reation costs.
params: moved core/config to params
Signed-off-by: Jeffrey Wilcke <jeffrey@ethereum.org>
According to our own instructions the genesis config attribute should be
"config". The genesis definition in the go code, however, has a field
called `ChainConfig`. This field now has a `json:"config"` struct tag so
that the json is properly unmarshalled.
This fixes#2482
Added chain configuration options and write out during genesis database
insertion. If no "config" was found, nothing is written to the database.
Configurations are written on a per genesis base. This means
that any chain (which is identified by it's genesis hash) can have their
own chain settings.
Added a `Difference` method to `types.Transactions` which sets the
receiver to the difference of a to b (NOTE: not a **and** b).
Transaction pool subscribes to RemovedTransactionEvent adding back to
those potential missing from the chain.
When a chain re-org occurs remove any transactions that were removed
from the canonical chain during the re-org as well as the receipts that
were generated in the process.
Closes#1746
* Update => SyncIntermediate
* Added SyncObjects
SyncIntermediate only updates whatever has changed, but, as a side
effect, requires much more disk space.
SyncObjects will only sync whatever is required for a block and will not
save intermediate state to disk. As drawback this requires more time
when more txs come in.
You can set the nonce of the block with `--genesisnonce`. When the
genesis nonce changes and it doesn't match with the first block in your
database it will fail. A new `datadir` must be given if the nonce of the
genesis block changes.
* Add params package with exported variables generated from
github.com/ethereum/common/blob/master/params.json
* Use params package variables in applicable places
* Add check for minimum gas limit in validation of block's gas limit
* Remove common/params.json from go-ethereum to avoid
outdated version of it
